Emplois “coating machinery” au Canada – Page 4

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 27j

  General Labour

  Camrose, AB

  Contrat

  PP

  PERMA PIPE INC

  Candidates need to be authorized to work in Canada, reliably commute to Camrose, and pass a pre-employment drug test. They must be able to stand and walk for most of a 10-hour shift, lift up to 50 lbs, and work in industrial conditions with PPE; experience is an asset but not required.

  forklift, pipe coating equipment, foam equipment

• 28j

  Experienced Extrusion Operator Trainee

  Truro, NS

  24–26 $/h

  I

  IPG

  Candidates need previous experience with extrusion, plastics, converting, packaging, film or similar industrial manufacturing equipment. Strong mechanical aptitude, problem-solving skills and the ability to work safely in a fast-paced plant are also required.

  extrusion equipment, converting equipment, packaging machinery

  28j

  Printing (100) - Press Operator A

  Truro, NS

  24–30 $/h

  I

  IPG

  Candidates need prior printing, press or manufacturing experience, a high school diploma or equivalent, and mechanical aptitude. They must be able to work physically active 12-hour shifts on both days and nights.

  printing presses, inks, printing plates

  29j

  Technical Product Manager - Geomembrane and Specialty market

  Ontario +2

  I

  IPG

  3+ ansCandidates need 3-5 years in product management, marketing, sales or industry roles, with a preferred university degree in marketing, business or engineering. Strong negotiation, data analysis, communication and Microsoft Office skills are required, and textile or polymer knowledge is an asset.

  Microsoft Office

  29j

  6' Cast Line (017160) - Cast Line Operator

  Toronto, ON

  I

  IPG

  1+ ansCandidates need a high school diploma or GED and at least 1 year of production experience. They must read simple instructions, do basic arithmetic and lift up to 50 pounds frequently.

  Forklift, Pallet jack, Railcar unloader, Automatic core cutter, Baler, Grinder

  29j

  Coating Operator

  Cornwall, ON

  I

  IPG

  3+ ansCandidates need a high school diploma and ideally 3 years in manufacturing. A forklift licence or ability to get one is needed, along with mechanical aptitude, the ability to follow machine manuals, and good communication skills. French is an asset.

  forklift, pump truck, coating machines

  29j

  Licensed Industrial Millwright

  Cornwall, ON

  I

  IPG

  3+ ansCandidates need a Red Seal certification and 3 to 5 years of experience in industrial manufacturing. They also need precision machining, welding and fabrication skills, the ability to read blueprints, and strong troubleshooting and problem-solving abilities.

  blueprints, technical schematics

  29j

  Licensed Electro-Mechanic

  Toronto, ON

  I

  IPG

  4+ ansCandidates need an Industrial Electrical or Millwright licence and a 2-3 year diploma in electromechanical technology. IPG also asks for 4-5 years of industrial automation or manufacturing experience and the ability to read schematics and drawings.

  Hand tools, Power tools, Rigging equipment, MS Word, MS Excel, MS PowerPoint

  29j

  Millwright

  Cornwall, ON

  I

  IPG

  3+ ansCandidates need a Red Seal certification and 3 to 5 years of industrial manufacturing experience. Strong mechanical skills in machining, welding, fabrication and reading blueprints are required, along with flexibility to work shifts.

  Welding equipment, Machining equipment

• 28j

  General Labourer - Rotating Shifts

  Huntsville, ON

  

  Henkel group: Henkel operates worldwide with leading innovations, brands and technologies in two business areas: Adhesive Technologies and Consumer Brands.

  Candidates need a high school diploma or GED, the ability to work rotating day, afternoon and midnight shifts, and to stand, bend and lift up to 50 lbs. Experience in manufacturing or a warehouse is preferred but not required, and candidates must read English production orders.

  extrusion machinery, coating machinery, cutting tools

• 29j

  Conformal Coating and Robotics Technician

  Markham, ON

  

  Microart Services Inc.: is an electronic manufacturing and design services company providing circuit design, PCB layout, bare board manufacturing, PCB assembly, testing and…

  Candidates need experience operating automated machinery and working on SMT/TH or mixed-technology assemblies. They should read assembly documents, understand IPC-610 or J-STD standards, handle chemicals safely, and communicate in written and spoken English.

  Conformal coating machine, Automated sprayer

• 29j

  General Labour

  Wallaceburg, ON

  

  Select Finishing Ltd

  Candidates need a high school diploma or equivalent and a basic understanding of manufacturing procedures. Select Finishing also requires attention to detail, the ability to lift moderate to heavy objects, and knowledge of industrial health and safety rules.

  Inspection, Manage inspections of equipment, Packaging, Manufacturing processes, Attention to detail, Communication skills

  29j

  Powder Applicator

  Windsor, ON

  

  Select Finishing Ltd

  1+ ansCandidates need a high school diploma or equivalent and at least 1 year of experience in a manufacturing, production or general labour role. They must follow health and safety rules and wear PPE, and be able to stand, walk and bend for long periods.

  paint booth

  29j

  Coatings Technician

  Windsor, ON

  

  Select Finishing Ltd

  1+ ansCandidates need a high school diploma or equivalent and 1-3 years of experience in manufacturing, production or general labour. They must be able to stand and walk for long periods, follow safety procedures and wear required PPE in an industrial environment.

  E-coat production equipment

• 29j

  Production Associate, Full time Contract

  Vancouver, BC

  19,53 $/h

  PC

  Purdys Chocolatier

  Candidates need strong English communication, close attention to detail, and comfort with repetitive work and standing. Experience in a fast-paced environment and SQF food safety compliance are needed, and food equipment experience is an asset.

  food manufacturing equipment

• 29j

  Welder

  Leduc, AB

  Sur placeTemps plein

  

  Allredi

  Candidates need previous welding experience, with proficiency in MIG and arc welding and fabrication setup. They must read engineering drawings, lift up to 70 lbs, work independently and in a team, and communicate well in writing and verbally.

  MIG welder, Arc welder, Grinder, Zip disc, Band saw, Torch

• 1 mois

  Industrial Electrician

  Cambridge, ON

  44,65 $/hSur placeTemps plein

  

  CGT

  Candidates need a valid 442A or 309A electrician certificate and industrial manufacturing experience. They must troubleshoot 480V/600V power, motor controls, VFDs and PLCs, follow lockout and arc flash safety rules, and work a 12-hour rotating shift schedule.

  PLC, Maintenance laptop, VFD, CMMS, Scissor lift, Boom lift

• 1 mois

  Industrial Painter/ Sandblaster

  Thamesville, ON

  25–35 $/hTemps plein

  

  Randstad Canada

  3+ ansCandidates need at least 3 to 5 years of painting or sandblasting experience in manufacturing or automotive work, plus knowledge of chemical and high-pressure safety. Reliable transportation to Thamesville and the ability to lift heavy parts are also required.

  Airless sprayers, Pressure pots, Blasting cabinets, Spray guns, Sandblasting machinery

  1 mois

  Machine Operator

  Guelph, ON

  21,37 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need a high school diploma or GED, at least one year of manufacturing experience, and fluent English. They must stand for long periods, lift up to 55 lbs, and work in dust and noise while wearing full PPE.

  Forklift, Computer-controlled machine interfaces

  1 mois

  Mechanical Assembler - Edmonton

  Edmonton, AB

  Contrat

  

  Randstad Canada

  1+ ansCandidates need at least a high school diploma or GED, plus ability to lift heavy materials and work in Canada without sponsorship. Prior manufacturing or assembly experience, reading drawings and using measuring tools are expected.

  Dynamic Machine Management (DMM), Enovia, Vault, powder coating system, spray guns, measuring equipment

  1 mois

  Machine Operator

  Guelph, ON

  21,37 $/hTemps plein

  

  Randstad Canada

  1+ ansCandidates need a high school diploma or GED, at least one year of manufacturing experience and full English reading, writing and speaking. Physical stamina for standing for long shifts, lifting up to 55 lbs and wearing PPE are also required.

  forklift, computer-controlled equipment interfaces

  1 mois

  Industrial Painter - Night Shift

  Brantford, ON

  23–25 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least one year of industrial painter experience in metal manufacturing, with hands-on use of spray equipment and surface prep tools. Strong attention to detail, clear spoken and written English, the ability to lift 50 lbs and stand for 10-hour shifts, and full night shift availability are required.

  Airless spray equipment, Conventional spray equipment, Spray guns, Surface prep tools, PPE

  1 mois

  Technical Systems Sales Specialist

  Calgary, AB

  Temps plein

  

  Randstad Canada

  2+ ansCandidates need a mechanical, chemical, process, or industrial engineering technology diploma or degree and at least 2 years of experience in industrial finishing or fluid handling. CET designation is highly preferred, along with AutoCAD, Excel, and ERP/CRM skills.

  AutoCAD, Microsoft Excel, NetSuite

  1 mois

  Powder Coating - Machine Operator

  Guelph, ON

  21,37 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least 1 year of experience operating machinery in a factory or industrial setting, with chemical processing, paint or powder coating experience preferred. They must have a high school diploma or GED, be able to stand and lift up to 55 lbs for a full shift, wear respirators and other PPE, and read and write English well.

  forklift, automated powder coating equipment

9 entreprises