Emplois “Maximo Health” au Canada – Page 6

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Building Operator II (Office)

  Calgary, AB

  Temps plein

  

  Cadillac Fairview: Driven by its purpose of Transforming Communities for a Vibrant Tomorrow, CF is continually striving to make a positive impact in communities where…

  4+ ansCandidates need at least 4 years of physical plant or HVAC experience, a 4th Class Power Engineer licence and a high school diploma. Strong mechanical skills, good communication and the ability to work overtime and handle emergencies are also needed.

  Maximo

• 1 mois

  Senior Engineer, Planning

  Leduc, AB

  Temps plein

  

  Apex Utilities Inc.: Commencing operations in 1954, with its Head Office located in Leduc, Alberta, AUI operates its gas distribution systems with over 21,000 km of…

  7+ ansCandidates need a mechanical or related engineering degree, a P.Eng. designation with APEGA, a Class 5 driver's licence and 7-10 years of gas utility or pipeline experience. Hydraulic modelling, capital planning and strong communication skills are key.

  Synergi Gas, Maximo, Abadata, GIS/ESRI, CAD, Microsoft Office

• 1 mois

  Control Room Operator

  Grande Prairie, AB

  

  Paramount Resources Ltd.: is an independent, intermediate Canadian energy company.

  6+ ansCandidates need at least six years of gas plant operations, including three years on a DCS console in a large sour processing facility. Experience with amine sweetening, glycol dehydration, compression and acid gas injection, plus DeltaV or similar DCS and SCADA platforms, is required.

  DeltaV, SCADA, HMI, Maximo, Microsoft Office

• 1 mois

  Process and Process Safety Management Lead

  Come By Chance, NL

  

  Braya Renewable Fuels: Braya Renewable Fuels owns and operates the Come By Chance Refinery, located in Newfoundland and Labrador, and has converted it to renewable fuel…

  8+ ansBraya Renewable Fuels needs a candidate with a Bachelor's in Process or Chemical Engineering, a P.Eng. designation and 8-10 years of process engineering and process safety experience. Refinery or hydrotreating experience, leadership experience, a strong safety record and the ability to pass a pre-employment medical are required or preferred.

  Maximo, SAP, Microsoft Office

  1 mois

  Electrical Engineering Lead

  Come By Chance, NL

  

  Braya Renewable Fuels: Braya Renewable Fuels owns and operates the Come By Chance Refinery, located in Newfoundland and Labrador, and has converted it to renewable fuel…

  5+ ansCandidates need an electrical engineering degree, a P.Eng. designation or eligibility with PEGNL, and at least 5 years of industrial experience. Strong safety record, leadership, communication and scheduling skills are essential.

  Maximo, SAP, SKM, P6, Microsoft Office

  1 mois

  Operations Shift Supervisor / Power Engineer (2nd or 3rd Class)

  Come By Chance, NL

  

  Braya Renewable Fuels: Braya Renewable Fuels owns and operates the Come By Chance Refinery, located in Newfoundland and Labrador, and has converted it to renewable fuel…

  5+ ansBraya Renewable Fuels needs candidates with an engineering technology diploma or power engineering certificate (2nd class, or 3rd class with a commitment to reach 2nd class), at least 5 years of industry experience, strong leadership and communication skills, and an exemplary health, safety and environment record.

  Maximo, SAP, Microsoft Office

• 1 mois

  Mechanical Project Coordinator

  Hamilton, ON

  60k–68k $/anSur placeTemps plein

  

  American Iron and Metal: American Iron & Metal (AIM) is a family-owned, Canada-based company founded in 1936.

  1+ ansCandidates need a diploma or bachelor's degree in mechanical engineering, mechanical engineering technology, industrial engineering or a related field, plus 1 to 3 years of mechanical, industrial, manufacturing, construction or maintenance project experience. Co-op or internship experience is considered, and a valid Class G licence is required.

  Microsoft Project, AutoCAD, IBM Maximo, Microsoft Office Suite

• 1 mois

  Maintenance Planner (Administrator)

  Edmonton, AB

  28 $/hSur placeTemps plein

  

  Dexterra

  Candidates need a high school diploma, strong computer skills in Outlook, Excel, Word and Teams, and attention to detail. Experience with work order systems such as SAP, Maximo or CMMS is a strong asset, and a valid unrestricted driver's licence is required.

  SAP, SAP Fiori, PROMPT, CMMS, Maximo, Microsoft Outlook

• 1 mois

  Electrical Engineer - Airport

  Mississauga, ON

  90k–140k $/anSur placeTemps plein

  

  AECOM: AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025.

  4+ ansCandidates need an electrical engineering degree, ideally with aviation or commercial electrical experience, and at least 4 years in electrical design, construction and commissioning. Knowledge of airfield lighting, distribution systems and aviation regulations is preferred.

  AutoCAD, Revit, Bluebeam, Maximo, ProjectWise, MicroStation

• 1 mois

  Engineering Change Control (ECC) Specialist

  Pickering, ON

  HybrideTemps plein

  

  Alithya

  5+ ansCandidates need a bachelor's degree in engineering or computer science, at least 5 years in engineering change control using Maximo, and working knowledge of BP-PROC-01081 and related procedures. Strong English communication and the ability to work with limited oversight are required.

  Maximo

• 1 mois

  Maintenance Planners

  Kirkland, QC

  Temps plein

  

  Laurentide Controls Ltd.

  3+ ansCandidates need a bachelor's or a relevant DEC, DEP or equivalent, plus 3 to 5 years in a similar role. Strong organization, autonomy, communication and leadership skills are needed, along with MS Office proficiency; experience with a CMMS such as Maximo, SAP or Guide Ti is a major asset.

  CMMS, Maximo, SAP, Guide Ti, MS Project, Excel

• 1 mois

  Technicien de maintenance des systèmes de sécurité / Security Systems Maintenance Technician

  Laval, QC

  58k–62k $/anSur placeTemps plein

  

  ADGA Group Consultants Inc: ADGA Group is a Canadian-owned defence and security company delivering advanced technology solutions to government and industry.

  Candidates need a DEP or college technologist diploma, or an equivalent mix of education and experience. They need knowledge of RF, CATV, CCTV, PA/intercom and automated control systems, plus communications equipment and MS Office. French is essential, and eligibility for federal Enhanced Reliability clearance is required.

  Maximo, MS Office, CCTV systems, CATV equipment, PA/intercom systems

• 1 mois

  Medium Voltage Switchgear Relay/Protection & Control Specialist

  Grande Prairie, AB

  TélétravailTemps plein

  

  Versys Electrical: Versys Electrical, Instrumentation and Mechanical provides exceptional industrial commissioning, start up and construction services.

  3+ ansCandidates need an associate's degree, trade certification or BSEE, plus 3 to 7 or more years of hands-on protection and control experience, and 10 or more years of commissioning experience is listed. Versys Electrical also requires relay test equipment skills, a valid driver's licence, a drug and alcohol test, and US work eligibility.

  OMICRON CMC, Doble, Megger, SEL relays, SAP PM, Maximo

• 1 mois

  Electrical Engineer - Airfield Ground Lighting

  York, ON +1

  90k–120k $/anTemps plein

  AC

  AtkinsRéalis Canada Inc.

  6+ ansCandidates need an electrical engineering degree, a P.Eng. registration with PEO or eligibility for it, and about 6 years of industrial or commercial electrical design and construction experience on major projects. Thorough knowledge of airfield ground lighting, aviation regulations and engineering software is required.

  Maximo, ProjectWise, Oracle Enterprise Resource Planning, Bluebeam, Revit, AutoCAD

• 1 mois

  DRMIS Data Coordinator

  Halifax, NS

  HybrideTemps plein

  TC

  Thales Canada Inc., Defence and Security

  3+ ansCandidates need at least 3 years in data coordination, management or governance, a diploma in a related field, and advanced Microsoft Office skills. Experience in an engineering or defence environment and with SAP, DRMIS or IBM Maximo is preferred, and eligibility for controlled-goods access is required.

  SAP, IBM Maximo, DRMIS, SharePoint, SFTP, Microsoft Office

• 1 mois

  Fork Lift Technician

  Bolton, ON

  Temps plein

  

  Canadian Tire Corporation, Limited: In addition, CTC owns and operates Helly Hansen, a leading technical outdoor brand based in Oslo, Norway.

  Canadian Tire Corporation, Limited needs candidates with an Ontario Certificate of Qualification as a Powered Lift Truck Technician (282E) or Automotive Service Technician (310S) and industrial mobile equipment experience. Candidates must read schematics, work at heights up to about 45 feet, handle frequent moderate to heavy lifting, and work nights.

  MAXIMO, AGV, diagnostic tools, hydraulic tools

• 1 mois

  IBM Maximo (MAS ) Technical Specialist

  Calgary, AB +4

  Temps plein

  AI

  Accenture Inc Company

  Candidates need hands-on MAS and OpenShift administration experience, scripting skills in Ansible, Terraform, YAML, JSON and XML, and a bachelor's degree or college program in computer science or a related field. Fluent English is required.

  IBM Maximo Application Suite, Red Hat OpenShift, MAS CLI, Ansible, Terraform

• 1 mois

  Maintenance A1

  Brampton, ON

  37,24 $/hTemps plein

  II

  IKO Industries Ltd.

  3+ ansCandidates need an Ontario Industrial Mechanic licence (433A, Red Seal), at least 3 years of manufacturing maintenance experience, and the ability to read mechanical drawings and work with welding and cutting. They must also be able to lift 50 pounds, work at heights and in confined spaces, and work shifts, extended hours and weekends.

  Maximo, Metric tools, Calipers, Micrometers, Hoists, Cranes

  1 mois

  Corporate Reliability Engineering Co-Op

  Brampton, ON

  22–25 $/hTemps plein

  II

  IKO Industries Ltd.

  Candidates need strong Excel skills (pivot tables, lookup tables, charts), proficiency in AutoCAD, Word and PowerPoint, and fluent English. Troubleshooting ability is an asset, and the employer wants a self-starter.

  Excel, AutoCAD, Maximo, Prodac, Word

  1 mois

  Millwright

  Brampton, ON

  44,72 $/hTemps plein

  II

  IKO Industries Ltd.

  3+ ansCandidates need a valid Ontario Industrial Mechanic licence (433A, Red Seal), at least 3 years in a manufacturing environment, and a full set of metric tools. Experience with mechanical devices, pneumatics and welding, and the ability to read mechanical drawings, are required.

  Maximo, hoists, cranes, micrometers, calipers, levels

  1 mois

  Millwright

  Madoc, ON

  44,12 $/h

  II

  IKO Industries Ltd.

  3+ ansCandidates need a valid Ontario Industrial Mechanic licence (433A, Red Seal), 3 to 5 years of manufacturing experience, and the ability to read mechanical drawings. They must bring a full set of metric tools, work shifts and weekends, lift up to 50 pounds, and work at heights and in confined spaces.

  Micrometers, Calipers, Hoists, Cranes, Welding equipment, Maximo

• 1 mois

  Millwright - C of Q

  Brampton, ON

  42,07 $/hTemps plein

  IM

  IG Machine & Fibers Ltd.

  5+ ansCandidates need at least five years of maintenance experience in manufacturing, a valid Ontario Industrial Mechanic licence (Red Seal C of Q), and knowledge of lockout procedures. Welding and machining experience, computer-based maintenance software skills and their own hand tools are also needed.

  Maximo, Hand tools, Power tools, Machine shop equipment

• 1 mois

  Millwright

  Hawkesbury, ON

  44,21 $/h

  I

  IKO

  5+ ansCandidates need a valid Ontario Millwright Mechanic License and exposure to mechanical devices, pneumatic controls and welding. IKO prefers 5-8 years of manufacturing experience and the ability to read mechanical drawings.

  Maximo, Hoists, Cranes, Calipers, Micrometers, Welding equipment

• 1 mois

  Millwright

  Brampton, ON

  43 $/hTemps plein

  CC

  Canroof Corporation Inc.

  3+ ansCandidates need a Red Seal Ontario Industrial Mechanic licence (433A), at least 3 years in manufacturing, and experience with mechanical devices, pneumatics and welding or cutting. They must read mechanical drawings, work shifts and extended hours, and lift up to 50 pounds.

  Maximo, Metric tools, Calipers, Micrometers, Hoists, Cranes

19 entreprises