Emplois “underground equipment” au Canada – Page 15

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 9j

  Excavator Operator - Construction

  Edmonton, AB

  Sur placeTemps plein

  BC

  Blackline Civil

  2+ ansCandidates need at least 2 years of excavator experience in underground or civil construction, including work around live utilities. They must understand trench safety, read grade stakes, plans and utility drawings, hold a valid driver's licence and have a ground disturbance certification.

  excavator

  9j

  Civil Estimator

  Edmonton, AB

  Sur placeTemps plein

  BC

  Blackline Civil

  5+ ansCandidates need 5+ years of civil estimating experience, ideally senior-level, with underground utilities, earthworks and land development. They must understand construction methods, read drawings and specifications, and use estimating software and Excel.

  Excel, estimating software

  9j

  Class 1 Driver Needed

  Edmonton, AB

  Sur placeTemps plein

  BC

  Blackline Civil

  3+ ansCandidates need a valid Class 1 licence, at least 3 years of driving experience (civil or construction preferred), and a clean 3-year commercial driver's abstract. Experience with 18-speed manual transmissions and comfort with long, varying hours are also needed.

  tandem truck, Kenworth truck

  9j

  Labourer - Construction

  Edmonton, AB

  Sur placeTemps plein

  BC

  Blackline Civil

  Candidates need previous construction or labour experience and the ability to do physically demanding work outdoors in all weather. They must follow directions, work well in a team and be reliable.

  Shovels, Tampers, Saws

• 9j

  Electrical Engineer

  Windsor, ON

  Temps plein

  

  Dillon Consulting Limited: Dillon is a proudly Canadian, employee-owned, professional consulting firm with over 1,100 employees specializing in planning, engineering,…

  8+ ansCandidates need an electrical engineering degree from an accredited university, a professional engineer licence or eligibility within six months, and at least 8 years of related experience with 3 to 5 years in facilities electrical design. Strong design, code compliance, project management and communication skills are essential.

  9j

  Electrical Engineer

  Kingston, ON +10

  Temps plein

  

  Dillon Consulting Limited: Dillon is a proudly Canadian, employee-owned, professional consulting firm with over 1,100 employees specializing in planning, engineering,…

  10+ ansCandidates need a degree in electrical engineering, a professional engineer licence or eligibility within six months, and ten or more years of experience designing low and medium voltage electrical systems. They should also have project management, code compliance and team leadership experience, plus strong communication skills.

• 9j

  Electrical Design Coordinator

  Toronto, ON

  Sur placeTemps plein

  OT

  Ontario Transit Group

  3+ ansCandidates need a bachelor's degree in electrical engineering (master's preferred) and at least 3 years of detailed design experience on building or civil infrastructure projects. Knowledge of building design and Autodesk software such as Civil 3D, AutoCAD, Revit and BIM360 is required.

  Autodesk Civil 3D, AutoCAD, Revit, Autodesk Construction Cloud, BIM360

• 9j

  Year-round Operator, Highway Maintenance (Grande Prairie)

  Clairmont, AB

  27,25–31,75 $/hTemps plein

  LH

  Ledcor Highways Ltd.

  Candidates need a valid Class 1, 2 or 3 driver's licence with air endorsement, a clear 3-year driver's abstract, and successful pre-employment drug and alcohol testing. They must be able to do physically demanding work, including lifting up to 50 lbs. Prior snowplow or wheel loader experience is a strong asset, but training is provided.

  snowplow truck, wheel loader, heavy equipment, tow plow unit

• 10j

  Coordinator Production

  Red Lake, ON

  

  Evolution Mining Limited

  Candidates need an Ontario Secondary School Diploma or equivalent and Ontario Basic Hard Rock Miner training, plus strong underground production mining and planning experience. Evolution Mining also looks for Deswik or similar planning software skills and strong Microsoft Office and analytical skills.

  Deswik, Microsoft Excel, Microsoft Outlook, Microsoft Word, Microsoft PowerPoint

• 10j

  Grader Operator - Reclamation

  Fort MacKay, AB +5

  Temps plein

  LC

  Ledcor CMI Ltd.

  3+ ansCandidates need at least 3 years of CAT 16M or 16H grader experience, ideally in active mine or construction sites with heavy haul traffic. Strong rough grading and earthworks skills, knowledge of mine-site traffic and haul road safety, and the ability to read site plans and grade stakes are needed.

  CAT 16M grader, CAT 16H grader

  10j

  Equipment Operator - Reclamation

  Fort MacKay, AB +4

  Temps plein

  LC

  Ledcor CMI Ltd.

  3+ ansCandidates need 3+ years operating large excavators and/or dozers, with road building, reclamation or mining experience preferred. Ground Disturbance Level 2, CSTS 09 or a safety orientation, a valid driver's licence and pre-access drug and alcohol testing are required.

  excavator, dozer, grader, water truck, roller packer, GPS machine control system

• 11j

  Assayer, fire

  Kitimat, BC

  38,42 $/h

  NG

  Newmont Goldcorp Canada

  Candidates need a high school diploma and laboratory or technical experience, plus basic chemistry or mineral processing knowledge. They must be safety-minded, detail-oriented, able to lift up to 50 lbs, and comfortable working 12-hour shifts.

  Fire assay equipment, Laboratory equipment

  11j

  Fuel lube truck operator

  Kitimat, BC

  48,73 $/h

  NG

  Newmont Goldcorp Canada

  Candidates need experience in an underground mining environment, a strong mechanical aptitude with lubrication systems and mobile equipment, and a commitment to safe work practices. They must be able to lift up to 50 lbs and work 12-hour rotational shifts at a remote site.

  fuel and lube truck

• 12j

  General Labourer

  Anzac, AB

  

  Regional Municipality of Wood Buffalo

  1+ ansCandidates need a high school diploma or GED, one year of related labourer experience, and a valid Class 5 operator's licence plus a criminal record check. They must be able to work outdoors in all weather, handle manual labour for long periods, and work rotating shifts including holidays, nights and weekends.

  Skidsteer, Toolcat, Hand tools, Power tools, Small utility vehicles

  12j

  Instrumentation Technician

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  3+ ansCandidates need a Certified Journeyperson in Instrumentation with three years of journeyperson experience, plus a high school diploma or GED. A valid Class 5 operator's licence and a criminal record check are required, along with the ability to work outdoors in all conditions.

  oscilloscope, multimeter, frequency meter, signal generator, tone generator, SCADA

  12j

  Electrician

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  3+ ansCandidates need a Certified Journeyperson Electrician ticket, three years of commercial or industrial electrical experience, and strong knowledge of the Canadian Electrical Code. A high school diploma or GED, a valid Class 5 licence, and the ability to obtain an RCMP enhanced reliability clearance are also required.

  PLC, VFD, MCC, SCADA, Microsoft Excel, Microsoft Word

  12j

  Foreperson, Water Treatment Operations

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  5+ ans2+ gestionCandidates need an Alberta Environment and Protected Areas Water Treatment Certification Level III, five years of water treatment experience in a level IV facility, and two years of operational leadership with record-keeping and reporting experience. A valid Class 5 licence, a criminal record check, and willingness to work rotating shifts, holidays and in all weather are also required.

  LCA5, Zetasizer, Microsoft Excel, Microsoft Word, Microsoft Outlook, mobile equipment

  12j

  Millwright

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  3+ ansCandidates need a Certified Journeyperson Millwright credential, high school diploma or GED, and three years of journeyperson experience in a commercial or industrial setting. A valid Class 5 licence, a criminal record check, and the ability to work outdoors in all conditions are also required.

  hand tools, power tools, hoists, lifting devices

• 12j

  Facility Preservation Engineer – Civil

  Grande Prairie, AB

  GC

  Global Cellulose Fibers

  8+ ansCandidates need a civil engineering degree, a P.Eng. (or ability to obtain APEGA membership), 8 to 10 years of industrial or maintenance experience, and knowledge of structures, underground piping, soil properties and building systems. Strong AutoCAD, design code and communication skills are required.

  AutoCAD, SAP

• 12j

  Assayer, Fire

  British Columbia

  38,42 $/hTemps plein

  

  Newmont Mining Corporation: Newmont is the world’s leading gold company and a producer of copper, silver, zinc and lead.

  Candidates need a high school diploma and lab, mineral processing or technical experience. They also need basic chemistry knowledge, a strong safety focus, basic computer skills and the ability to lift up to 50 lbs over 12-hour shifts.

  Laboratory equipment, Balance

  12j

  Fuel Lube Truck Operator

  British Columbia

  48,73 $/hTemps plein

  

  Newmont Mining Corporation: Newmont is the world’s leading gold company and a producer of copper, silver, zinc and lead.

  Candidates need prior underground mining experience, a strong commitment to safe work practices, and good mechanical aptitude with lubrication systems and mobile equipment. They must be able to lift up to 50 lbs, work independently and in a team, and accept 12-hour rotational shifts at a remote site.

  fuel and lube truck, lubrication equipment

• 12j

  Civil Estimator

  Mississauga, ON +1

  85k–110k $/anTemps plein

  

  Hays

  6+ ansCandidates need a bachelor's degree in civil engineering or a related discipline, or trade experience, plus 6 or more years of construction cost estimating. They need civil project experience, knowledge of bid preparation and delivery methods, and skills in estimating software and Microsoft Office.

  Microsoft Office Suite, Estimating software

• 12j

  Project Manager

  Saskatoon, SK

  

  ERCO Worldwide

  6+ ansCandidates need a college diploma in engineering technology, 6-10 years of project management and manufacturing process experience, and a strong health and safety mindset. Project management and Lean Manufacturing certifications and a multi-discipline engineering degree are preferred.

  P&ID drawings, Management of Change system

• 12j

  Assembler - 2nd Shift

  Edmonton, AB

  Sur place

  

  Mattr

  Candidates need a high school diploma or equivalent and good verbal and written English. Experience is not required, but fiberglass manufacturing experience is preferred. They must read blueprints, do basic math, and handle medium physical work.

  grinders, trimmers, measuring tools, rollers, hand tools

13 entreprises