Emplois “chemical test equipment” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 2m

  Scientist

  Burnaby, BC

  Stage

  MN

  Mérieux NutriSciences - North America

  This position is responsible for carrying out analysis of official racing samples in accordance with requirements specified by the Canadian Pari-Mutuel Agency; Meet quality specifications defined by the laboratory to…

  2m

  Research Chemist

  Mississauga, ON

  Temps plein

  MN

  Mérieux NutriSciences - North America

  Initiate action to prevent or minimize departures from the quality system or test procedures, including addressing resource needs to properly correct issues such as client turn-around time…; Communicate procedural and…

• 7m

  2nd year Steamfitter/Pipefitter Apprentice - Cenovus Lloydminster Upgrader - Maintenance

  Saskatchewan

  Temps plein

  J

  Jardeg

  Read and interpret basic drawings, specifications, and work instructions while developing trade knowledge and technical skills; Maintain a clean and safe work environment and comply with all company, client, and…

  17m

  Instrumentation Technician Journeyperson - CNRL Horizon MT

  Fort McMurray, AB

  Temps plein

  J

  Jardeg

  Candidates need a Journeyperson certification or Interprovincial Red Seal, a valid apprenticeship and a driver's abstract. They must also hold or complete CSTS 09 or CSO, confined space, fall protection, AWP, overhead crane and rigging tickets, and pass a pre-access drug and alcohol test and mask fit.

  pipe threading equipment, pipe bending equipment, leak testing equipment

• 12m

  Decommissioning Engineer

  Ottawa, ON

  Temps plein

  AC

  Amaris Consulting | Part of Mantu

  3+ ansAmaris Consulting needs candidates with an engineering or pharmaceutical science diploma and at least 3 years of GMP work. Candidates need hands-on experience with oral solid dose equipment, CQV and decommissioning experience, and knowledge of Health Canada and FDA rules.

  SAP, CMMS, Kneat, PLC, HMI

  12m

  Decommissioning Lead

  Ottawa, ON

  Temps plein

  AC

  Amaris Consulting | Part of Mantu

  8+ ansAmaris Consulting needs a candidate with an engineering or pharmaceutical sciences degree and at least 8 years in GMP manufacturing or validation, including oral solid dose work. Candidates must have led at least one decommissioning project and know Health Canada GMP, FDA 21 CFR Parts 11, 210 and 211, GAMP 5 and ASTM E2500.

  SAP, CMMS, PLC, HMI, SCADA, Kneat

  12m

  Validation Engineer HVAC & Equipment

  Toronto, ON

  Temps plein

  AC

  Amaris Consulting | Part of Mantu

  1+ ansCandidates need a bachelor's degree or technical diploma in an engineering discipline and 1 to 5 years of qualification or validation experience in a regulated industry. They also need basic HVAC knowledge, GMP/cGMP familiarity, fluent English and strong attention to detail.

  HVAC software

• 17m

  Engineering Technical Specialist, Schulich School of Engineering

  Calgary, AB

  Temps plein

  UO

  University of Calgary

  Candidates need an engineering technology diploma (a bachelor's degree is an asset) and several years of hands-on mechanical or lab experience. Strong troubleshooting, practical skills with pumps, valves and fluid systems, and clear communication are required.

  hand tools, power tools, gas chromatography, liquid chromatography, data acquisition systems

  37m

  Spatial & Single Cell Omics Technician, Office of the Associate Dean Research

  Calgary, AB

  Temps plein

  UO

  University of Calgary

  3+ ansCandidates need a Master's (preferred) or Bachelor's degree in a life-science field and at least three years of directly related lab experience with next-generation sequencing and molecular biology. Hands-on Illumina experience, with NovaSeq X strongly preferred, and familiarity with spatial or single-cell workflows are needed.

  Illumina NovaSeq X, 10x Genomics instruments, Automated liquid handling systems, Laboratory information system, Microsoft 365, Linux command-line tools

• 22m

  Custodial Workload & Training Specialist

  Vancouver, BC

  Temps plein

  TU

  The University of British Columbia

  5+ ansCandidates need a Certificate in Building Service Management, or high school completion plus at least five years of related experience, or an equivalent mix of education and experience. The University of British Columbia also expects respect for diverse perspectives and a commitment to equity, diversity and inclusion.

  custodial scheduling database

• 1h

  Electrical Production Technician

  Burlington, ON

  Temps plein

  CC

  Circuit Check Inc.

  3+ ansCandidates need a high school diploma or equivalent and 3+ years of electrical assembly experience. They must read electronic blueprints, follow ESD and safety procedures, and work well in a team with full-time attendance.

  Digital multimeter, Power supplies, Microscope, Soldering iron, CAD

  1h

  Mechanical Production Tech

  Burlington, ON

  Temps plein

  CC

  Circuit Check Inc.

  3+ ansCandidates need a high school diploma or GED, 3+ years of general machinist experience, and the ability to read mechanical drawings and blueprints. Working knowledge of measuring instruments, forklift operation and electrostatic discharge is required, and CAD skills and flexible hours are preferred.

  measuring instruments, forklift, CAD, machine tooling, testing equipment

• 1h

  Data Center Facilities Technician

  York, ON

  Temps plein

  S

  Salute

  5+ ansCandidates need at least 5 years of hands-on experience operating and maintaining data center or large commercial electrical and mechanical systems. They must know NFPA, NEC and OSHA safety codes and be able to read electrical and mechanical one-line diagrams.

  Switchgear, UPS systems, Diesel generators, PDU, ATS/STS units, Chillers

  1h

  Data Center Operator

  Toronto, ON

  Temps plein

  S

  Salute

  Candidates need hands-on experience with medium-voltage switchgear, generators, UPS systems and industrial electrical and mechanical equipment, plus knowledge of NFPA, NEC, NETA and IEEE standards. Experience leading root cause analysis, emergency response and vendor management is required, and liquid cooling experience is preferred.

  UPS, generators, switchgear, PLC, power monitoring systems, building automation systems

• 1h

  Supervising Stationary Engineer (Water) - Promotional Only

  Alberta

  Temps plein

  CO

  City of St. Louis

  3+ ansCandidates need three years of experience as a licensed Stationary Engineer, or an equivalent mix of training and experience, plus a Stationary Engineer's License (Class I or II) and a valid driver's licence. Strong supervisory, data analysis, equipment repair and decision-making abilities are required.

  HVAC systems, refrigeration manifold, personal computer, blueprints, fuel usage charts, chemical test equipment

• 1h

  Wind Technician (Dalum, Alberta)

  Alberta

  Temps plein

  SG

  Siemens Gamesa

  Connaissances éprouvées en systèmes électriques; Capacité à garder son calme en situation stressante ou dangereuse; Excellentes compétences en communication et en service à la clientèle

  Microsoft Outlook, Microsoft Excel

• 1h

  PSG Technologist (R) - Full Time - HAMILTON, NEW JERSEY - ON-SITE

  Hamilton, ON

  Temps plein

  

  Capital Health (US)

  2+ ansCapital Health needs candidates with a high school diploma or GED, an active RPSGT or RST credential, and an NJ polysomnographic technologist licence. They also need at least eighteen months of supervised polysomnography experience and current AHA BLS certification.

  CPAP equipment, Oximetry, Capnography, Autoset, Actiwatch, EEG equipment

• 1h

  Shift Engineer, Full-Time (Parental Leave Contract | November 2026 - February 2027)

  Vancouver, BC

  36,71 $/hSur placeContrat

  

  AccorHotel

  Candidates need previous maintenance experience, ideally in painting, plumbing, tiling or carpentry in a large commercial building. Strong problem-solving, guest service and mechanical aptitude are needed, along with good English and the ability to work safely with minimal supervision.

  HVAC equipment, painting equipment

  1h

  Shift Engineer, Full-Time (Parental Leave Contract | November 2026 - February 2027)

  Vancouver, BC

  36,71 $/hSur placeContrat

  

  AccorHotel

  Candidates need previous maintenance experience, ideally in painting, plumbing, tiling or carpentry in a large commercial building. Strong problem-solving, guest service and mechanical aptitude are needed, along with good English and the ability to work safely with minimal supervision.

  HVAC equipment, painting equipment

  2h

  Shift Engineer, Full-Time (Parental Leave Contract | November 2026 - February 2027)

  Vancouver, BC

  36,71 $/hSur placeContrat

  

  AccorHotel

  Candidates need previous maintenance experience, ideally in painting, plumbing, tiling or carpentry in a large commercial building. Strong problem-solving, guest service and mechanical aptitude are needed, along with good English and the ability to work safely with minimal supervision.

  HVAC equipment, painting equipment

  3h

  Shift Engineer, Full-Time (Parental Leave Contract | November 2026 - February 2027)

  Vancouver, BC

  36,71 $/hSur placeContrat

  

  AccorHotel

  Candidates need previous maintenance experience, ideally in painting, plumbing, tiling or carpentry in a large commercial building. Strong problem-solving, guest service and mechanical aptitude are needed, along with good English and the ability to work safely with minimal supervision.

  HVAC equipment, painting equipment

• 3h

  Technical Sales Representative/Engineer - Shotcrete Tunnel & Mining (Timmins, ON)

  Timmins, ON

  Sur placeTemps plein

  

  Sika AG

  2+ ansCandidates need a civil, mining or geotechnical engineering degree or equivalent experience, plus 2 to 3 years of mining experience. Strong presentation, written communication and self-directed working skills are required.

  shotcrete equipment, mining equipment

  3h

  Technical Sales Representative/Engineer - Shotcrete Tunnel & Mining (Timmins, ON)

  Timmins, ON

  Sur placeTemps plein

  

  Sika AG

  2+ ansCandidates need a civil, mining or geotechnical engineering degree or equivalent experience, plus 2 to 3 years of mining experience. Strong presentation, written communication and self-directed working skills are required.

  shotcrete equipment, mining equipment

• 14h

  Shop Labourer

  Saskatoon, SK

  KG

  Kleysen Group Ltd.: With continuing global competition and rapidly-changing market conditions, "customer service"​ is often the main distinction between one company and…

  Kleysen Group needs a reliable, safety-minded person who is physically able to do the work, can work in dusty areas, confined spaces and at heights, and has their own reliable vehicle. Mechanical aptitude, forklift experience (or willingness to train) and a basic toolbox are assets.

  forklift, hand tools

13 entreprises