Emplois “Rockwell Automation controls” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 33m

  Electrical Controls Designer/Panel Builder

  Penetanguishene, ON

  40 $/hTemps plein

  

  Techform, a Division of Magna Closures Inc.

  Candidates need an Electrical Engineering Technician or Technologist diploma (or equivalent experience), proven SolidWorks Electrical skills, and hands-on control panel and industrial machine wiring experience. Working knowledge of Rockwell controls, PLCs, EtherNet/IP, VFDs and machine safety is required, with Ontario 442A preferred.

  SolidWorks Electrical, Rockwell Automation controls, PanelView Plus HMI

• 5h

  Electrical Engineer/Technologist

  Richmond, BC

  Sur placeTemps plein

  WP

  Wexxar Packaging

  3+ ansWexxar Packaging needs candidates with a bachelor's degree or diploma in electrical, mechatronics or automation engineering and 3+ years of industrial automation experience. Candidates should have PLC, servo and machine commissioning skills, and be proficient in SolidWorks Electrical and Microsoft Office.

  Siemens TIA Portal, Studio 5000, FactoryTalk View, SolidWorks Electrical, Microsoft Office, SyteLine

• 20h

  Control and Automation Engineer

  Calgary, AB

  Contrat

  

  Agilus Work Solutions: Experts in Specialized Talent for Nearly 50 years. Canada's largest, full service, privately-owned recruiting firm.

  5+ ansCandidates need a bachelor's degree in electrical engineering, a Professional Engineer (P.Eng.) designation with PEO, 5 to 10+ years of industrial electrical engineering experience and 2 to 3+ years of commissioning experience. Hands-on troubleshooting and PLC/DCS programming, preferably on Rockwell platforms, are needed.

  PLC, DCS, Rockwell, AutoCAD, MicroStation

  20h

  Control and Automation Engineer

  Greater Sudbury, ON

  Contrat

  

  Agilus Work Solutions: Experts in Specialized Talent for Nearly 50 years. Canada's largest, full service, privately-owned recruiting firm.

  5+ ansCandidates need a Bachelor's in Electrical Engineering, a PEO Professional Engineer designation, and 5 to 10 years of industrial electrical experience. Agilus also requires 2 to 3 years of commissioning experience and PLC or DCS programming skills, preferably on Rockwell platforms.

  AutoCAD, MicroStation, Rockwell PLC, DCS

• 24h

  Intermediate EIC Engineer/ EIT

  Vancouver, BC

  Temps plein

  

  BQE Water Inc.: BQE Water is a service provider specializing in water treatment and management for metals mining, smelting and refining.

  5+ ansCandidates need a bachelor's degree in an electrical, control systems, mechatronics or related engineering discipline, plus over five years of industrial controls experience. Hands-on PLC and HMI programming, knowledge of MCCs, VFDs and process instrumentation, and P&ID interpretation are required.

  Rockwell Studio 5000, TIA Portal, GX Works, FactoryTalk View, AVEVA Wonderware, EPLAN

• 2j

  Analyste en automation

  Québec, QC

  Temps plein

  

  GSK

  2+ ansBaccalauréat en génie électrique ou en génie de la production automatisée; 2 ans d'expérience en automation et programmation d'automates; Maîtrise de Rockwell, FactoryTalk, Allen-Bradley ou Siemens

  SCADA, Rockwell RS500, Rockwell RS5000, Allen-Bradley, Siemens, GE iFIX

• 2j

  Analyste en automation

  Québec, QC

  Sur placeTemps plein

  IB

  ID Biomedical Corporation of Quebec

  2+ ansCandidates need a bachelor's degree in electrical or automated production engineering and about 2 years of automation and PLC programming experience, ideally with Siemens, Rockwell, Allen-Bradley or GE iFIX. Intermediate English and Office skills are required, and candidates will be tested in English and computer skills.

  SCADA, Siemens, Allen-Bradley, GE iFIX, SAP

• 2j

  Controls Engineer - Multiple Openings (Body, Paint, GA etc.)-11

  Oshawa, ON

  Sur placeTemps plein

  GO

  GM of Canada Company

  3+ ansCandidates need a bachelor's degree in electrical or mechatronics engineering or a college diploma in a related field, preferably with 3 years of automation controls experience. Strong Control Logix PLC programming, robotics troubleshooting, and familiarity with VFDs, HMIs and automotive assembly are needed.

  Control Logix PLC, Fanuc robots, HMIs, AutoCAD, Maximo, Rockwell software

• 2j

  System Integrator

  Greater Sudbury, ON

  67k–93k $/anHybrideTemps plein

  

  CIMA+

  3+ ansCIMA+ needs candidates with over 3 years of system integration and SCADA programming experience, ideally in municipal water or industrial settings. They must know PLC, RTU and DCS programming and SCADA/HMI platforms, and have a control systems or programming background.

  PLC, SCADA, HMI, Allen-Bradley, Siemens, Wonderware InTouch

  2j

  System Integrator

  Guelph, ON

  67k–93k $/anHybrideTemps plein

  

  CIMA+

  3+ ansCIMA+ needs candidates with over 3 years of system integration and SCADA programming experience, ideally in municipal water or industrial settings. They must know PLC, RTU and DCS programming and SCADA/HMI platforms, and have a control systems or programming background.

  PLC, SCADA, HMI, Allen-Bradley, Siemens, Wonderware InTouch

• 2j

  Developer - Design and Development

  Waterloo, ON

  Temps plein

  TC

  Tata Consultancy Services

  Tata Consultancy Services needs candidates with hands-on experience in PLC and SCADA engineering, including Rockwell Allen-Bradley and AVEVA platforms. Candidates also need experience with commissioning, documentation and leading technical teams.

  Studio 5000, RSLogix 5000, AVEVA System Platform, AVEVA SCADA, InTouch, Historian

• 2j

  Senior Control Engineer

  Woodbridge, ON

  Temps plein

  AC

  ALTEN Canada

  10+ ansALTEN Canada asks for at least 10 years of PLC programming experience with Rockwell or Siemens, including developing systems from scratch. Candidates also need FANUC or ABB robot programming experience, VFD control experience, and the ability to travel to customer sites, mainly in the U.S.

  Rockwell PLC, Siemens PLC, FANUC robot, ABB robot, VFD, motion controllers

• 2j

  Senior MES Quality Validation Expert

  Toronto, ON

  Temps plein

  AC

  Amaris Consulting | Part of Mantu

  10+ ansAmaris Consulting needs candidates with 10+ years in GMP validation or quality, at least four years on computerized systems, and experience approving MES validation. Strong knowledge of 21 CFR Part 11, EU GMP Annex 11, GAMP 5 and data integrity is required, along with fluent English.

  MES, DeltaV DCS, PI Historian, Werum PAS-X, Emerson Syncade, Rockwell PharmaSuite

• 2j

  Chef d’équipe d’automatisation/Cheffe d’équipe d’automatisation

  Mirabel, QC

  Temps plein

  A

  Astek

  5+ ansAstek needs at least 5 years of PLC/HMI programming or technical project management, ideally in automation or manufacturing. Candidates need a bachelor's in electrical, computer or automation engineering, bilingual French and English, and a valid driver's licence.

  PLC, HMI, Rockwell, Siemens, Omron, ERP

• 2j

  Ingénieur en automatisation – Chef(fe) d’équipe

  Montréal, QC

  Temps plein

  MP

  METIER PLUS

  7+ ansBaccalauréat en génie électrique, génie de la production automatisée ou discipline connexe; Au moins 7 ans d’expérience en automatisation et contrôle industriel; Maîtrise de la programmation PLC et HMI (Allen-Bradley, Ro

  PLC, HMI, AutoCAD, Allen-Bradley, Rockwell Automation, Siemens

• 3j

  QA Product Specialist- Industrial Communication

  Waterloo, ON

  Temps plein

  HN

  HMS Networks

  3+ ansCandidates need a degree or diploma in electrical, electronics, automation or a related field, plus 3+ years of hands-on industrial automation or embedded testing. They need programming skills in Python or C#/C++, PLC experience, and hands-on work with an industrial Ethernet protocol such as PROFINET or EtherNet/IP.

  Python, pytest, Robot Framework, Git, PLC, TIA Portal

  3j

  Embedded Software Developer

  Waterloo, ON

  Temps plein

  HN

  HMS Networks

  3+ ansCandidates need 3+ years of embedded software experience with strong C skills on microcontrollers or SoCs, plus knowledge of real-time software, Ethernet and TCP/IP, and hardware debugging. A degree in electronics, embedded systems, computer engineering or computer science, or equivalent experience, is required.

  Git, CMake, Make, debugger, oscilloscope, logic analyzer

• 3j

  PLC Programmer

  Niagara Falls, ON

  Temps plein

  IG

  itec group Inc.

  3+ ansCandidates need 3+ years of PLC programming and industrial automation experience, strong Allen-Bradley/Rockwell skills, and HMI programming ability. A valid driver's licence and passport, plus willingness to travel about 30%, are required.

  Allen-Bradley PLCs, Rockwell Automation, VFD

• 3j

  Automation Engineer

  Belleville, ON

  Temps plein

  A3

  Aluminum 3104

  3+ ansCandidates need an engineering degree (electrical, automation, controls, mechatronics or computer), 3-5 years of industrial automation experience, and strong hands-on PLC programming and troubleshooting skills. Experience with HMIs, drives, industrial networks and reading electrical schematics is also needed.

  PLC, HMI, SCADA, VFD, servo drives, vision systems

• 3j

  PLC / HMI Programmer

  Mississauga, ON

  Temps plein

  VI

  Valley Integration Inc

  5+ ansCandidates need a degree in Electrical, Instrumentation, or a related engineering discipline and 5+ years of complex industrial automation experience. Expert knowledge of PLC and SCADA systems from Siemens, Rockwell, Ignition, FactoryTalk, or Wonderware is required, along with strong troubleshooting and communication skills.

  Siemens PLC, Rockwell PLC, Ignition, FactoryTalk, Wonderware

• 3j

  Automation Specialist

  Windsor, ON

  

  Sonepar

  Candidates need an electrical engineering technology diploma or equivalent experience, and five years of automation or technical sales experience is an asset. Sonepar also wants strong technical knowledge of industrial automation, commercial skill in closing deals, and clear communication with engineers and business leaders.

  Rockwell Automation products, CRM

• 3j

  Automation Business Development Manager

  Kamloops, BC

  Sur placeTemps plein

  

  REXEL

  2+ ansCandidates need an electrical, electronics or automation diploma or degree and at least 2 years in automation or technical product sales or support. They should understand industrial automation, Rockwell controllers and HMIs, Ethernet/IP networking and single-line drawings.

  Rockwell Automation Controllers, Allen-Bradley software, HMI, Single-line electrical drawings

• 3j

  Sr. Systems Integrator

  Saskatoon, SK

  Temps plein

  SA

  Shockwave Automation

  Shockwave Automation needs candidates with a background in instrumentation, electrical or automation engineering technology, or equivalent field experience. Strong hands-on experience with DCS, PLC and HMI platforms is required, and mining experience is preferred.

  ABB 800xA, Emerson DeltaV, Rockwell PlantPAx, FactoryTalk View SE Distributed, FactoryTalk Optix, Ignition

• 3j

  Operational Technology Manager

  Burlington, ON

  Sur placeTemps plein

  ML

  Maple Leaf Foods Inc.

  10+ ansCandidates need a post-secondary credential in engineering, automation or a related field, with at least 10 years of industrial automation and OT experience, including multi-site SCADA delivery in food and beverage manufacturing.

  Ignition, AVEVA, FactoryTalk, PLC, HMI, historians

21 entreprises