Emplois “Electrical diagnostic tools” au Canada – Page 42

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  310T

  Dundas, ON

  43–48 $/hTemps plein

  

  Randstad Canada

  5+ ansCandidates need a valid 310T or Red Seal Truck & Coach Technician licence and 5+ years of hands-on commercial tractor-trailer maintenance experience. A Class D/3 licence with air brake endorsement (or the ability to obtain it within 6 months) and the ability to lift up to 50 lbs are also required.

  Handheld diagnostic computers, Motor analyzers, Welding equipment, Hydraulic equipment, Electronic work order system

  1 mois

  Senior Embedded Software Engineer - BSP and Secure Bootloaders

  Kanata, ON

  79,66–86,59 $/hContrat

  

  Randstad Canada

  8+ ansCandidates need 8+ years of BSP, QNX or Linux kernel and bootloader work, at least two full board bring-ups, and a Bachelor's degree in a technical field. They also need strong low-level C and assembly skills, ARM Cortex knowledge, and hands-on experience with secure boot, HSM or SHE and cryptography.

  JTAG debugger, oscilloscope, logic analyzer, Git, SVN

  1 mois

  Intermediate Embedded Software Engineer – BSP and Bootloaders

  Kanata, ON

  76,20–79,66 $/hContrat

  

  Randstad Canada

  4+ ansCandidates need a bachelor's degree in a technical field, 4+ years of BSP and bootloader work on Linux or QNX, and 2+ full target board bring-ups. Strong low-level C, ARM Cortex knowledge, and lab debugging with JTAG, oscilloscopes and logic analyzers are required.

  JTAG debugger, oscilloscope, logic analyzer, Git, SVN

  1 mois

  Service Technician

  Mississauga, ON

  43–47 $/hTemps plein

  

  Randstad Canada

  3+ ansCandidates need at least 3 years of hands-on high-voltage industrial electrical troubleshooting (480V/600V, VFDs, control panels, ladder logic) and mechanical maintenance experience. They must work independently, hold a valid Ontario G licence with a clean driving record, and a Millwright or Electrician trade licence is an asset.

  digital multimeter, PLC, precision tools, diagnostic equipment

  1 mois

  Senior fork lift mechanic

  Vaudreuil-Dorion, QC

  30–45 $/hTemps plein

  

  Randstad Canada

  10+ ansCandidates need a DEP in heavy vehicle mechanics or electromechanics, or other relevant training, plus at least 10 years of forklift maintenance experience. The company wants someone who enjoys challenges, is open-minded and is passionate about the work.

  forklift

  1 mois

  Tools Mechanicien

  Saint-Hubert, QC

  25–50 $/hTemps plein

  

  Randstad Canada

  Candidates need practical experience as a small engine, hydraulic, automotive or industrial mechanic, or strong hands-on mechanical skills from farm or ATV work. Methodical diagnostic ability and good customer service are required, and no specific diploma is needed since training is provided in-house.

  Equipment maintenance, Troubleshooting, Cleaning, Problem solving, Customer service, Coaching

  1 mois

  Afternoon Millwright

  Kitchener, ON

  44–46 $/hTemps plein

  

  Randstad Canada

  3+ ansCandidates need 3+ years of hands-on industrial maintenance experience, with hydraulic and pneumatic repair skills, MIG welding, and the ability to read schematics. A 433A Red Seal is preferred, and familiarity with Allen-Bradley, Siemens or Schneider PLCs is an asset.

  PLC, hydraulic systems, pneumatic systems, shear line, tube bender, coil machine

  1 mois

  Systems Engineers – End-to-End Software Diagnostics and Observability

  Kanata, ON

  72,73–96,98 $/hContrat

  

  Randstad Canada

  3+ ansCandidates need a Bachelor's or Master's in a computing, engineering or data field, strong Python skills, and familiarity with AI/ML workflows, REST APIs, Git, Docker and GCP. The autonomous role needs 4 to 6 years of experience and the mentored role needs 3 to 5 years.

  Python, GCP, Vertex AI, BigQuery, Docker, LangChain

  1 mois

  Electrotechnicien

  LaSalle, QC

  37–45 $/hTemps plein

  

  Randstad Canada

  5+ ansCandidates need a DEC or AEC in Automation or Industrial Electronics, a valid License C, and 5 to 10 years of relevant experience. Strong PLC skills, robotics aptitude, autonomy and the ability to communicate in French are required.

  PLC, industrial robots, HMI, sensors, electrical design software

  1 mois

  Mécanicien équipement lourd

  LaSalle, QC

  25–40 $/hContrat

  

  Randstad Canada

  Candidates need substantial hands-on experience repairing heavy industrial machinery, transport trucks or construction equipment. Strong troubleshooting skills, attention to detail, autonomy and full availability for a weekday day shift are also required.

  Diagnostic troubleshooting software, Internal tracking system

  1 mois

  Aerial Field Tech- Rigger

  Spruce Grove, AB

  22–41 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of basic construction experience and hands-on tool skills. Knowledge of OTDR testing and fiber fusion, a valid Canadian driver's licence with a clean abstract, and a clean criminal record check are required, along with the ability to work at heights and outdoors.

  OTDR test equipment, Fiber fusion equipment

  1 mois

  Aerial Field Tech- Rigger

  Calgary, AB

  22–41 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of basic construction experience and hands-on tool skills, plus knowledge of OTDR testing and fiber fusion. They must read engineered and electrical drawings, hold a valid Canadian driver's licence with a clean abstract, pass a criminal record check and drug and alcohol testing, and be legally authorized to work in Canada.

  OTDR

  1 mois

  Licensed Diesel Truck Mechanic

  Edmonton, AB

  44–48 $/hTemps plein

  

  Randstad Canada

  5+ ansCandidates need a Red Seal or Journeyman Heavy Duty licence with CVIP sign-off privileges, 5+ years of hands-on diesel tractor-trailer experience, a valid Class 5 driver's licence and their own set of trade tools. A clear driver's abstract is required.

  laptop diagnostic tools, diagnostic equipment, trade tools

• 1 mois

  Full-time Fleet Mechanic

  Richmond, BC

  52,27 $/h

  

  CONA Services: Coke One North America - A Coca-Cola System IT Services Company

  3+ ansCandidates need a Journeymen Heavy Duty Mechanic Ticket, a high school diploma or GED, and prior mechanic experience on light and heavy equipment. A Class 1 driver's licence or eligibility for Class 1 training is required.

  Automotive hand tools, Forklift, Diagnostic equipment

  1 mois

  Winnipeg - Full-Time Cooler Service Field Technician

  Winnipeg, MB

  31,79 $/h

  

  CONA Services: Coke One North America - A Coca-Cola System IT Services Company

  1+ ansCandidates need a high school diploma or GED, one to three years of general technical experience, and at least one year of refrigeration or HVAC experience. Refrigeration or HVAC certification, a valid driver's licence with a clean three-year driving record, and the ability to bend, kneel and lift up to 50 pounds are also needed.

  Troubleshoot, Customer relations, Communication skills, HVAC, Plumbing, Computer skills

• 1 mois

  Truck & Coach Technician / Apprentice Technician

  Kitchener, ON +1

  43,21–46,28 $/hTemps plein

  

  theregio03

  5+ ansCandidates need a valid Ontario College of Trades 310T Truck & Coach Technician Certificate, or apprentice standing (1st to 4th year), or a 310S Automotive Technician Certificate with 5 years of journeyperson experience. A valid G licence and a satisfactory driving record are required, with the ability to obtain a DZ licence during probation (or hold one at hire), plus a clean criminal and judicial matters check for bondability.

  Pro-Link, Hand tools, Test equipment

• 1 mois

  Commercial HVAC Service Technician

  Montréal, QC +1

  Temps plein

  C

  CaptiveAire: CaptiveAire® is the nation's leading manufacturer of commercial kitchen ventilation systems, and now provides a complete solution of fans, heaters,…

  Candidates need a valid driver's licence with a clean record, a strong understanding of single and three-phase electrical systems and refrigeration cycles, and the ability to read commercial wiring schematics. They must lift up to 50 lbs, work on ladders and roofs, and be safety minded. French is preferred but not required.

  laptop, iPhone, iPad, HVAC diagnostic equipment

  1 mois

  Commercial HVAC Service Technician

  Nova Scotia

  Temps plein

  C

  CaptiveAire: CaptiveAire® is the nation's leading manufacturer of commercial kitchen ventilation systems, and now provides a complete solution of fans, heaters,…

  2+ ansCandidates need at least 2 years of hands-on commercial HVAC experience, a valid driver's licence with a clean record, and strong knowledge of electrical systems and refrigeration cycles. They must be fluent in English and French, able to lift 50 lbs and work on ladders and roofs, and willing to complete a 1-week training course in Lancaster, PA.

  laptop, iPhone, iPad, work vehicle, HVAC testing equipment

  1 mois

  Commercial HVAC Service Technician

  Quebec

  Temps plein

  C

  CaptiveAire: CaptiveAire® is the nation's leading manufacturer of commercial kitchen ventilation systems, and now provides a complete solution of fans, heaters,…

  Candidates need a valid driver's licence with a clean driving record, a good grasp of single and three-phase electrical systems and refrigeration cycles, and the ability to read wiring schematics. Strong troubleshooting, communication and safety awareness are required, and the ability to lift up to 50 lbs and work on roofs and ladders. Prior HVAC experience is a plus but not required.

  laptop, iPhone, iPad, work vehicle, technical equipment

• 1 mois

  Data Center Technician L2

  Saint-Jérôme, QC

  

  Milestone Technologies, Inc.: Milestone Technologies is a global IT Services and Digital Solutions company based in Silicon Valley that helps hundreds of leading corporations…

  2+ ansCandidates need 2 to 3 years in data center operations, hands-on rack and stack and structured cabling skills, basic networking and Linux knowledge, and strong written and spoken English. Ticketing system experience and the ability to lift 50 lbs are also required.

  ServiceNow, Jira, DCIM tools, Cisco CLI, Arista CLI, Juniper CLI

• 1 mois

  Trades 2 - Mechanic (REPOST)

  British Columbia

  CO

  City of Richmond

  2+ ansCandidates need a completed automotive, heavy duty or commercial transport mechanic apprenticeship, Grade 12, and 2 to 5 years of journeyman experience. They must hold a B.C. Certificate of Qualification, a Class 3 licence with air endorsement, and CVIP certification.

  FASTER, Infor Public Sector, Microsoft Office, Welding equipment, Diagnostic equipment

• 1 mois

  Heavy Duty Mechanic

  Greater Sudbury, ON

  20–28 $/hTemps plein, Contrat

  

  DMC Mining Services: Engineering services that DMC Mining Services provides:

  3+ ansCandidates need 3 to 5 years of underground experience and comfort working at heights. A heavy equipment mechanic certificate or equivalent and the ability to read electrical and hydraulic prints are needed, along with a personal basic tool inventory.

  diagnostic equipment, measuring tools, basic trade tools, welding equipment, hoist

  1 mois

  Mechanic (Heavy Duty) - FIFO

  Cadomin, AB

  20–28 $/hTemps plein, Contrat

  

  DMC Mining Services: Engineering services that DMC Mining Services provides:

  3+ ansCandidates need underground mining experience, ideally 3 to 5 years, and a heavy duty mechanic certificate is preferred. Welding, hydraulic and electrical skills, and comfort working at heights are assets or requirements.

  welding equipment, drills, grinders, diagnostic equipment, measuring tools, forklift

• 1 mois

  Red Seal Instrument and Control Technician

  Manitoba

  Temps plein

  

  Canadian Nuclear Laboratories LTD

  Candidates need a high school diploma and a Red Seal Instrument and Controls Technician certificate. Five or more years of varied industrial experience is an asset, along with hands-on troubleshooting, blueprint reading, CAD and strong communication skills. Reliability Status with Site Access Security Clearance eligibility is required.

  CAD, Hand tools, Power tools, Diagnostic test equipment

8 entreprises