Emplois “electronic load” au Canada – Page 38

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Delivery Truck Driver - Class 5

  Canada

  23–24 $/hTemps plein

  ED

  Eleven Distribution Canada Corp

  2+ ansCandidates need a valid Class 5 licence with a clean driving record and at least 2 years of heavy truck experience. They must pass a road test and a criminal record check, be able to lift up to 50 pounds, and communicate clearly with customers.

  Electronic logbook, Liftgate, Delivery truck

  1 mois

  Class 1 Delivery Truck Driver

  Canada

  16–35 $/h

  ED

  Eleven Distribution Canada Corp

  2+ ansCandidates need a valid Class 1 licence with a clean driver's abstract, at least 2 years of recent heavy truck experience, knowledge of safety rules and hours of service, and the ability to lift 50 lbs.

  logbook, smartphone, delivery truck

• 1 mois

  Aviation Pilot

  Kleinburg, ON

  Temps plein

  TP

  TransCanada PipeLines Limited

  Candidates need a Canadian commercial pilot licence with at least 3000 hours on turbine helicopters, a Class 1 aviation medical, and type experience on AS350B3, H125, or BH206 aircraft. They also need a restricted radiotelephone licence and a clean driving record.

  GPS, electronic mapping systems, aircraft radio

• 1 mois

  Instrumentation Technician

  Windsor, NS

  53k–83k $/anTemps plein

  

  BioVectra Inc.

  2+ ansCandidates need a diploma in instrumentation or a related field, 2+ years of related experience and 1+ year in a manufacturing environment. Strong troubleshooting, drawing-reading and communication skills are needed, and a Red Seal certification is an asset.

  PLC, HMI, SCADA, DCS, CMMS, calibration equipment

• 1 mois

  Principal Engineer – Materials and Process

  Dartmouth, NS

  Temps plein

  UE

  Ultra Electronics Maritime Systems Inc (Canadian Federal)

  12+ ansCandidates need a Master's or PhD in a materials or engineering discipline and 12+ years of defense, aerospace, marine or subsea experience. Deep knowledge of metallic, polymer and ceramic systems, corrosion, fatigue and fracture, and eligibility for a security clearance are required.

  Packaging, 3D Printing, Leadership, Manufacturing processes, Machining, Regulatory compliance

• 1 mois

  Test Technologist

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  CoolIT needs candidates with a diploma or degree in electrical, electronics, mechanical or a related field, plus hands-on experience with instrumentation and bench test tools. Strong data analysis, root cause analysis and programming skills in Python or C/C++ are also required.

  Oscilloscope, Power analyzer, Logic analyzer, Multimeter, DAQ, SolidWorks

• 1 mois

  Heavy Duty Mechanic

  Manitoba

  Temps plein

  UR

  United Rentals of Canada, Inc.

  5+ ansCandidates need a high school diploma, a valid driver's licence with a good driving record, and 5+ years of experience repairing equipment. They must own their tools, read schematics well, and communicate clearly with customers and teammates.

  diesel engines, hydraulic systems, diagnostic programs, schematics, service vehicle

• 1 mois

  HVAC Controls Technician (Building Automation)

  Winnipeg, MB

  30,80–42,56 $/hTemps plein

  JC

  Johnson Controls LP CAN

  2+ ansJohnson Controls needs a technical associate degree with two years of field experience, or four years of equivalent building automation experience, including panel controls programming. Candidates should have project management experience, communicate technical material to non-technical people, work independently and have strong computer skills.

  Johnson Controls configuration and commissioning tools, electronic test equipment

  1 mois

  HVAC O&M Controls Technician

  Richmond Hill, ON

  32–47 $/hTemps plein

  JC

  Johnson Controls LP CAN

  4+ ansCandidates need at least four years of commercial controls troubleshooting experience in HVAC, plus a vocational or technical diploma or two years of servicing electronic or mechanical systems. Strong communication, writing, and knowledge of control theory and building automation systems are required.

  Building automation software, Controllers

• 1 mois

  Technicien en électricité et automatisation / Electrical and Automation Technician

  Bromont, QC +1

  Sur placeTemps plein

  CA

  CAN ASA-Jones Lang LaSalle Real Estate Services, Inc.

  Candidates need a DEC in industrial electronics, industrial automation or electrical engineering, or a DEP in electromechanics or industrial electricity, plus relevant experience. A valid driver's licence, troubleshooting ability, teamwork and physical fitness for travel and on-call work are also required.

  PLC, HMI, SCADA, UPS, génératrices, relais de protection

• 1 mois

  Senior Manager, Cloud Development

  Canada

  Sur placeTemps plein

  SE

  Samsung Electronics Canada, Inc.

  Samsung Electronics Canada needs a candidate with a college diploma or higher, practical experience building and managing applications on GCP, and proficiency in Python, Java, JavaScript, Go or Node.js. Knowledge of machine learning, CI/CD and infrastructure-as-code tools is also required.

  Google Cloud Platform, Terraform, Jenkins, GitLab CI/CD, CircleCI, BigQuery

• 1 mois

  Director, eDiscovery

  Canada

  Temps plein

  BL

  Bright Labs Services LLC

  4+ ansCandidates need a business, technical or law-related degree, extensive hands-on Relativity experience and four years as a consultant in computer forensics and eDiscovery. Strong communication skills, ability to work evenings and weekends, and current U.S. work authorization are required.

  Relativity, kCura, deNIST

• 1 mois

  Senior Electrical Draftperson - EST

  Esterhazy, SK

  Temps plein

  MP

  Mosaic Potash Esterhazy Limited Partnership

  3+ ansMosaic Potash Esterhazy needs two years of engineering technology training in electrical drafting or equivalent experience, and at least three years of industrial drafting experience. Candidates should know ISA and SAMA symbology, use a computer-aided drafting system well, and understand the Canadian Electrical Code Part I.

  CAD system, computer programs for reports and cost estimates

  1 mois

  Electrical Draftsperson I, II, III or Sr.

  Esterhazy, SK

  Sur placeTemps plein

  MP

  Mosaic Potash Esterhazy Limited Partnership

  3+ ansCandidates need two years of engineering technology training in electrical drafting or equivalent experience, plus at least three years of industrial drafting experience. They must know CAD software, ISA and SAMA symbology, and the Canadian Electrical Code Part I.

  Electrical wiring diagrams, Control systems, Computer technology, Electronics

• 1 mois

  Stationary Mechanical Technician, NA

  Montréal, QC

  Temps plein

  

  Vantage

  3+ ansCandidates need at least three years, ideally five, of hands-on maintenance on industrial electrical and mechanical systems such as generators, UPS, HVAC and building controls. They must read engineering plans and single-line diagrams, write technical procedures, and have reliable transportation for shifts and emergencies.

  Microsoft Excel, Microsoft Word, Microsoft Outlook, building automation system

  1 mois

  HVAC Technician, NA

  Montréal, QC

  Temps plein

  

  Vantage

  3+ ansCandidates need at least three years of practical maintenance experience on industrial electrical and mechanical systems, ideally five. They must read engineering plans, write technical procedures, and be ready for shift, weekend and on-call work.

  HVAC systems, chillers, UPS, generators, switchgear, building control systems

• 1 mois

  Stationary Mechanical Technician, NA

  Québec, QC

  Temps plein

  VD

  Vantage Data Centers Canada Management, LP

  3+ ansCandidates need at least three years of practical maintenance experience on industrial electrical and mechanical systems, ideally five. They must read engineering plans and single-line diagrams, write technical procedures and use Microsoft Office and building control systems.

  Microsoft Excel, Microsoft Word, Microsoft Outlook, CMMS, Building automation systems

  1 mois

  HVAC Technician, NA

  Québec, QC

  Temps plein

  VD

  Vantage Data Centers Canada Management, LP

  3+ ansCandidates need at least three years (five preferred) of practical maintenance experience on industrial electrical and mechanical systems, including HVAC and building controls. They must read engineering plans and single-line diagrams, write technical procedures, and have reliable transportation.

  Critical Maintenance Management System (CMMS), Microsoft Outlook, Microsoft Word, Microsoft Excel, Building automation system

  1 mois

  Electrical Technician, NA

  Québec, QC

  Temps plein

  VD

  Vantage Data Centers Canada Management, LP

  3+ ansCandidates need at least three years, preferably five, of hands-on maintenance experience with industrial electrical and mechanical systems such as generators, switchgear, UPS and HVAC. They must read electrical plans and single-line diagrams and have reliable transportation for shift work.

  CMMS, UPS, diesel generator, switchgear, building automation system, Microsoft Excel

• 1 mois

  Certification Manager

  Kitchener, ON

  Sur placeTemps plein

  CD

  CS Digital (Canada) Inc.

  5+ ansCandidates need a Bachelor's degree in electrical engineering or a related field and 5+ years in certification, compliance or power electronics. They need hands-on work with UL, IEC, CSA, IEEE or NEC standards, test equipment, and third-party labs.

  grid simulators, power analyzers, load banks, oscilloscopes, data acquisition tools, power supplies

• 1 mois

  Fleet Mechanic

  New Brunswick

  Temps plein

  SC

  Scotts Canada Ltd.

  3+ ansDEP en mécanique de véhicules lourds ou expérience pertinente; Minimum de 3 ans d'expérience en réparation de systèmes majeurs; Lecture de schémas, plans et dessins techniques

  équipement de test informatisé, jauges, chariot élévateur

• 1 mois

  SMT Machine Operator/Assembler (3:30 pm – 12:00 midnight)

  Ottawa, ON

  Temps plein

  DD

  D4S DY-4 Systems Inc.

  2+ ansCandidates need at least two years of manufacturing experience, ideally with pick and place equipment, paste printers and reflow ovens. A high school diploma is required, strong teamwork and communication skills are needed, and the ability to lift and read technical drawings is expected.

  SMT placement machine, Pick and place machine, Reflow oven, Paste printer, Stencil washer, Laser marking system

• 1 mois

  Petrogas - Truck Drivers

  Slave Lake, AB +1

  Temps plein

  MT

  Millard Trucking Ltd (inactive)

  1+ ansCandidates need 1-3 years of oil and gas truck driving experience, a valid Class 1 or 3 licence with air brake endorsement, a clean driver's abstract and safety certifications such as H2S Alive, First Aid and Confined Space. They must also pass background and drug and alcohol checks.

  semi-vac truck, combo vac truck, E-Logs

• 1 mois

  Associate Verification Engineer

  Toronto, ON

  Sur placeTemps plein

  ET

  ecobee Technologies ULC

  2+ ansCandidates need a bachelor's or master's degree in electrical, computer or a related engineering field and 2+ years of hardware development and test automation experience. Hands-on lab instrument skills, Altium, Python scripting and familiarity with C and Linux are required.

  oscilloscope, electronic load, thermal chamber, logic analyzer, data logger, signal generator

18 entreprises