Emplois “CNC turning centers” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 22m

  Machinist

  Stoney Creek, ON

  Temps plein

  IR

  Ingersoll Rand

  5+ ansCandidates need at least 5 years of CNC machining experience, strong CNC setup skills, and the ability to read engineering drawings. Fanuc control experience, basic CNC programming and Red Seal certification are preferred.

  CNC machining centers, CNC turning centers, Fanuc controls, GSS ERP system

• 3j

  Manufacturing Engineer – Machining & DFM

  Ontario

  Temps plein

  ED

  EM Dynamics

  3+ ansCandidates need 3 to 5+ years of hands-on CNC mill or lathe experience, CAM programming skills in Mastercam or similar software, and the ability to read complex prints with GD&T. A bachelor's degree in mechanical or manufacturing engineering, or an equivalent mix of trade certification and engineering experience, is preferred.

  Mastercam, SolidWorks, Esprit, Fusion 360, GibbsCAM, CNC mills

• 4j

  Computer Numerical Control Machinist

  Durham, ON

  Temps plein

  HP

  HCR Permanent Search

  Candidates need hands-on experience as a CNC Machinist on multi-axis machining centers or advanced turning equipment. They also need to read blueprints well and work with common CNC controls such as Fanuc or Heidenhain.

  CNC vertical machining centers, CNC turning centers, Fanuc control, Heidenhain control

• 5j

  General Labourer

  Guelph, ON

  Sur placeTemps plein

  LN

  Linamar - New

  1+ ansLinamar needs candidates with at least 1 year of machine shop experience around CNC milling or turning, plus secondary school completion. Candidates need high physical stamina, strong communication skills, basic math, and comfort with air guns, pumps, pressure washers and WHMIS safety practices.

  Refractometer, Drum dollies, Air guns, Pressure washers, Pumps, Shop vacuums

• 7j

  Machiniste cnc / cnc machinist

  Saint-Eustache, QC

  Temps plein

  GD

  Groupe DCM: DCM Group operates through six centers of excellence:

  1+ ansDEP en usinage ou mécanique industrielle; 1-2 ans d'expérience en usinage CNC; Expérience en setup de centres CNC ou tours CNC

  CNC lathe, CNC machining centre, Manual lathe, Manual milling machine, Precision measuring instruments

  1 mois

  Programmeur cnc / cnc programmer

  Anjou, QC

  Temps plein

  GD

  Groupe DCM: DCM Group operates through six centers of excellence:

  3+ ansDEP en techniques d'usinage, DEC ou baccalauréat en génie mécanique, ou formation équivalente; 3 à 5 ans d'expérience en programmation CNC; Maîtrise de CATIA V5 et de VERICUT

  CATIA V5, VERICUT, Mastercam, TopSolid, Siemens NX, SolidWorks

  1 mois

  Programmeur cnc / cnc programmer

  Saint-Bruno-de-Montarville, QC

  Temps plein

  GD

  Groupe DCM: DCM Group operates through six centers of excellence:

  3+ ansDEP en techniques d'usinage, DEC ou baccalauréat en génie mécanique, ou formation équivalente; 3 à 5 ans d'expérience en programmation CNC; Maîtrise de CATIA V5 et de VERICUT

  CATIA V5, VERICUT, Mastercam, TopSolid, Siemens NX, SolidWorks

• 10j

  Quality Analyst – Escape Management Specialist

  Halifax, NS

  Temps plein

  

  RTX

  3+ ansCandidates need an engineering diploma or degree, or a Red Seal machinist credential, plus at least 3 years in manufacturing. They need quality methodology knowledge, continuous improvement experience, strong Excel and PowerPoint skills, and good written and verbal communication.

  Microsoft Excel, Microsoft PowerPoint

  17j

  Machinist

  Mississauga, ON

  Temps plein

  

  RTX

  Candidates need a licensed machinist or tool and die maker credential, or equivalent experience including CNC programming. They must read complex drawings, operate manual and CNC machines safely, and be cleared for CGP and ITAR.

  jig bore, universal mill, grinder, vertical turret lathe, engine lathe, CNC machining center

  28j

  CNC Turning Set-Up - Red Seal

  Midland, ON

  28,30 $/hTemps plein

  

  RTX

  2+ ansCandidates need an Ontario Secondary School Diploma, a Red Seal or apprenticeship certificate in Tool and Die Maker or General Machinist, and 2 to 5 years of CNC machine shop experience with very close tolerances. Canadian citizenship or permanent residency with five years of residence in Canada is required for security clearance.

  CNC mill-turn lathe, CMM, gauges, metrology tools

• 17j

  CNC Operator

  Edmonton, AB

  Temps plein

  CA

  (CAN) Apergy Canada ULC

  3+ ansCandidates need at least 3 years as a CNC operator, along with blueprint reading, G and M code knowledge, and experience with Okuma, HAAS and Fanuc controls. Math skills, measuring equipment knowledge, attention to detail and the ability to lift up to 50 lbs and stand for 8 hours are also required.

  CNC machine, Okuma control, HAAS control, Fanuc control, measuring equipment

• 22j

  CNC Operator (Afternoon Shift)

  Harrow, ON

  28 $/h

  I

  Integra

  3+ ansIntegra needs candidates with 3 to 5 years of CNC laser, break press and waterjet experience, basic math skills and attention to detail. Crane and forklift experience is an asset, and the job requires lifting up to 50 lbs and standing for long periods.

  CNC laser, break press, waterjet, Voortman, copper bending machine, CNC drilling machine

  1 mois

  CNC Operator - Day Shift

  Harrow, ON

  28 $/h

  I

  Integra

  3+ ansCandidates need 3-5 years of experience with CNC laser, break press and waterjet equipment, basic math skills, and attention to detail. Crane and forklift experience is an asset, and the job requires lifting up to 50 lbs and standing for long periods.

  CNC laser, break press, waterjet, Voortman, copper bending machine, calipers

• 24j

  CNC Machinist (Rotating Shift)

  Hamilton, ON

  65k–82k $/anSur placeTemps plein

  

  Smiths Group

  5+ ansJohn Crane needs a candidate with hands-on CNC milling or turning experience, the ability to read blueprints and G-code, and a high school diploma plus two years of technical training. Over five years of related experience and Red Seal or equivalent are also listed, along with the ability to work loud plant-floor conditions wearing PPE.

  CNC mill, vernier calliper, CMM, Mazak, Okuma, Haas

• 1 mois

  Canada Field Service Technician

  Cambridge, ON

  Temps plein

  MC

  Mazak Corporation

  1+ ansCandidates need a Millwright or Electrician certification or diploma and 1-3 years of field service experience. They should be able to read engineering drawings and PLC and hydraulic/pneumatic circuits, hold a G driver's licence, and have strong Windows, Office and writing skills.

  Test indicators, Test bars, Clamp force gauges, MS Office, PLC

  1 mois

  Field Service Technician

  British Columbia

  Temps plein

  MC

  Mazak Corporation

  5+ ansCandidates need 5-7 years of field service experience and a 2-year technical diploma in electronics, mechanical or machine tool assembly. They must read engineering drawings, understand PLC and hydraulic/pneumatic circuits, and lift up to 50 lbs repeatedly.

  Test indicators, Test bars, Gages

  1 mois

  Area Sales Manager - Northern Alberta

  Edmonton, AB

  Temps plein

  MC

  Mazak Corporation

  5+ ansCandidates need an associate or technical diploma and at least 5 years of combined sales and machine tool or metal industry experience. They must read blueprints, hold a G driver's licence, and have strong writing and reporting skills.

  Sales, Presentation skills, CNC, Technical support, Machine tools, Microsoft Windows

  1 mois

  Field Service Technician

  Cambridge, ON

  Temps plein

  MC

  Mazak Corporation

  1+ ansCandidates need a Millwright or Electrician certification or diploma, 1 to 3 years of field service experience, the ability to read engineering drawings, PLC and hydraulic or pneumatic circuits, a G driver's licence, and strong writing and reporting skills.

  indicators, test bars, clamp force gauges, MS Office, PLC

• 1 mois

  CNC Technician

  Windsor, ON

  Temps plein

  

  Porter Engineered Systems - A Division of Pangeo Group: were acquired by Middlemarket Capital Management Company and were combined with Kadee Metalfab LLC to form Porter Group LLC.

  5+ ansCandidates need at least 5 years of CNC machining experience in an automotive or high-volume manufacturing setting, with hands-on work on Mazak vertical machining centers and CNC turning. They must read blueprints and GD&T, program G-code, and work with tool presetters, fixtures and hydraulic workholding.

  Mazak vertical machining centers, CNC lathes, tool presetters, robotic machine tending systems, hydraulic workholding

• 1 mois

  CNC Machine Operator

  Arborg, MB

  Temps plein

  

  Vidir Solutions Inc: Vidir Solutions is a leading manufacturer and worldwide supplier of vertical motorized inventory management, material handling, storage carousels…

  Candidates need basic math skills and the ability to read blueprints and work orders. Experience with precision measuring tools and common shop equipment is preferred. Post-secondary education in CNC or machining is an asset but not required.

  CNC mill, CNC lathe, Sheet laser, Tube laser, Panel bender, Calipers

12 entreprises