Emplois “Basic measuring devices” au Canada – Page 5

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 14j

  Senior Scientist - Precision Measurements (Optical Metrology)

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need a PhD in physics or engineering plus at least 2 years of postdoctoral or industry experience. They need a proven record in high-precision measurement or detector calibration, familiarity with fiber-coupled optics, and strong communication skills.

  Optical Spectrum Analyzer, Polarization controllers, DFB lasers, Mode-locked lasers, Optical modulators, Zemax

  14j

  Senior Photonics Engineer - Experimental Nonlinear Optics

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  Candidates need a PhD in quantum optics, photonics, AMO, electrical engineering or a related field, plus research experience. They must be skilled in squeezed light, coherent detection, laser locking, RF and optoelectronic lab equipment, and Python.

  Oscilloscope, Signal generator, Spectrum analyzer, Photodiode, Python, Electro-optic modulator

  14j

  Photonics Design and Control Engineer

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need an MS or PhD in Electrical Engineering, Physics or a related field, a proven record designing high-performance integrated filters, and 2+ years testing photonic integrated circuits. Strong Python and control or optimization skills are essential.

  Python

  14j

  Superconducting Analog Component Designer

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need a PhD in physics or electrical or mechanical engineering, or a closely related field, plus at least 2 years of postdoctoral or industry experience. They need strong superconducting device physics knowledge, SPICE circuit simulation skills and Python for design and data analysis.

  SPICE, Python, COMSOL, pyTDGL

  14j

  Senior Data Scientist – Decision Intelligence

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  7+ ansXanadu needs candidates with a quantitative bachelor's degree and 7+ years in data science or applied ML, including shipped data products. Strong statistics, Python, SQL or Spark skills, and experience with noisy experimental data and mentoring are required.

  Python, SQL, Spark, AWS

  14j

  Photonics Lab Technician - Measurement (Afternoon Shift)

  Toronto, ON

  Sur placeTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansXanadu needs a candidate with a BSc or equivalent in engineering, science or a related field, and 2+ years in a lab with optical test or fibre equipment. Fibre cleaving and splicing, high-precision optical measurement, and attention to detail are essential.

  Optical test equipment, Python

• 14j

  Senior Network Development Engineer

  Toronto, ON

  Hybride

  

  NetBrain

  5+ ansCandidates need a bachelor's degree in a technical field, 5-8 years of software development experience including automation frameworks, and strong Python skills with pytest, unittest or Robot Framework. They also need working networking knowledge (OSPF, BGP, VLAN, ARP), CI/CD and Git experience, and fluent English.

  Python, pytest, Robot Framework, Jenkins, GitLab CI, GitHub Actions

• 14j

  Journeyman Machinist

  Edmonton, AB

  Temps plein

  

  Stream-Flo: manufactures wellheads, gate valves, check valves, and surface safety valves for the worldwide energy industry.

  10+ ansCandidates need at least 10 years of conventional lathe experience and an Alberta journeyman machinist certification or equivalent Red Seal. Some milling, large-part turning and crane or forklift experience are preferred.

  Lathe, Milling machine, Forklift, ERP system

• 15j

  Journeyperson Electrician

  Edmonton, AB

  

  Waiward Industrial LP: For over 50 years, Waiward is one of Canada’s largest steel fabricators and erector’s and a leading provider of modular assembly, construction, and…

  Candidates need a journeyperson credential or Alberta certification, plus Elevated Work Platform and Fall Protection certifications. Rigging, overhead crane, and FLHA training are assets, and candidates must pass respirator testing and lift up to 50 pounds.

  test and measuring equipment, power tools, overhead crane, elevated work platform

• 15j

  Field Technician- Electrical/Mechanical

  Greater Sudbury, ON

  Temps plein

  

  Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…

  3+ ansCandidates need 3 to 5 years in a similar role, a Red Seal Electrician Certificate or Electrical Engineering Technologist credential, and 3+ years of field service repair experience in electrical distribution. Hands-on electro-mechanical skill and the ability to read drawings and manuals are required.

  rigging equipment, vibration analysis equipment, welding equipment, PLC, test equipment

• 15j

  Casual Physiotherapy Assistant

  Ontario

  31,31–34,36 $/hTemps partiel, À la journée

  

  Riverside Health Care

  Candidates need a recognized physiotherapy assistant diploma or comparable health care credential, prior direct client work in a health care facility, and current CPR certification. Strong written and verbal communication, gerontology knowledge and Word, Excel and PowerPoint skills are also required.

  Electrotherapy equipment, Orthopaedic braces, Prostheses, Canes, Crutches, Walkers

• 15j

  Webber - Road Technician - Infrastructure Management

  Kingston, ON

  25–27 $/hTemps plein

  TW

  TI2 WEBBER INFRASTRUCTURE MANAGEMENT CANADA

  1+ ansCandidates need a high school diploma or GED and a valid driver's licence with a good driving record. One year of infrastructure maintenance experience is preferred, and CDL, DOT, electrical or welding certifications are a strong asset.

  bucket truck, aerial lift, pickup truck, large truck, snow removal equipment, sanding equipment

• 15j

  Maintenance Technician- ChamClad

  Edmonton, AB

  WS

  Wausau Supply Co

  3+ ansCandidates need a diploma in electro-mechanical technology or industrial maintenance, or at least three years of industrial maintenance experience. Hands-on electromechanical skills, PLC and drive troubleshooting, and the ability to read schematics are needed, and a Red Seal or Alberta trade certification is an asset.

  CMMS, PLC, test equipment, hand tools, power tools, measuring devices

• 15j

  Onsite Field Services Technician, Sudbury - Polycom

  Ontario

  Temps plein

  CC

  CSC Canada

  2+ ansCandidates need 2 to 5 years of IT technical support experience, including Windows 10 or 11 and Office 365 in an enterprise setting, plus a high school diploma. Strong troubleshooting, communication and organization skills are needed, and Polycom or networking experience is an asset.

  Polycom, Office 365, SAP, Cisco Call Manager, Microsoft Intune, Android TV boxes

• 15j

  Patient Care Retail Sales Specialist (PSW) - Ottawa

  Ottawa, ON

  22–24 $/h

  

  OMS / Royal Drugs

  Ontario Medical Supply requires post-secondary PSW education and clinical experience in patient care or mobility support. Candidates need strong communication skills, comfort standing for long periods, and light equipment handling; bilingualism, fitting experience and POS skills are assets.

  POS system

• 15j

  Machine Operator (Day Shift)

  Crossfield, AB

  26,50 $/hSur placeTemps plein

  

  Carlisle: Carlisle Construction Materials (CCM) is a diversified manufacturer and supplier of premium building products for the commercial and residential…

  Candidates need a high school diploma or GED (preferred), to be at least 18, and a strong work ethic with attention to detail. Prior manufacturing experience is preferred, along with basic math, computer and measuring skills.

  calculator, measuring devices, hand tools, computer

• 15j

  Resident Advisor

  Kelowna, BC

  

  Campus Living Centres

  Candidates need to be full-time students at the institution, maintain at least a 65% GPA, and have superior verbal communication and customer service skills. Standard First Aid, CPR Level C, and a valid criminal record check are required before the contract begins.

  Reporting, Confidentiality, Relationship building, Leadership, Emergency response, WHMIS

  15j

  Resident Advisor

  Penticton, BC

  

  Campus Living Centres

  Candidates need to be full-time students at the institution, maintain at least a 65% GPA, and have superior verbal communication and customer service skills. Standard First Aid, CPR Level C, and a valid criminal record check are required before the contract begins.

  Reporting, Confidentiality, Relationship building, Leadership, Emergency response, WHMIS

  15j

  Housing & leasing Coordinator

  Waterloo, ON

  

  Campus Living Centres

  2+ ansCandidates need at least two years of industry or administrative experience, a recognized college diploma or university degree, strong written and verbal communication, leadership and decision-making skills, and knowledge of the Residential Tenancy Act and lease negotiation.

  Office administration, Housekeeping, Communication skills, Leadership, Accounts receivable, Reporting

  15j

  Maintenance Services Representative

  Burnaby, BC

  

  Campus Living Centres

  1+ ansCandidates need at least 1 year of industry experience, a high school diploma (a college diploma is preferred), and knowledge of commercial electrical, plumbing and HVAC systems. They must be physically fit, handle several projects at once, and complete WHMIS 2015, GHS and OHSA safety training.

  Ladders, Hand tools, Fire extinguishers, Standpipes and fire panel, Utility meters

  15j

  Resident Advisor

  Brampton, ON

  

  Campus Living Centres

  Candidates need to be full-time students at the institution, maintain a 65% GPA, and have superior verbal communication and customer service skills. Standard First Aid and CPR Level C are required, and a valid criminal record check is needed.

  Reporting, Confidentiality, Relationship building, Leadership, Emergency response, WHMIS

  15j

  Residence Services Representative

  Ottawa, ON

  

  Campus Living Centres

  1+ ansCandidates need at least one year of industry or customer service experience, excellent verbal communication and customer service skills, and a positive attitude. They must work independently, juggle several tasks at once, and complete WHMIS and other training before starting.

  Campus Living Centres computer software, Video surveillance system, Key card system

  15j

  Residence Services Representative

  Niagara-on-the-Lake, ON

  

  Campus Living Centres

  1+ ansCandidates need at least one year of industry or customer service experience, excellent verbal communication and customer service skills, and a positive attitude. They must work independently, juggle several tasks at once, and complete WHMIS and other training before starting.

  Campus Living Centres computer software, Video surveillance system, Key card system

  15j

  Resident Advisor

  Barrie, ON

  

  Campus Living Centres

  Candidates need to be full-time students at the institution, maintain at least a 65% GPA, and have superior verbal communication and customer service skills. Standard First Aid, CPR Level C, and a valid criminal record check are required before the contract begins.

  Reporting, Confidentiality, Relationship building, Leadership, Emergency response, WHMIS

12 entreprises