Emplois “CNC controls” au Canada – Page 8

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 12j

  Machiniste CNC Sorel-Tracy

  Saint-Joseph-de-Sorel, QC

  28–37 $/hTemps plein

  

  Randstad Canada

  DEP en technique d'usinage avec ASP en contrôle numérique, DEC en génie mécanique ou AEC; 0 à 5 ans d'expérience; Expérience pratique sur tour CNC et centre d'usinage

  Mazatrol, Heidenhain

  12j

  CNC Machinist

  Edmonton, AB

  25 $/hContrat

  

  Randstad Canada

  Candidates need hands-on experience setting up or running CNC machinery in a shop, practical use of measuring tools like calipers, micrometers and gauges, and a strong eye for quality control. They must be able to work onsite in Nisku, AB.

  CNC machinery, calipers, micrometers, gauges

  12j

  Industrial Millwright

  Barrie, ON

  45 $/hTemps plein

  

  Randstad Canada

  5+ ansCandidates need a 433A millwright qualification and at least five years of experience as a qualified millwright. Strong troubleshooting, teamwork, and welding and machining fabrication experience are required, with 5S and continuous improvement experience highly desired.

  Stamping press, Welding equipment

  12j

  Machiniste CNC de nuit Saint-Jean-Sur-Richelieu

  Saint-Jean-sur-Richelieu, QC

  33,81–36,48 $/hContrat

  

  Randstad Canada

  DEP en usinage ou technique de génie mécanique, ou équivalent avec expérience; Expérience acceptée dès le niveau junior; Solide capacité à lire les plans et prendre des mesures précises

  Fanuc, Shimada, Kitako, Auto4, interfaces HMI, outils de mesure

  13j

  Advanced 5-axis CNC Mill Machinist

  Oakville, ON

  48–58 $/hTemps plein

  

  Randstad Canada

  Randstad Canada needs a senior CNC machinist with proven experience in high-mix, low-volume work, advanced 5-axis milling on Fanuc controls, blueprint reading, and machining titanium, Inconel and stainless steel.

  5-axis CNC mill, Matsuura, Nakama, GF, Fanuc control

  13j

  Journeyman Electrician

  Airdrie, AB

  40–55 $/hTemps plein

  

  Randstad Canada

  Candidates need a Red Seal or journeyperson electrician or millwright credential, or technical college training, plus schematic-reading and mechanical diagnostic skills. A valid driver's licence, clean record and valid passport are also required.

  Microsoft Outlook, Microsoft Excel, Microsoft Word, Windows, PLC, CNC machinery

  13j

  CNC Machinist

  Uxbridge, ON

  35–42 $/hTemps plein

  

  Randstad Canada

  Candidates need proven experience running multi-axis lathes or 4-axis and 5-axis machining centers, working with Fanuc and Heidenhain controls, and reading blueprints. Reliable daily transportation to Uxbridge is required.

  Fanuc control, Heidenhain control, 4-axis VMC, 5-axis VMC, 9-axis lathe

  13j

  Afternoon Shift Machinist

  Beamsville, ON

  30–42 $/hTemps plein

  

  Randstad Canada

  Candidates need machinist experience in custom manufacturing, hands-on skill with HAAS CNC and manual machines, and the ability to read AutoCAD files. Practical use of SolidWorks, BobCAM or conversational programming is also required.

  HAAS CNC lathe, CNC mill, Manual mill, Manual lathe, Sinker EDM, SolidWorks

  13j

  Machiniste conventionel

  Saint-Bruno-de-Montarville, QC

  30–38 $/hTemps plein

  

  Randstad Canada

  7+ ans7 à 10 ans d'expérience en usinage conventionnel; Maîtrise du tour manuel, de la fraiseuse et des outils d'atelier; Compétences en soudage (un atout)

  Tour manuel, Fraiseuse manuelle, Perceuse à colonne, Rectifieuse, Micromètres, Pieds à coulisse

• 12j

  Electro-Mechanical Technologist

  Ottawa, ON

  

  National Research Council Canada

  2+ ansCandidates need a two to three year technology diploma in electrical, electronics or mechanical fields, plus two to six years of hands-on troubleshooting and repair of machine shop equipment. A Secret clearance and the ability to lift heavy objects and work in confined, noisy or dusty spaces are also required.

  Manual machine tools, Ball bar, Precision levels, PLC, Coolant systems, Pumps

• 12j

  CNC Operator-Metal Machining

  Edmonton, AB

  25–30 $/hContrat, Temporaire

  

  adecco

  1+ ansCandidates need at least one year of CNC metal machining experience and be legally eligible to work in Canada. A high school diploma is preferred, and a CNC Machinist or Operator certificate is an asset.

  CNC machines, Overhead crane, Pallet jack, Measuring tools, Gauges

  12j

  CNC Rework Machinist

  Edmonton, AB

  39–42 $/h

  

  adecco

  Adecco needs an experienced machinist with strong CNC lathe skills, the ability to read blueprints, and experience with threaded connections and precision measuring tools. Familiarity with ISO 9001 documentation and Weiler lathes or Siemens controls is an asset.

  CNC lathe, Weiler lathe, Siemens control, micrometers, calipers, thread gauges

• 12j

  Messer Table Operator - Local 1, Marine Fabricators (Day Shift)

  Dartmouth, NS

  Temps plein

  

  JDI

  JDI wants candidates with college, CEGEP or technical training and a general knowledge of CNC programming and cutting. Candidates need to be eligible to work in Canada, pass a pre-employment physical and meet Controlled Goods, security clearance and ITAR requirements.

  Messer Table, CNC cutting equipment, Personal protective equipment

• 12j

  Régleur-opérateur généraliste/régleuse-opératrice généraliste de machine-outil

  Saint-Éphrem-de-Beauce, QC

  25–30 $/hTemps plein

  CH

  CLERMOND HAMEL LTEE

  ASP en usinage sur machines-outils CNC ou DEP en techniques d'usinage; Fiable, ponctuel et autonome; Rigueur, précision et minutie

  CNC machine

• 12j

  Machiniste cnc

  Trois-Rivières, QC

  40–50 $/hTemps plein

  TI

  Techmec Industriel

  5+ ansDEP ou ASP en usinage CNC, ou formation équivalente; Minimum 5 ans d'expérience comme machiniste CNC; Maîtrise des codes G et M (atout important)

  Vernier, Micromètre, Alésomètre, Comparateur, Centre d'usinage CNC, Tour CNC

• 13j

  Finance Clerk - 35 Hours

  Prince George, BC

  Temps plein

  SD

  School District 57

  5+ ansCandidates need five years of accounting experience in a large organization and one year of payroll experience. A Grade 12 diploma plus accounting training and the first two Payroll Compliance Practitioners courses are required, along with 50 words per minute keyboarding.

  Computer accounting software, Spreadsheet applications, Photocopier, Facsimile machine, Cheque writer, Calculator

• 13j

  Machinist

  Saskatoon, SK

  Temps plein

  OR

  OMNI RAPID PROTOTYPING

  Candidates need proven machinist or CNC operator experience in manufacturing, strong mechanical and blueprint-reading skills, and CNC programming ability with Fanuc or similar controls. Siemens and Fusion 360 or CAD experience are assets.

  CNC mill, CNC lathe, SolidWorks, Fusion 360, Fanuc control, Siemens control

• 13j

  Millwright (Licensed)

  Concord, ON

  Temps plein

  

  Magna Exteriors Inc.

  Candidates need a Certificate of Qualification as an Industrial Millwright (#433A) and a licence to work on high reach equipment, plus prior mechanical experience in automotive or CNC machine shops. Strong problem solving, independent work and communication skills are also needed.

  Crane, High reach equipment, Manual saws, Lathes, Milling and drilling machines, Tycos Maintenance Database

• 13j

  Packager

  Burlington, ON

  Sur placeTemps plein

  

  Rhyno Equity Group

  Candidates need experience in packaging or a willingness to learn, strong attention to detail, the ability to read English packing lists and labels, basic math skills, reliable attendance and the ability to follow safety procedures.

  Stretch wrap, Cardboard, Corner guards, Foam, Blankets, Tracking system

• 13j

  BIM Specialist

  Canada

  Temps plein

  

  Mattamy Homes: In the United States, the company is represented in 11 markets – Charlotte, Raleigh, Dallas, Phoenix, Tucson, Jacksonville, Orlando (where its US…

  2+ ansCandidates need post-secondary education in architectural technology, structural or construction engineering, or a related field, plus 2 to 4 years of Revit modelling experience. Panelization software such as SEMA, BIM standards knowledge and strong multi-discipline coordination skills are also required.

  Revit, SEMA, Dynamo

• 13j

  Opérateur centre d'usinage cnc

  Mirabel, QC

  Temps plein, À la journée

  CB

  Cuisine BMD

  Expérience en opération de centres d'usinage CNC; Lecture des bons de travail; Précision et minutie

  Centre d'usinage CNC

• 13j

  Drilling Machine Operator (Segment 2; Aerospace)

  Stratford, ON

  34,50 $/h

  S

  Schaeffler: With innovative technologies, products, and services for electric mobility, CO₂-efficient drives, chassis solutions and renewable energies, the…

  Candidates need a Grade 12 diploma or equivalent machining background or mechanical aptitude. They must read production prints, use computers, and pass a Canadian Controlled Goods Assessment and a criminal background check.

  CNC equipment, precision measuring equipment, IMS, production tracking systems

• 13j

  Fabricator

  Aurora, ON

  17,95–21,60 $/h

  

  Norsat International Inc.: Norsat International, founded in 1977, is a leading provider of innovative communication solutions that enable the transmission of data, audio and…

  1+ ansCandidates need a high school diploma and ideally 1 to 3 years of fabrication or machining experience. They should read mechanical drawings, use measuring tools, and follow safety procedures.

  lathe, drilling machine, saw, shear, CNC machine, calipers

• 13j

  Opérateur

  Les Coteaux, QC

  23–28 $/hTemps plein

  M

  Métalunic

  2+ ansDEP ou Secondaire 5; Plus de 2 ans d'expérience en profilage d'acier ou d'aluminium; Connaissances de base sur machine CNC

  Roll former, CNC machine, Chariot élévateur

15 entreprises