Emplois “Test bench” au Canada – Page 5

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 10j

  DSP Systems Engineer, Staff

  Toronto, ON

  Sur place

  

  Qualcomm Canada ULC

  4+ ansCandidates need a Bachelor's in engineering or a related field with 4+ years of systems engineering experience, or a Master's with 3+ years, or a PhD with 2+ years. Strong MATLAB, Python and C/C++ skills, plus DSP architecture experience in mixed-signal SerDes, are required.

  MATLAB, Python, C/C++, RTL simulation tools

  10j

  Sr ASIC Design Verification Engineer, Low Power AI

  Markham, ON

  Sur place

  

  Qualcomm Canada ULC

  2+ ansQualcomm Canada ULC needs candidates with a bachelor's, master's or PhD and 2 to 4+ years of ASIC work, depending on degree. Expert skill in Verilog, SystemVerilog, UVM and C, plus a deep understanding of ASIC/VLSI concepts, is required.

  SystemVerilog, UVM, Verilog, VHDL, SystemC, Perl

  10j

  Staff Verification Engineer, Compute Subsystems

  Markham, ON

  Sur place

  

  Qualcomm Canada ULC

  5+ ansCandidates need a bachelor's, master's, or PhD in engineering or science with several years of ASIC design or verification experience, plus strong UVM and SystemVerilog skills, bus protocol knowledge, and scripting in Perl or Python.

  UVM, Perl, Python, C

• 10j

  PST Validation Engineer

  Markham, ON

  Sur place

  QT

  Qualcomm Technologies, Inc.

  2+ ansCandidates need a bachelor's degree in science or engineering and 2+ years of ASIC design, verification or validation work, or a master's with 1+ year. They need knowledge of mobile chip architecture, regression and PVT testing, and C and Python programming.

  Lauterbach Trace32, JTAG, Python, C

• 11j

  Engineering Co-Op Student (Project)

  Saskatoon, SK

  SR

  Saskatchewan Research Council: SRC is a market-driven company that sells services and products to companies in Saskatchewan and around the world.

  Candidates need to be a third or fourth year chemical, electrical or mechanical engineering student in the University of Saskatchewan co-op program. They need strong attention to detail, safety awareness, teamwork and the ability to work with minimal supervision.

  Research, Supply chain management, Communication skills, Inspection, Supervise equipment, Mechanical engineering

• 11j

  Con-Test - Technician - EDM

  Edmonton, AB

  

  BGE Indoor Air Quality Solutions Ltd.: Western Canada's leading provider of indoor air quality and filtration solutions.

  Candidates need mechanical aptitude with hand tools and a Class 5 driver's licence with a clean 3-year abstract. Working knowledge of HVAC, electrical or motor repair, basic airflow and pressure calculations, and standards such as NSF/ANSI and ISO are assets.

  hand tools

  12j

  Field Service Technician (Controlled Environments)

  Vancouver, BC +1

  

  BGE Indoor Air Quality Solutions Ltd.: Western Canada's leading provider of indoor air quality and filtration solutions.

  Candidates need mechanical aptitude with hand tools, basic calculation skills for airflow and pressure, and a Class 5 driver's licence with a clean three-year driver's abstract. They must also pass pre-employment and pre-access drug, cannabis and alcohol tests.

  Hand tools

• 11j

  Senior Mixed Signal Design Engineer

  Toronto, ON

  Temps plein

  NC

  NVIDIA Canada Dev. Inc.

  5+ ansCandidates need a master's degree in electrical or computer engineering or equivalent experience, at least 5 years of industry analog design, and deep-submicron (especially FinFET) CMOS design skills. Experience with Cadence, Spectre or HSpice simulation and testbench development is also required.

  Cadence Virtuoso, Spectre, HSpice, Finesim, XA

• 11j

  Structural Assembler II

  Mississauga, ON

  MH

  Mitsubishi Heavy Industries, Ltd.

  2+ ansCandidates need 2 to 4 years of aircraft assembly experience, skill with hand and power tools, and the ability to read 2D and 3D technical drawings. They must also work rotating shifts, stand for long periods, and pass a respirator fit test.

  Pneumatic tools, Power tools, Hand tools, Jigs, Fixtures

• 11j

  Electrical Engineer / Senior Electrical Engineer

  Collingwood, ON

  Sur placeTemps plein

  

  Impossible Metals

  Candidates need a bachelor's degree in electrical, mechatronics, or a related engineering field, plus professional experience designing electrical systems for robotics or complex electromechanical products. Strong skills in analog, digital, and power electronics, hands-on testing, and schematic and documentation work are required.

  test equipment, PCB design software

• 11j

  Engineering Student - FPGA Verification - Winter 2027

  Sainte-Anne-de-Bellevue, QC

  Temps plein

  

  MDA

  Candidates need completion of a third year of an electrical or computer engineering bachelor's degree with a 3.2/4.0 minimum GPA. They need a desire to learn, initiative, and a collaborative attitude, plus security clearance eligibility.

  SystemVerilog, VHDL, Verilog, Tcl, Python, C/C++

• 11j

  Electronic Technician

  Montréal, QC

  Sur placeTemps plein

  

  Octasic Inc.: is a global provider of media and wireless baseband processing silicon and software solutions for the converged carrier, enterprise and end-point…

  10+ ansCandidates need a DEC in electronics or equivalent and at least 10 years of similar experience, ideally in high-tech manufacturing. Soldering skill, Windows scripting and fluent French and English are required, with RF testing knowledge an asset.

  Test stations, RF testing equipment, Windows, Soldering equipment

  11j

  Electronic Technician

  Montréal, QC

  Sur placeTemps plein

  

  Octasic Inc.: is a global provider of media and wireless baseband processing silicon and software solutions for the converged carrier, enterprise and end-point…

  10+ ansCandidates need a DEC in electronics or equivalent and at least 10 years of similar experience, ideally in high-tech manufacturing. Soldering skill, Windows scripting and fluent French and English are required, with RF testing knowledge an asset.

  Test stations, RF testing equipment, Windows, Soldering equipment

• 11j

  Temporary Research Technologist

  Mississauga, ON

  65k–70k $/an

  

  HF Sinclair: Headquartered in Dallas, Texas, HF Sinclair Corporation is an independent, diversified energy company committed to safely producing products that…

  Candidates need a chemistry or chemical engineering technology diploma or degree, plus lab experience with petroleum or chemical products and ASTM test methods. Strong computer, communication and teamwork skills are also needed.

  Excel, pilot blending plant

• 11j

  Senior GRC Analyst

  Ottawa, ON +1

  116k–146k $/anHybrideTemps plein

  

  Quantexa

  8+ ansCandidates need 8+ years in information security governance, risk and compliance, experience with government security requirements and personnel screening, and working knowledge of ISO 27001, SOC 2 and NIST SP 800-53. A Secret clearance or the ability to obtain one is required.

  Data analysis, Security regulations, CSM, Security in commercial buildings, Regulatory compliance, Procurement

• 12j

  Electrical Engineer (Contractor)

  Calgary, AB

  HybrideContrat

  TD

  Tangent Design Engineering: Is a Calgary, Alberta based engineering firm that has been in business for 16 years helping companies create and optimize new technologies and…

  Candidates need established independent contractor or consultant status, plus strong electrical design experience for physical products. They should show hands-on schematic capture, PCB layout, embedded hardware and real-world troubleshooting, with shipped or validated product examples.

  Electrical engineering, Printed circuit boards, Documentation, Debugging, Problem solving, Regulatory compliance

• 12j

  Support Specialist (Talent Community / Future Openings)

  Télétravail au Canada

  Télétravail

  

  Velora

  1+ ansVelora needs candidates with 1-3+ years of SaaS or customer-facing support experience and clear, empathetic written and verbal communication. Candidates should troubleshoot well, use support tools like Zendesk or Intercom, and use AI practically while checking its output.

  Zendesk, Intercom, HubSpot Service

• 12j

  Calibration & Maintenance Technician

  Ottawa, ON

  20–30 $/h

  

  Gastops Limited

  Candidates need hands-on experience with multimeters, oscilloscopes, function generators, power supplies and hand and power tools. Basic Microsoft Office skills, the ability to follow approved test work instructions, strong attention to detail, and the ability to work independently and with a team are also required.

  Multimeter, Oscilloscope, Function generator, Torque wrench, Screwdrivers, Allen keys

• 12j

  District Manager - AB South

  Alberta

  Temps plein

  PV

  Pet Valu Canada Inc. (Company)

  2+ ans2+ gestionCandidates need a college diploma, preferably in business, retail or marketing, and at least 2 to 3 years managing 10+ stores in a retail chain. They need strong visual merchandising skills, Word and Excel proficiency, time management skills and the ability to travel.

  Excel, Word, POS, ADT reports

• 12j

  Analyst I (Microbiology) - Eurofins Cosmetics & Personal Care, Inc.

  Toronto, ON

  49k $/anSur placeTemps plein

  

  Eurofins

  1+ ansEurofins needs candidates with 1-3 years in microbiology, a solid microbiology background, and a B.Sc. or diploma in a related field. Strong attention to detail, clear lab reports, English fluency and basic Microsoft Excel skills are also required.

  Microsoft Excel, Laboratory instruments and equipment

• 12j

  AME Material Flow & Intralogistics SME

  Nisku, AB

  Temps plein

  

  Johnson Controls Inc.

  10+ ansCandidates need a bachelor's degree in an engineering field and 10+ years of material-flow or manufacturing systems experience. They must have hands-on experience with AGV/AMR systems, conveyors and plant layouts, and a track record of working directly on the plant floor.

  AGV, AMR, Conveyor systems, Warehouse management system, MES, Digital twin simulation tools

• 12j

  Engineering Lab Coordinator - Onsite

  Ottawa, ON

  Temps plein

  DD

  D4S DY-4 Systems Inc.

  2+ ansCandidates need a diploma in electronics engineering technology or a related technical field plus about 2 years of industry experience, the ability to read engineering drawings, and skill with basic lab test equipment such as oscilloscopes.

  Oscilloscope, SAP, MES, Environmental chamber, Test bench

• 13j

  Sustaining Engineer – R&D

  Kitchener, ON

  65k–80k $/anSur placeTemps plein

  NT

  NERv Technology Inc. D.B.A. FluidAI Medical

  1+ ansCandidates need 1 to 3 years of engineering experience, ideally in medical devices or another regulated industry, and an engineering degree. They also need basic knowledge of manufacturing and quality systems, strong technical writing, problem-solving skills, and comfort working with data on the production floor.

  Excel, Python

• 13j

  Engineering - Automotive HVAC Product Engineer

  Saskatoon, SK

  CC

  Crestline Coach Lted.

  5+ ansCandidates need a bachelor's degree in Mechanical Engineering or a related discipline and about five years of HVAC engineering experience. Strong knowledge of thermodynamics, heat transfer and fluid dynamics, plus CFD, CAD and testing experience, is required.

  Autodesk Inventor, Autodesk Vault, SimScale, Microsoft Office

20 entreprises