Emplois “Specialized hose shop tools” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1j

  Industrial Vacuum Truck Operator

  Nanaimo, BC +1

  37,79 $/hTemps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a valid Class 3 driver's licence with a clean commercial driving abstract, and Class 1 is an asset. They must be able to drive a manual transmission, work in harsh conditions and confined spaces, and lift up to 50 lbs; industrial pulp and paper or oil and gas experience is preferred.

  Vacuum truck, High-pressure pump, Hoses, Rigging equipment

  1 mois

  Vacuum and High Pressure Pump Operator, Industrial Services

  Kitimat, BC

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a valid Class 3 driver's licence with an acceptable driving abstract, and the ability to drive a manual transmission. They must be able to work outdoors in all weather, stand for long periods, lift up to 50 lbs, and be flexible for after-hours call-outs.

  vacuum truck, hydro-vac, combo-vac, high-pressure pump, hoses

  1 mois

  Vacuum Truck Operator, Industrial Services

  Trail, BC

  Temps plein

  GE

  GFL Environmental Services Inc.

  Candidates need a valid Class 3 driver's licence with an acceptable commercial driving abstract, and a Class 1 licence is an asset. They must be willing to work after hours, travel, and work in all weather while lifting up to 50 lbs.

  vacuum truck, hydro-vac, combo-vac, high-pressure pump, heat exchanger, circulation unit

• 2j

  Industrial Painter

  Winnipeg, MB

  24–27 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of hands-on industrial painting or sandblasting experience, plus skill with conventional spray equipment and DFT gauges. They must read fabrication drawings, handle basic math, pass a respirator fit test, lift up to 50 lbs, and have reliable transportation for an early start.

  Sandblasting equipment, DFT gauge, Respirator, Painting equipment (nozzles, hoses)

  1 mois

  Sandblaster - Industrial Painter

  Winnipeg, MB

  24 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of industrial painting or sandblasting experience, including epoxy and enamel work and use of DFT gauges. A respirator fit test, the ability to lift 50 lbs and reliable transportation are also required.

  Conventional spray equipment, DFT gauge, Sandblasting equipment

  1 mois

  Sandblaster - Industrial Painter

  Winnipeg, MB

  19,94–21,97 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of hands-on industrial painting or sandblasting experience, with conventional spray application and epoxy or enamel coatings. They must read fabrication drawings, use DFT gauges, pass a respirator fit test, lift up to 50 lbs, and have reliable transportation for an early start.

  DFT gauge, spray equipment, sandblaster, respirator

• 3j

  General Labourer

  Guelph, ON

  Sur placeTemps plein

  LN

  Linamar - New

  1+ ansLinamar needs candidates with secondary school or equivalent, at least 1 year in a machine shop around CNC milling or turning, and strong English communication. Candidates must handle heavy lifting up to 50 lbs, follow PPE and WHMIS safety rules, and have mechanical aptitude. Forklift or crane certification is a major asset.

  forklift, pressure washer, pump, shop vacuum, air gun, mixing equipment

• 5j

  Container welder (first shift)

  Ottawa, ON

  35,31 $/hTemps plein

  WM

  Waste Management Canada

  2+ ansCandidates need at least 2 years of welding experience and CWB certification. Knowledge of welding, electrical and hydraulic systems and the ability to read schematics are needed.

  cutting torch, hammer drill, porta-power, sledge hammer, pressure gauge, service truck

• 10j

  Journeyman Heavy Duty Mechanic with Off Road

  Aldersyde, AB

  

  Volker Stevin Canada

  5+ ansVolker Stevin Canada needs candidates with 5+ years of repair and maintenance experience on highway maintenance equipment and strong diagnostic skills. A Class 3 licence with air brake endorsement, a CVIP inspection licence and on-road vehicle experience are assets.

  Diagnostic equipment, Overhead crane, Mobile crane, Forklift, Oxy/acetylene torch

• 13j

  Container Welder (First shift)

  Carp, ON +1

  35,31 $/hSur placeTemps plein

  W

  WM

  2+ ansCandidates need 2 years of welding experience and a CWB certification. They must also read electrical and hydraulic schematics and work safely under WM's safety rules.

  Cutting torch, Hammer drill, Porta-power, Sledge hammer, Pressure gauge, Service truck

• 20j

  Truck Upfit Technician (Truck Body Installer)

  Edmonton, AB

  TK

  THERMO KING WESTERN INC.

  Candidates need strong mechanical aptitude, experience with hand and power tools, and the ability to read a tape measure accurately. A valid Class 5 driver's licence is required, and the physically active work involves lifting, bending, kneeling and climbing.

  Hand tools, Power tools, Tape measure, Forklift, Overhead crane

• 1 mois

  Partsperson/Shop Hand; Tire (Hyd Hose Repair)

  Stoughton, SK

  Temps plein

  NS

  NAPA - STOUGHTON - Cavalier Auto Body Ltd

  Candidates need to be mechanically inclined and able to lift up to 60 lbs and stand for long shifts. Knowledge of auto, agricultural or oilfield parts and basic computer skills are assets but not required.

  Specialized hose shop tools

• 1 mois

  Heavy Duty Mechanic (Hydraulics & Electrical)

  Nisku, AB

  

  Ace Vegetation Control Services Ltd

  Candidates need strong experience repairing heavy-duty equipment, diesel engines, hydraulics and electrical systems. A Journeyman Heavy Duty Mechanic certification is preferred, though equivalent mechanical experience may be considered.

  Diagnostic equipment, Hydraulic tools, Spray systems

• 1 mois

  Technicien d'atelier / Shop Technician

  Jonquière, QC

  Sur placeTemps plein

  E

  Everguard

  Aptitudes mécaniques et intérêt pour le travail technique pratique; Sens aigu de la sécurité et souci du détail; Capacité à soulever des charges et à utiliser outils manuels et électriques

  extinguishers, fire hoses, hand tools, power tools, calibrated meters

• 1 mois

  Pipefitter Steamfitter

  Brampton, ON

  Temps plein

  

  Magna International Inc.

  5+ ansCandidates need at least 5 years of automotive assembly or tooling experience. They must read blueprints and schematics, use hand and machine tools, and bring their own tools.

  Parker 801 hose, Hand benders, Power threaders, Lathe, Milling machine, Drill press

• 1 mois

  Maintenance Technician FSM

  Canada

  28 $/hTemps plein

  II

  ITC Inland Technologies Canada Incorporated

  2+ ansCandidates need a high school diploma or equivalent and at least 2 years of mechanical or electrical maintenance experience. They must know standard and specialty diagnostic tools, diesel machines and fluids, and be comfortable with Microsoft Office. The posting also asks for a valid driver's licence and the ability to pass a background check.

  photo tachometer, diagnostic tools, scanners, meters, Microsoft Excel, Microsoft Word

• 1 mois

  Mechanical Maintenance Technician-1

  Canada

  Sur placeTemps plein

  

  Amentum

  5+ ansFive years of maintenance experience in industrial HVAC, machine repair or automotive repair; High school diploma or equivalent; Strong electrical skills, including control systems and 480V systems

  CMMS, PLC, Allen Bradley, forklift, overhead crane, hand tools

  1 mois

  Mechanical Maintenance Technician-2

  Canada

  Sur placeTemps plein

  

  Amentum

  5+ ansDiplôme d'études secondaires ou équivalent; Cinq ans d'expérience en maintenance (CVC industriel, réparation de machines, ou réparation automobile); Solides compétences électriques, dont systèmes de contrôle et 480 V

  CMMS, PLC, Forklift, Overhead crane, Hoist, Hand tools

• 1 mois

  Shop Technician

  Concord, ON

  Sur place

  

  SunSource: With over 250 locations and 3,500+ employees, SunSource is the leading value-added industrial distributor and solutions provider for North America’s…

  Candidates need a high school diploma, experience with power and hand tools, saws, machines, tube benders and calipers, and good communication skills. Computer proficiency and the ability to lift 50 lbs are also required, and technical training or certification is preferred.

  lathe, mill, air compressor, cleaning tanks, forklift, crimping machine

14 entreprises