Emplois “small mechanical equipment” au Canada – Page 47

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  DZ Propane Delivery Driver - Seasonal

  Athens, ON

  31,15 $/hTemps plein

  

  MacEwen Petroleum Inc: MacEwen is a proudly Canadian-owned and operated fuel and convenience provider with a rich legacy spanning more than five decades.

  3+ ansCandidates need a valid DZ certification, at least three years of driving after certification, and a clean abstract with acceptable CVOR. Liquid bulk or fuel delivery experience, mechanical inclination and local geographic knowledge are required or preferred.

  forklift, boom truck, skid tank

  1 mois

  DZ Propane Delivery Driver - Seasonal

  Kemptville, ON

  31,15 $/hTemps plein

  

  MacEwen Petroleum Inc: MacEwen is a proudly Canadian-owned and operated fuel and convenience provider with a rich legacy spanning more than five decades.

  3+ ansCandidates need a valid DZ certification, at least 3 years of driving since certification, and local geographic knowledge. A clean abstract, acceptable CVOR, mechanical aptitude and customer service skills are required.

  forklift, boom truck

  1 mois

  DZ Propane Delivery Driver - Seasonal

  Pembroke, ON

  31,15 $/hTemps plein

  

  MacEwen Petroleum Inc: MacEwen is a proudly Canadian-owned and operated fuel and convenience provider with a rich legacy spanning more than five decades.

  3+ ansCandidates need a valid DZ certification, at least three years of driving after certification, and a clean abstract with acceptable CVOR. Local knowledge of the area, mechanical skill, and the ability to lift 50 pounds are also required.

  propane delivery truck, forklift, boom truck

• 1 mois

  Power Generation and Mechanical Specialist

  Edmonton, AB

  77k–101k $/an

  GO

  Government of Alberta

  6+ ansCandidates need a two-year technical diploma in heavy duty mechanics, power systems or a related field plus six years of related experience, or an equivalent combination. The employer also asks for welding, fabrication, remote-site experience, and the ability to obtain an RCMP Enhanced Reliability Status clearance.

  generators, load bank, welding equipment, machining equipment, fuel system calibration equipment

• 1 mois

  Maintenance Lead Hand Journeyperson Mechanic

  Lloydminster, AB

  Temps plein

  F

  Foremost

  3+ ans3+ gestionCandidates need a Journeyperson Mechanic certification, three to five years of lead hand experience, and a valid Class 5 driver's licence. Strong leadership, organization, communication and independent problem-solving skills are required. Manufacturing, HVAC, heating and overhead crane experience are assets.

  forklift, overhead crane, wiring diagrams, blueprints, vendor manuals

• 1 mois

  Camp Maintenance Worker - Waasigan Transmission Line Project

  Thunder Bay, ON

  300–335 $/jourSur placeTemps plein

  

  Dexterra

  Candidates need several years of general maintenance or trade experience, the ability to lift 50 lbs and work at heights and in confined spaces, and a valid full G or Class 5 licence with a clean driving record. Strong troubleshooting skills and the ability to work independently in remote conditions are required.

  skid-steer loader, diesel generator, maintenance tracking system, HVAC equipment, power tools

• 1 mois

  Refrigeration Journeyman - HVAC Specialist

  Winnipeg, MB

  Temps plein

  

  CIMCO Refrigeration

  10+ ansCandidates need a Red Seal refrigeration mechanic certification, a Gasfitter B ticket and 10+ years of journeyman experience. Hands-on experience with HVAC and refrigeration equipment, controls and automation, plus strong paperwork and communication skills, is also required.

  Microsoft 365, DDC controls, PLC, BMS, hand tools, rigging equipment

  1 mois

  Refrigeration Journeyman

  Brandon, MB

  Temps plein

  

  CIMCO Refrigeration

  10+ ansCandidates need a Red Seal Refrigeration Mechanic and Gasfitter B ticket, with 10+ years of journeyman experience. Strong HVAC and refrigeration background, controls and automation skills, and solid administrative and communication skills are required.

  Microsoft 365, hand tools, rigging equipment, BMS, DDC, PLC

• 1 mois

  Component Rebuilder L2

  Concord, ON

  Temps plein

  

  Toromont Cat: Established in 1993, Toromont Cat is a division of Toromont Industries (TSX: TIH), a publically traded, diversified growth company incorporated in…

  3+ ansCandidates need completed trade schooling in welding, automotive, small engine or industrial mechanics, plus at least three years of experience in a comparable industrial setting. Computer skills in Excel, Word and DBS are required, and knowledge of CAT SIS is an asset.

  DBS, Excel, Word, CAT SIS

• 1 mois

  Senior Process Mechanical Engineer - Water/Wastewater

  Windsor, ON +4

  HybrideTemps plein

  

  Stantec

  10+ ansStantec needs a licensed P.Eng. with a relevant engineering degree and at least 10 years of experience. Candidates must show strong process mechanical design skills, project management, budget control, client relations and clear written and oral communication.

  Mechanical engineering, Mechanical systems, Leadership, Communication skills, Client relationship management, Health and safety

  1 mois

  Senior Mechanical Designer - Canada

  Calgary, AB +5

  Sur placeTemps plein

  

  Stantec

  8+ ansCandidates need at least 8 years of industrial mechanical design experience, with mining or industrial experience required. They must be advanced in Autodesk tools such as Revit, Plant 3D, Inventor, AutoCAD and Navisworks, and have REVIT education or experience.

  Revit, AutoCAD, Plant 3D, Inventor, Navisworks, Autodesk Forma

  1 mois

  Intermediate Mechanical Engineer- Water

  Edmonton, AB +3

  Temps plein

  

  Stantec

  7+ ansStantec needs a mechanical engineering bachelor's degree, at least 7 years of HVAC, plumbing and fire protection design experience in water or wastewater, and a Canadian professional engineer licence. Candidates should know load calculation software, Revit, AutoCAD, NFPA 820 and local mechanical and plumbing codes.

  Revit, AutoCAD, HAP 6.1, Trace 3D

  1 mois

  Senior Process Engineer- Water

  Toronto, ON +11

  Temps plein

  

  Stantec

  10+ ansCandidates need a bachelor's degree in an engineering discipline, a P.Eng. licence and at least 10 years of experience. They must be strong at process mechanical design, project management, client relations and clear technical writing.

  Mechanical engineering, Mechanical systems, Leadership, Communication skills, Client relationship management, Health and safety

  1 mois

  Mechanical Technologist

  Yellowknife, NT

  HybrideTemps plein

  

  Stantec

  2+ ansCandidates need a mechanical engineering technology or engineering design diploma (or equivalent) and 2+ years of Revit and AutoCAD drafting experience. Working knowledge of Revit is required, and knowledge of building codes and mechanical systems is an asset.

  Autodesk Revit, AutoCAD

  1 mois

  Intermediate Conveyance Engineer - Water

  Burnaby, BC +6

  Temps plein

  

  Stantec

  5+ ansCandidates need a bachelor's degree in mechanical, civil or environmental engineering, a P.Eng. (or eligibility in BC), and 5 to 10 years of water or wastewater infrastructure experience. Hydraulic modelling skills in tools such as AFT Fathom, InfoWorks or WaterGEMS are required.

  AFT Fathom, InfoWorks, InfoWater, WaterGEMS, SewerGEMS, ANSYS Fluent

  1 mois

  Mechanical EIT

  Whitehorse, YT

  Sur placeTemps plein

  

  Stantec

  Candidates need a mechanical engineering degree and a licence, or a plan to get licensed in the Yukon, NWT and Nunavut. They need knowledge of national building, plumbing, fire and energy codes, and skill in Revit and AutoCAD.

  Revit, AutoCAD, Microsoft Office

  1 mois

  Mechanical Technologist

  Dartmouth, NS

  Sur placeTemps plein

  

  Stantec

  5+ ansCandidates need a mechanical engineering or engineering design technology diploma or equivalent, familiarity with building codes and mechanical systems, and working knowledge of Revit and AutoCAD. Five years of parametric modelling experience is preferred.

  Revit, AutoCAD, Microsoft Excel, Microsoft Word

• 1 mois

  Mechanical Designer (Contract)

  Stratford, ON

  29,32–38 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ ansArrow needs candidates with 2 to 5 years of mechanical design experience, ideally in manufacturing. Strong CAD skills in SolidWorks or DraftSight, knowledge of welding and fabrication, and good teamwork and communication are required.

  SolidWorks, DraftSight, MRP system, Microsoft Excel, Microsoft Word, Microsoft Outlook

  1 mois

  Program Manager

  Stratford, ON

  Temps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  3+ ansCandidates need a mechanical engineering degree or bachelor's degree with 3 to 5 or more years of experience. Strong knowledge of GD&T, mechanical drawing, process improvement and lean techniques is required, along with metal cutting, forming, welding and machining experience.

  CAD software

• 1 mois

  Mechanic (Heavy Duty Equipment) - Voisey's Bay

  Newfoundland and Labrador

  Sur placeTemps plein

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  3+ ansCandidates need at least 3 years as a mechanic in mining, construction or a similar industry, or a journeyperson certificate. They must read schematics and service manuals and diagnose diesel engines and powertrain and brake systems.

  Engine/powertrain diagnostic software, Handheld diagnostic tools, Parts and service manuals

  1 mois

  Mechanic - Musselwhite

  Thunder Bay, ON

  138k–157k $/anSur placeTemps plein

  

  The Redpath Group: Established in 1962, The Redpath Group is an experienced, full-service solutions provider to the global underground mining industry.

  5+ ansCandidates need a journeyperson certificate or five years as a mechanic in mining, construction or similar industry. They must read schematics and manuals, diagnose diesel and powertrain systems, and show basic literacy and strong leadership skills.

  Engine diagnostic software, Hydraulic systems, Electrical schematics, Parts and service manuals, Drills, Compressors

• 1 mois

  Maintenance Millwright

  Dundas, ON

  42,16 $/hSur placeTemps plein

  

  Carmeuse: Founded in 1860, Carmeuse is a Belgian-headquartered international leading manufacturer of lime, limestone and mineral-based products used in a…

  5+ ansCandidates need a Licensed Industrial Mechanical Millwright (433A) certificate and at least 5 years of industrial millwright maintenance experience. They also need skills in preventive maintenance, computerized maintenance systems, teamwork and fluent English.

  SAP, CMMS, welding equipment, power tools, hand tools, machine tools

  1 mois

  Maintenance Millwright

  Blind River, ON

  47,76 $/hSur placeTemps plein

  

  Carmeuse: Founded in 1860, Carmeuse is a Belgian-headquartered international leading manufacturer of lime, limestone and mineral-based products used in a…

  4+ ansCarmeuse needs candidates with a Licensed Industrial Mechanical Millwright certificate and at least 4 years of industrial millwright experience. Candidates should have preventative maintenance, leadership and teamwork skills, plus fluent spoken and written English.

  test instruments, hand tools, computerized maintenance management system

  1 mois

  Production Helper

  Ingersoll, ON

  36,06 $/hSur placeTemps plein

  

  Carmeuse: Founded in 1860, Carmeuse is a Belgian-headquartered international leading manufacturer of lime, limestone and mineral-based products used in a…

  Candidates need a high school diploma or GED, mechanical aptitude and knowledge of manufacturing plant equipment. Strong teamwork, a good work ethic, basic computer skills and fluent spoken and written English are required, and heavy equipment experience is an asset.

  forklift, front-end loader, bobcat, conveyor, elevator, scales

10 entreprises