Emplois “schematics and drawings” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 4m

  Mechanical Designer

  Stoney Creek, ON

  Temps plein

  MS

  ML6 Search + Talent Advisory

  3+ ansMechanical or Construction Technology Diploma from a recognized post-secondary school; Must be eligible for OACETT designation; Minimum 3 years of relevant design/drafting experience in Consulting Engineering

  Project management, LEED, Design drawings, Technical support, Mechanical systems, Autodesk AutoCAD

• 2h

  Engineering Technologist

  Richmond, BC

  Temps plein

  EI

  Ebco Industries Ltd.

  Ebco Industries needs an Engineering Technologist diploma, with a preference for a mechanical or electrical engineering degree. Candidates should have hands-on electro-mechanical assembly skills, comfort with hand tools and circuits, and the ability to work independently and communicate in English.

  Hand tools, Microsoft Excel, Microsoft Word, Microsoft Outlook

• 3h

  Maintenance Technician Lead

  Toronto, ON

  Temps plein

  SM

  Samco Machinery

  5+ ansSamco Machinery needs candidates with a Millwright certificate, about 5 years of industrial equipment maintenance, and knowledge of safety codes. Strong leadership, organization, communication and the ability to read mechanical and electrical drawings are also required.

  Precision measuring tools, Dial indicator, Forklift, Crane, Scissor lift, Hand drill

  6h

  Senior Controls Engineer

  Toronto, ON

  Temps plein

  SM

  Samco Machinery

  5+ ansSamco Machinery needs candidates with an engineering or technology diploma or degree in controls, five years of electrical controls experience, and five years of PLC and HMI programming on more than one platform. Candidates also need RSLogix or Bosch Rexroth experience, AutoCAD skills, and the ability to read electrical schematics.

  RSLogix 5000, RSLogix 500, Bosch Rexroth software, Codesys, AutoCAD Electrical, AutoCAD

• 4h

  Signaling Engineer

  Ontario

  Temps plein

  MN

  Matchtech North America

  10+ ansCandidates need a bachelor's degree or higher in engineering, a P.Eng. licence with Professional Engineers Ontario (or eligibility), and at least 10 years of rail systems engineering experience. PMP certification is an asset.

  AutoCAD, MicroStation

  4h

  Test Engineer

  Alberta

  Contrat

  MN

  Matchtech North America

  4+ ansCandidates need at least 4 years of hands-on testing and commissioning experience on rail, LRT, metro or similar integrated infrastructure. They must read technical drawings and specifications, write compliant test documentation, and communicate clearly in English. An engineering degree or technologist qualification, or equivalent trade or military background, is required.

  DOORS, Jama, Polarion

• 4h

  Control System Engineer

  Saint John, NB

  Contrat

  VC

  VTEK Consultants Inc.

  8+ ansVTEK Consultants Inc. asks for a degree in electrical engineering or instrumentation and control and 8+ years of industrial instrumentation experience. Candidates need knowledge of safety instrumented systems and CSA, ISA and IEC 61511 standards, and must be able to work in operating plants.

  P&ID, loop diagrams

• 4h

  Blow Molding Service Technician - Fluent in Chinese

  Markham, ON

  Temps plein

  PA

  PET ALL MANUFACTURING INC.

  5+ ansCandidates need five or more years of hands-on blow molding experience, with strong extrusion blow molding maintenance and troubleshooting skills. They must be fluent in Chinese and English, hold a valid driver's licence and passport, and be able to travel 50% or more.

  PLC systems, schematics, technical drawings

• 4h

  Maintenance Technician

  Bolton, ON

  Temps plein

  AE

  Agrocrop Exports Ltd.

  Candidates need hands-on manufacturing experience with electrical and mechanical systems and strong troubleshooting skills. An electrician licence and PLC and HMI troubleshooting and programming skills are required, and the ability to read schematics and blueprints is needed.

  PLC, HMI, MS Word, MS Excel, MS Outlook

• 4h

  Electrical Engineering Technologist

  Red Deer, AB

  Temps plein

  EE

  Express Employment Professionals - Red Deer, AB

  Candidates need an Engineering Technologist diploma, an engineering degree or equivalent, and proven hands-on electrical troubleshooting skills. Experience with a multimeter, reading schematics, and industrial, manufacturing or automotive electrical systems is highly desirable, and AutoCAD Electrical is an asset.

  Digital multimeter, AutoCAD, AutoCAD Electrical

• 4h

  Power Generation Engineer

  Calgary, AB

  Temps plein

  JN

  Jereh North America Group

  5+ ansCandidates need a bachelor's degree in electrical engineering or a related discipline and 5+ years supporting power generation equipment. Hands-on experience with generators, switchgear, transformers, relays and controls, and the ability to read electrical drawings and speak directly with customers, are required, along with a valid driver's licence.

  Excel, Power BI

• 4h

  Panel Assembler (6-month contract position)

  Calgary, AB

  Contrat

  SE

  SFC Energy North America

  Candidates need experience in both mechanical and electrical panel assembly and an understanding of electrical safety standards. Knowledge of power tools for modifying steel enclosures and of reading electrical schematics is an asset.

  Drills, Chop saws, Jigsaws, Knockout cutters, Variable frequency drives, SCADA systems

• 5h

  Electrical Assembler

  Toronto, ON

  Temps plein

  DS

  Dawn Staffing Solutions Inc

  4+ ansCandidates need at least 4 years of electrical panel building, wiring and equipment installation experience. They must read electrical schematics and technical drawings and know the Canadian Electrical Code.

  Electrical schematics, Blueprints, BOM

• 5h

  Laser Field Service Technician (100% Travel) (35428)

  Toronto, ON

  Temps plein

  AR

  Activ8 Recruitment & Solutions

  Candidates need experience troubleshooting industrial machinery, with laser cutting experience highly preferred, plus mechanical and electrical knowledge. A valid driver's licence, comfort working at heights, the ability to lift 50 lbs and the eligibility to enter government facilities are required.

  Multimeter, Oscilloscope, Electrical schematics, Mechanical drawings

• 5h

  Electrical Designer

  Toronto, ON

  Temps plein

  N

  Neilsoft

  5+ ansCandidates need 5-7 years of electrical design experience for industrial, substation or data center projects, plus expertise in Revit MEP, AutoCAD Electrical and Navisworks. Knowledge of NEC, IEEE, NFPA and NESC standards is required.

  Autodesk Revit MEP, AutoCAD, AutoCAD Electrical, Navisworks, CYME, ETAP

• 5h

  Electrical Inspector

  British Columbia

  Contrat

  CP

  Contract Professionals Canada Inc.

  10+ ansCandidates need a Red Seal journeyperson electrician, 10+ years of electrical experience in oil and gas or heavy industrial construction, and at least 3 years in inspection or QA/QC. They also need knowledge of the Canadian Electrical Code, safety tickets, and a valid Class 5 licence.

  Megger, Microsoft Office, Procore, WinPCS, ProjectWise

• 5h

  Industrial Pump Repairer

  Burlington, ON

  Temps plein

  IP

  Industrial Pump Repair Canada

  3+ ansCandidates need at least 3 years of experience in industrial pump repair or a related mechanical field, plus a college or technical program in mechanical engineering or mechanical technology, or equivalent experience. The work is physically demanding, with heavy lifting, long periods standing and frequent bending, crouching and kneeling.

  hydraulic press, pullers, grinders, torque tools

• 5h

  Senior Electrical Designer

  Toronto, ON

  Temps plein

  ER

  Expand Reach Inc.

  10+ ansCandidates need an engineering degree, undergraduate degree, or college diploma in electrical engineering or technology, plus 10 years of electrical controls experience. Expand Reach Inc. expects hands-on PLC and HMI programming across several platforms and strong AutoCAD and troubleshooting skills.

  RSLogix 5000, RSLogix 500, Siemens STEP 7, AutoCAD Electrical, multimeter, oscilloscope

• 5h

  Maintenance Electrician

  London, ON

  Temps plein

  CE

  Canadian Executive Search Group (USA) Inc / Division of Arrow Group of Companies

  Candidates need industrial electrical maintenance experience and the ability to troubleshoot equipment and read schematics. A 442A certification is preferred for the top rate, and a 309A may be considered; apprentices with manufacturing experience are encouraged.

  electrical schematics, industrial machinery

• 5h

  Junior Designer/Intern Architect

  Toronto, ON

  Temps plein

  PR

  Paul Raff Studio

  2+ ansCandidates need an accredited university degree in architecture and fluency in Revit, AutoCAD, SketchUp and Adobe. Strong written and verbal communication, good organization and the ability to work both on a team and independently are also required.

  Revit, AutoCAD, SketchUp, Adobe

• 6h

  Millwright Mechanic

  Toronto, ON

  Temps plein

  CS

  Circles & Squares Bakery

  4+ ansCandidates need an Ontario 433A millwright certificate (Red Seal preferred) and at least four years of industrial mechanical experience. They must know power transmission, pneumatics, hydraulics, electrical troubleshooting, PLCs, machine-shop work, and ARC, TIG, and MIG welding, and be able to lift 50 lbs and climb ladders.

  lathe, milling machine, welding equipment, blueprints, hand tools, power tools

• 6h

  Mechanical Engineering Technologist

  Alliston, ON

  Temps plein

  HO

  Honda of Canada Mfg.

  Honda of Canada Mfg. needs candidates with a post-secondary diploma or degree in mechanical, manufacturing, industrial or mechatronics engineering technology, plus hands-on automation troubleshooting and project management experience. Candidates also need CATIA, AutoCAD and Microsoft Office skills, and a valid G Class driver's licence.

  Catia, AutoCAD, Microsoft Excel, Microsoft PowerPoint, MS Project, Smartsheet

• 6h

  Engineering Technician (Semiconductor Manufacturing)

  Halifax, NS

  Temps plein

  I

  Inpho

  3+ ansCandidates need an associate degree in engineering technology, electronics or mechanical engineering, or equivalent experience. They must have 3+ years of hands-on mechanical, electrical or electromechanical work, and be able to read drawings and use measurement tools.

  Calipers, Multimeter, Oscilloscope, CAD software, PLC

• 7h

  Journeyperson/Third Year Electrician

  St. Stephen, NB

  Temps plein

  SE

  Southwest Electric & Security Inc

  Candidates need a Journeyperson Electrician licence or a registered third-year electrical apprenticeship, plus the ability to work independently. Strong troubleshooting, communication and organizational skills are required, and a valid driver's licence with reliable transportation is needed. Leading crews and industrial electrical experience are assets.

  Journeyperson, Work independently, Troubleshooting, Problem solving, Valid driver's licence, Organizational skills

22 entreprises