Emplois “pipe rotators” au Canada – Page 8

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 25j

  Plumber apprentice 1st (rotating day shift )

  Nisku, AB

  JC

  Johnson Controls

  Candidates need to be registered as a plumbing apprentice in Alberta and enrolled in a recognized trade school. Experience with brazing copper, PVC pipe and hand and power tools is needed, along with strong teamwork and attention to detail.

  hand tools, power tools, PVC pipe tools

  25j

  Plumber apprentice 2nd (rotating day shift )

  Nisku, AB

  JC

  Johnson Controls

  Candidates need to be registered as a Plumbing Apprentice in Alberta and enrolled in a recognized trade school. Silent-Aire wants people who can work under supervision and as part of a team, handle pressure, and pay close attention to detail.

  hand tools, power tools

  25j

  Plumber apprentice 3rd (rotating day shift)

  Nisku, AB

  JC

  Johnson Controls

  Candidates need to be registered as a plumbing apprentice in Alberta and enrolled in a recognized trade school. Hands-on skills with copper, PVC and hand and power tools are needed, along with the ability to lift up to 50 lbs and follow safety standards.

  hand tools, power tools, PVC pipe tools

  25j

  Plumber (2nd year, 3rd year, 4th year, journeyperson)

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a Red Seal or AIT licensed plumber certification and 500+ hours in the blue book. Solid communication skills, attention to detail and the ability to work under pressure are also required.

  compressed air equipment, compressors, vacuum pumps

• 25j

  Mill Grinding Operator

  Vancouver, BC +4

  39–52 $/hTemps plein

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  Candidates need a high school diploma, a valid driver's licence, and direct mineral processing experience in a hard rock mine with distributed control systems and grinding mills. Mineral processing training such as Edumine or Metso is preferred.

  Overhead crane, Forklift, Loader

  25j

  Mill Dewatering Operator

  Vancouver, BC +5

  Temps plein

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  Candidates need a high school diploma, a valid Class 5 driver's licence and direct hard-rock mineral processing experience, including control systems, filter presses and slurry pumps. Experience with concentrate dryers or commissioning is an asset, and the candidate must work well on a rotating day and night camp schedule.

  plate and frame filter press, slurry pumps, overhead cranes, mobile equipment

  25j

  Mill Flotation Operator

  British Columbia

  39–52 $/hTemps plein

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  Candidates need a high school diploma and a valid driver's licence, plus hard rock mineral processing experience with a DCS such as DeltaV and conventional flotation circuits. Strong troubleshooting, communication and shift-work skills are expected; flotation certification such as Edumine or Metso is preferred.

  flotation cells, slurry pumps, reagent systems, samplers

  25j

  Fixed Plant Maintenance Planner

  Vancouver, BC +4

  Temps plein

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  5+ ansCandidates need at least 5 years of fixed plant maintenance experience in mining or heavy industry, including planning or scheduling. They need knowledge of mechanical and electrical/instrumentation work, CMMS software, and reading drawings. A Class 5 driver's licence is required.

  CMMS, P&ID, single-line diagram, PLC, DCS

• 25j

  Construction Surveyor - Fly In, Fly Out

  Fort McMurray, AB

  Temps plein

  

  Inline Group Inc.

  8+ ansCandidates need 8+ years of civil or industrial surveying experience, a civil engineering or geomatics diploma, and strong GPS and total station skills. A Class 5 driver's licence with a clean record and flexibility with shifts, including overtime, are also required.

  Total station, GPS, Laser scanner, AutoCAD, Civil 3D

  25j

  Survey Party Chief

  Calgary, AB

  Temps plein

  

  Inline Group Inc.

  Candidates need a diploma in Geomatics or a related field plus previous survey experience, a valid Class 5 driver's licence, and willingness to travel and work outdoors in remote terrain. Experience in energy, construction or mining is an asset.

  Total station, GPS, Laser scanner, AutoCAD, Civil 3D

• 25j

  Youth Workers (Spirit of Our Youth- Casual Pool)

  Edmonton, AB

  

  Taproot Community Support Services

  1+ ansCandidates need a human services certificate or equivalent experience, ideally 1 to 3 years in group homes or supported independent living. They also need a valid Class 5 licence with 3 years of driving experience, a vulnerable sector check, First Aid and CPR Level C, crisis and trauma-informed training, and the ability to lift 50 lbs.

  vehicle

• 25j

  Supplier Quality Manager

  Vancouver, BC +2

  134k–140k $/anTemps plein

  

  Kiewit: With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and…

  5+ ansCandidates need a bachelor's degree in engineering or a related field with 5+ years of supplier quality experience, or an associate's degree with 10 years. Knowledge of welding, NDE, ASME codes, coatings and industry standards such as NACE, ASME, AWS and ISO is required, along with experience in oil and gas, power, water or heavy manufacturing.

  Procurement, Heavy equipment operation, Inspection, Test materials, Project management, Welding

• 26j

  General Labour

  Camrose, AB

  Contrat

  PP

  PERMA PIPE INC

  Candidates need to be authorized to work in Canada, reliably commute to Camrose, and pass a pre-employment drug test. They must be able to stand and walk for most of a 10-hour shift, lift up to 50 lbs, and work in industrial conditions with PPE; experience is an asset but not required.

  forklift, pipe coating equipment, foam equipment

  26j

  Experienced Loader Operator

  Camrose, AB

  27 $/hContrat

  PP

  PERMA PIPE INC

  Candidates need a valid Class 5 driver's licence, the ability to work overtime, varied shifts and 10-hour days, and a pre-employment drug test. Pipe coating or occupational safety knowledge and a high school diploma or one year of college are preferred.

  loader, forklift

• 26j

  Inside Sales Representative

  Grande Prairie, AB

  Temps plein

  EH

  Elevation HR

  4+ ansCandidates need a high school diploma, a valid Class 5 licence with a clean driver's abstract, 4 years of oil and gas experience, and strong communication and Microsoft Office skills. Post-secondary business education and sales experience are preferred.

  Microsoft Office, Computers, Phones

• 26j

  Production Worker

  Sault Ste. Marie, ON

  23,17 $/h

  T

  Tenaris: TenarisUniversity, Tenaris’s corporate university, offers high-quality, job-specific curricula and development plans that help them succeed in the…

  Candidates need a high school diploma or GED, the ability to pass drug, fit and medical testing, and comfort standing for 12 hours and lifting up to 50 lbs. Strong English reading skills, basic math and mechanical aptitude are also required.

  Forklift, Front loader, Shunt truck

• 26j

  Design Technician

  Red Lake, ON

  

  Kinross Gold Corporation: Kinross Gold Corporation is a senior gold mining company with a diverse portfolio of mines and projects in the United States, Brazil, Chile,…

  5+ ansKinross Gold Corporation needs candidates with 5 to 10 years as a design technician, designer or engineering technologist. Expert AutoCAD skills and strong 3D modelling and engineering drafting experience are required.

  AutoCAD, Revit, Navisworks, Civil 3D, Plant 3D, Bentley MicroStation

• 26j

  Field Engineer - Mechanical

  Vancouver, BC

  

  Klohn Crippen Berger: KCB is a global engineering, geosciences, and environmental consulting firm driven by Passion, Integrity and a commitment to Excellence.

  Candidates need a mechanical engineering degree with EIT or P.Eng. status in B.C., or field technician experience. They must also have heavy civil or industrial design or field experience, strong analytical skills, a valid Class 5 licence, and the ability to work 10-plus hour days for 14 days in a row.

  Quality assurance procedures, Construction management, Project management, Quality control, Documentation, Mechanical engineering

  26j

  Field Engineer - Mechanical

  Calgary, AB

  

  Klohn Crippen Berger: KCB is a global engineering, geosciences, and environmental consulting firm driven by Passion, Integrity and a commitment to Excellence.

  Klohn Crippen Berger needs a mechanical engineering degree with E.I.T. or P.Eng. status, or field technicians with field experience. Candidates need strong design and analysis skills, heavy civil or industrial construction experience, and the ability to work 10-plus hour days for 14 consecutive days.

  Quality assurance procedures, Construction management, Project management, Quality control, Documentation, Mechanical engineering

  26j

  Field Engineer - Mechanical

  Edmonton, AB

  

  Klohn Crippen Berger: KCB is a global engineering, geosciences, and environmental consulting firm driven by Passion, Integrity and a commitment to Excellence.

  Candidates need a mechanical engineering degree with E.I.T. or P.Eng. status, or existing field experience. They should have strong design and analytical skills, clear English communication, and the ability to work 10 or more hours a day for 14 consecutive days.

  Quality assurance procedures, Construction management, Project management, Quality control, Documentation, Mechanical engineering

• 27j

  Industrial Refrigeration Mechanic

  Winnipeg, MB

  Temps plein

  

  CIMCO Refrigeration

  Candidates need a Journeyperson Refrigeration Mechanic licence and a valid driver's licence. Experience with ammonia or CO2 refrigerants, industrial HVAC, ice rink refrigeration or pipefitting is an asset, as are a Gas Fitter licence and controls experience.

  ammonia refrigeration systems, CO2 refrigeration systems, controls systems

  27j

  Industrial Refrigeration Apprentice

  Winnipeg, MB

  Temps plein

  

  CIMCO Refrigeration

  CIMCO Refrigeration needs a 1st to 5th year apprentice with a valid driver's licence and strong written and verbal communication. Experience with ammonia or CO2 refrigerant, industrial HVAC, ice rink refrigeration or pipefitting, a Gas Fitter licence and UA 254 membership are assets.

  Health and safety, Valid driver's licence, HVAC, Gas fitter, Communication skills

• 27j

  Process Operator, Multiple Openings

  Montréal, QC

  Temps plein

  SE

  Suncor Energy Products Partnership

  5+ ansCandidates need five years of chemical process experience or a DEC/AEC in chemical or industrial process techniques, a Class 4 static-equipment mechanic card, and a valid Class 5 licence. Fluent French, troubleshooting skills and teamwork are also required.

  control board, sampling equipment, ladders, scaffolds

• 27j

  Mechanic I - Millwright

  Waterloo, ON

  Temps plein

  

  University of Waterloo: In a complex and rapidly evolving world, WatSPEED at the University of Waterloo is professional education that’s designed to be different.

  5+ ansCandidates need five years of recent practical millwrighting experience with HVAC, plumbing, piping and process equipment, plus a Certificate of Apprenticeship and Provincial Certificate of Qualification as an Industrial Millwright. Strong troubleshooting, drawing interpretation and machine tool skills are required.

  lathe, milling machine, welding equipment, testing devices, MS Office

13 entreprises