Emplois “Cadence EMX” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 46m

  Analogue RF IC Designer for EM Simulation Tasks

  Canada

  Temps plein

  B

  Braintrust

  Candidates need hands-on RF IC design experience, including laying out passives such as spiral inductors, transformers, baluns and transmission lines. They must have run EM simulations and read results like S-parameters, inductance and quality factor, work with GDS layouts and S-parameter files, and have enough Python to script simulations.

  KLayout, Palace, openEMS, ngspice, scikit-rf, Cadence EMX

• 21j

  Hardware Engineer - New Grad

  Ottawa, ON

  Temps plein

  CC

  Ciena Canada ULC

  Candidates need to be working toward a bachelor's, master's or PhD in electrical engineering or a related science, with prior internship, co-op or project experience. Strong analog design skills in BiCMOS or CMOS, proficiency with Cadence, Mentor and Synopsys tools, and good English communication are required.

  Cadence Virtuoso, Calibre, STAR-RC, MMSIM, Synopsys, Mentor

  1 mois

  Senior Analog RF Design Engineer

  Ottawa, ON

  117k–187k $/anTemps plein

  CC

  Ciena Canada ULC

  5+ ansCiena needs a Master's degree in electrical engineering or equivalent and 5 to 10 years of RF analog circuit design for telecom. Candidates need high-speed RF, op-amp and BiCMOS design experience, plus Cadence and mixed-signal simulation skills.

  Cadence Virtuoso, Cadence AMS, Calibre, HFSS, EMX, VNA

  1 mois

  Principal Analog Circuit Designer

  Ottawa, ON

  142k–226k $/anTemps plein

  CC

  Ciena Canada ULC

  7+ ansCandidates need a Master's degree in an engineering or applicable science field and 7+ years of advanced CMOS or BiCMOS design experience. They must have mm-wave analog design experience and skill with Cadence Virtuoso, Calibre, STAR-RC and MMSIM.

  Cadence Virtuoso, Calibre, STAR-RC, MMSIM, HFSS, EMX

• 1 mois

  Senior Analog/mixed-signal IC Developer - Acacia - (Hybrid)

  Kanata, ON +1

  HybrideTemps plein

  

  Cisco Systems Canada Co.

  8+ ansCandidates need a BSEE or higher engineering degree with substantial experience designing, simulating and measuring high-speed ICs in at least three listed areas, such as serial links, data converters, PLLs and amplifiers.

  Cadence Virtuoso, Spectre, SpectreX, APS, Matlab, EMX

  1 mois

  Principal Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON

  HybrideTemps plein

  

  Cisco Systems Canada Co.

  15+ ansCandidates need at least 15 years of related experience (or a master's with 10, or a PhD with 7) and hands-on design, simulation and measurement of high-speed ICs. They must have led a team on high-performance circuits.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  1 mois

  Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON +1

  HybrideTemps plein

  

  Cisco Systems Canada Co.

  8+ ansCandidates need a bachelor's with 8 years of related experience, a master's with 6, or a PhD with 3, plus hands-on experience designing, simulating and measuring high-speed ICs in at least three areas such as serial links, output drivers, PLLs, clock distribution, op-amps or equalization. Experience with FinFET/GAA technologies, high-frequency layout and Cadence tools is preferred.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  1 mois

  Senior Analog/mixed-signal IC Designer - Acacia (Hybrid)

  Kanata, ON

  HybrideTemps plein

  

  Cisco Systems Canada Co.

  12+ ansCandidates need a BSEE with 12+ years, an MS with 8+ years, or a PhD with 5+ years of experience. They must have high-speed IC design experience in at least three listed areas, such as serial links, PLLs, or equalization.

  Cadence Virtuoso, Spectre, SpectreX, Calibre, EMX, Matlab

  1 mois

  Senior Mixed-Signal Designer - Acacia (Hybrid)

  Kanata, ON

  HybrideTemps plein

  

  Cisco Systems Canada Co.

  12+ ansCandidates need a bachelor's with 12 years, a master's with 8, or a PhD with 5 years of related experience, plus hands-on high-speed IC design across at least three areas such as SerDes, PLLs, clock distribution or equalization.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

• 1 mois

  Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON +1

  Temps plein

  

  Cisco

  8+ ansCandidates need a bachelor's with 8 years, a master's with 6, or a PhD with 3 years of related experience, plus hands-on design, simulation and measurement of high-speed ICs in at least three areas such as SerDes, PLLs, output drivers, clock distribution, amplifiers and equalization.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  1 mois

  Senior Mixed-Signal Designer - Acacia (Hybrid)

  Kanata, ON

  Temps plein

  

  Cisco

  5+ ansCandidates need a degree plus 5 to 12 years of related experience, depending on the degree level, and experience designing, simulating and measuring high-speed ICs across at least three of: SerDes, output drivers, PLLs, clock distribution, op-amps/PGAs or equalization. Experience with FinFET, layout and design tools is preferred.

  Cadence Virtuoso, Spectre/APS/SpectreX, Calibre, EMX, Matlab

  1 mois

  Principal Analog/mixed-signal IC Developer - Acacia (Hybrid)

  Kanata, ON

  Temps plein

  

  Cisco

  7+ ansCandidates need a Bachelor's with 15 years, a Master's with 10 years, or a PhD with 7 years of related experience. They must have high-speed IC design experience in at least three areas and have led a high-performance circuit team.

  Cadence Virtuoso, Calibre, EMX, Matlab

  1 mois

  Senior Analog/mixed-signal IC Designer - Acacia (Hybrid)

  Kanata, ON

  Temps plein

  

  Cisco

  12+ ansCisco candidates need 12+ years of experience with a BSEE, 8+ with an MS, or 5+ with a PhD. Experience in high-speed IC design in at least three areas such as SerDes, PLLs, output drivers, equalization and amplifiers is required.

  Cadence Virtuoso, Spectre, Calibre, EMX, Matlab

  1 mois

  Senior Analog/mixed-signal IC Developer - Acacia - (Hybrid)

  Kanata, ON +1

  Temps plein

  

  Cisco

  12+ ansCandidates need a BSEE with 12+ years of experience, or an equivalent MS or PhD background, plus hands-on design, simulation and measurement of high-speed ICs in at least three areas such as serial links, PLLs, drivers and data converters. Experience with FinFET technology, high-speed layout and Cadence Virtuoso is a plus.

  Cadence Virtuoso, Spectre, SpectreX, APS, Matlab, EMX

4 entreprises