Electrical Technologist/Designer
Vancouver, BCTetra Tech
7+ ansCandidates need an electrical engineering technologist diploma and 7 to 15 years of electrical design experience, including Canadian Electrical Code knowledge. AutoCAD or MicroStation skills, strong organization and communication abilities, and willingness to travel are also required.
AutoCAD, MicroStation, CADWorks, Bentley Raceways
Intermediate I&C Engineer
Vancouver, BCTetra Tech
5+ ansCandidates need a bachelor's degree in instrumentation and controls or a related field, and a P.Eng. registration in BC. The posting asks for 5 to 10 years of I&C experience with PLC, DCS and HMI systems, and the ability to travel as needed.
SmartPlant Instrumentation, PLC, DCS, HMI, Schneider Modicon, Rockwell Automation/Allen-Bradley
Senior Civil Engineer
Pickering, ONTetra Tech
10+ ansCandidates need 10+ years of design experience in municipal and linear infrastructure, and a P.Eng or eligibility to register with PEO. They also need AutoCAD, Civil 3D and PCSWWM skills, strong communication, and the ability to obtain a security clearance.
AutoCAD, Civil 3D, PCSWWM
Design Engineering Lead
Tiverton, ONTetra Tech
4+ ansCandidates need an engineering degree, PEO registration or EIT status, and a valid G2 or G licence with vehicle access. Federal Security Clearance and nuclear industry knowledge are needed, and leadership and communication skills are essential.
Maximo
Electrical Designer
Pickering, ONTetra Tech
5+ ansCandidates need proficiency in Revit and Autodesk Construction Cloud, and a diploma or degree in electrical, civil or mechanical engineering or technology. Five or more years of design and drafting experience, strong written and verbal communication, and teamwork skills are needed.
Revit, Autodesk Construction Cloud, Procore, Cintoo, ETAP, Bentley Microstation
Structural Designer
Pickering, ONTetra Tech
2+ ansCandidates need proficiency in Revit and Autodesk Construction Cloud, a graduation from an accredited engineering or engineering technology program, and strong problem-solving and communication skills. Experience with structural codes, STAAD Pro and industrial design is considered an asset.
Revit, Autodesk Construction Cloud, Procore, Cintoo, STAAD Pro, Civil3D
Mechanical Designer
Pickering, ONTetra Tech
5+ ansCandidates need proficiency in Revit and Autodesk Construction Cloud, an accredited engineering or technology diploma, and strong problem-solving and communication skills. Experience with other BIM tools, STAAD Pro and a P. Eng or OACETT certification are assets.
Revit, Autodesk Construction Cloud, Procore, Cintoo, STAAD Pro, Siemens NX
Intermediate I&C Technologist
Thunder Bay, ONTetra Tech
4+ ansCandidates need a diploma in automation and instrumentation or a related technical field, and preferably 4 to 10 years of experience as an I&C technologist. Strong troubleshooting, communication, and knowledge of PLC, HMI, and DCS systems are required, and travel is expected.
AutoCAD, SPI INtools, PLC, HMI, DCS
Lead Mechanical CAD Designer
Thunder Bay, ONTetra Tech
15+ ansCandidates need a diploma in mechanical design or equivalent experience, at least 15 years of progressive heavy industrial plant design, and strong AutoCAD and 3D modelling skills. Mining experience, operational or construction experience, and willingness to travel periodically are also sought.
AutoCAD, 3D modelling software
Intermediate Electrical Engineer
Thunder Bay, ONTetra Tech
5+ ansCandidates need a bachelor's degree in electrical or electronics engineering and 5 to 8 years of relevant experience. They must be registered as a professional engineer with PEO, and experience in consulting, mining or forestry is an asset.
PLC, DCS
Senior Mechanical Engineer
Winnipeg, MBTetra Tech
10+ ansCandidates need a mechanical engineering degree, Professional Engineer status in Manitoba or eligibility for it, and at least 10 years of design experience, with consulting experience considered critical. Federal security clearance eligibility and a valid driver's licence are also required.
MS Word, MS Excel, MS PowerPoint, mechanical design software
Junior I&C Engineer (EIT)/Technologist
Vancouver, BCTetra Tech
Candidates need a degree or diploma in automation, instrumentation or a related field; new grads are welcome. Helpful assets include PLC/HMI/DCS programming, industrial network design, SCADA work, and experience with Schneider or Rockwell controllers.
AutoCAD, SPI Intools, PLC, HMI, DCS, SCADA
Electrical Designer
Mississauga, ON +4Tetra Tech
3+ ansCandidates need a diploma from an accredited electrical, civil or mechanical technology program with OACETT certification and at least 3 years of design or drafting experience. Proficiency in AutoCAD or Microstation and knowledge of the Canadian Safety Code are required.
AutoCAD, Microstation, MS Office Suite
Intermediate / Senior Project Engineer - Hydro
Mississauga, ON +4Tetra Tech
7+ ansCandidates need a bachelor's engineering degree, a P.Eng. or eligibility to register, and about 7 years of progressive experience, ideally in hydropower, dams or water resources. They also need strong coordination, tendering and communication skills.
Procurement, Documentation, Change management, Health and safety, P.Eng., Quality assurance procedures
Senior Electrical Engineer
Mississauga, ON +4Tetra Tech
10+ ansCandidates need a university degree in Electrical Engineering, over 10 years of electrical engineering experience, and strong knowledge of utility substation and distribution design. A Professional Engineer registration in Canada or the United States is preferred, along with experience in renewable energy, HVDC and 3D design software.
3D design software
Intermediate Mechanical Engineer - Hydro
Mississauga, ON +4Tetra Tech
6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.
Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection
Intermediate Mechanical Engineer - Hydro
Vancouver, BC +4Tetra Tech
6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.
Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection
Senior Substation Engineer
Mississauga, ON +4Tetra Tech
12+ ansCandidates need a university degree in electrical engineering, over 12 years of substation and medium and high voltage design experience, and a registered Professional Engineer licence in the US or Canada. Strong communication skills and experience with protection, control and metering systems are required.
3D design software
Structural Engineer (Subject Matter Expert)
Mississauga, ON +4Tetra Tech
20+ ansCandidates need a civil engineering degree with a structural specialization, a P.Eng. or PE licence, and at least 20 years of progressive structural experience, ideally in consulting. Strong expertise in power infrastructure design, codes such as CSA, AISC, ACI and ASCE, and structural analysis software is required.
STAAD.Pro, RISA, SAP2000, PLS-TOWER, LPile, MFAD
Intermediate / Senior Project Engineer - Hydro
Vancouver, BC +4Tetra Tech
7+ ansCandidates need a bachelor's engineering degree, a P.Eng. or eligibility to register, and about 7 years of progressive experience, ideally in hydropower, dams or water resources. They also need strong coordination, tendering and communication skills.
Procurement, Documentation, Change management, Health and safety, P.Eng., Quality assurance procedures
Intermediate Instrumentation and Controls Engineer
Pickering, ON +1Tetra Tech
5+ ansTetra Tech needs candidates with a preferred electrical, electronic, mechatronic or electromechanical engineering degree and P.Eng registration or eligibility. Experience with industrial instrumentation, PLCs, PID controllers and safety instrumented systems is needed, and the candidate must be able to obtain a security clearance.
PLC, schematic capture tools, BOM generation tools
Intermediate Electrical Engineer – Heavy Industrial/Nuclear
Mississauga, ON +1Tetra Tech
4+ ansCandidates need a bachelor's degree in electrical engineering, a P.Eng. in Ontario or progress toward one, and 4-8 years of electrical engineering experience in heavy industry or power generation. Knowledge of the Canadian Electrical Code, CSA and IEEE standards, and power system studies is needed, with ETAP an asset.
ETAP
Junior Electrical Engineer
Pickering, ON +1Tetra Tech
1+ ansCandidates need a university degree in electrical engineering or a related discipline, with knowledge of electrical engineering principles. Experience in nuclear, power or consulting engineering, CAD and MS Office skills, and the ability to receive security clearance are needed.
CAD software, MS Office