Emplois “medical gas equipment” au Canada – Page 17

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 26j

  Plumber - BC Children's Hospital & BC Women's Health Centre

  Vancouver, BC

  Temps plein

  

  PHSA - Provincial Health Services Authority

  2+ ansCandidates need a BC journeyman plumber certificate, a BC Class B gas fitter's licence and a Cross Connection Control Specialist certificate, plus Grade 10 and two years of related experience. Strong blueprint reading and Indigenous cultural safety knowledge are also expected.

  Deadweight testers, Water columns, Mercury manometers, Differential gauges

  26j

  Pulmonary Function Therapist, Pulmonary Function Lab - BC Children’s Hospital

  Vancouver, BC

  37,89–47,31 $/hÀ la journée, Temps partiel

  

  PHSA - Provincial Health Services Authority

  1+ ansCandidates need graduation from an accredited respiratory therapy program, passing the Canadian Board of Respiratory Care exam, current CPR certification, and at least one year of recent pediatric pulmonary function experience. Strong knowledge of Indigenous health, cultural safety and anti-racism is also required.

  Impulse oscillometry system, Calibration syringes, Peak flowmeter

  27j

  Pulmonary Function Therapist, Pulmonary Function Lab - BC Children’s Hospital

  Vancouver, BC

  37,89–47,31 $/hÀ la journée, Temps partiel

  

  PHSA - Provincial Health Services Authority

  1+ ansCandidates need graduation from an accredited respiratory therapy school, passing the Canadian Board of Respiratory Care exam, and current CPR certification. They also need at least one year of recent pediatric pulmonary function experience and knowledge of Indigenous cultural safety and anti-racism.

  Calibration syringes, Gas analysis equipment, Impulse oscillometry equipment, Peak flowmeter

  27j

  Respiratory Therapist, Neonatal Intensive Care Unit (NICU) - BC Women’s Hospital & Health Centre

  Vancouver, BC

  37,89–47,31 $/hTemps plein

  

  PHSA - Provincial Health Services Authority

  Candidates need a respiratory therapy diploma from an accredited school, passing the Canadian Board of Respiratory Care exam, and current BCSRT and CSRT registration. They also need current Basic Life Support and Neonatal Resuscitation Program certification, plus knowledge of Indigenous health, cultural safety and the related legislation.

  Respiratory equipment

  27j

  Respiratory Therapist, Pediatric Intensive Care Unit (PICU) - BC Children’s Hospital

  Vancouver, BC

  37,89–47,31 $/hTemps plein

  

  PHSA - Provincial Health Services Authority

  Candidates need a respiratory therapy diploma from an accredited school, passing the Canadian Board of Respiratory Care exam and current registration with the BCSRT and CSRT. Current Basic Life Support and Neonatal Resuscitation Program certifications are also required.

  Respiratory equipment, Cardio-pulmonary monitoring equipment

• 26j

  Power Generation Technician

  Brampton, ON

  45–55 $/h

  T

  TalentSphere

  4+ ansCandidates need Journeyman HET or Journeyman Electrician certification and 4 to 7 years of hands-on experience with diesel or natural gas generators and compressors. They must also have a valid driver's licence, a passport, the ability to lift 50 lbs and a high school diploma or GED.

  Schematics, Diesel generators, Natural gas engines

• 27j

  Ingénieur(e) en conception de logiciels de systèmes de commande / Control Systems Software Design Engineer

  Mississauga, ON +1

  Temps plein

  

  RTX

  5+ ansBaccalauréat en génie ou en informatique; Au moins 5 ans d'expérience en systèmes de commande ou embarqués essentiels à la sécurité; Expérience avec la norme DO-178 ou similaire

  Ada, C/C++, Assembly

  27j

  Ingénieur(e) certification logicielle - systèmes de contrôle (DO-178C) / Control Systems Software Certification Engineer (DO-178C)

  Longueuil, QC

  Temps plein

  

  RTX

  5+ ansBaccalauréat en génie mécanique, électrique, logiciel, informatique ou aérospatial; Minimum de 5 ans d'expérience en systèmes de contrôle ou avionique; Bonne connaissance de la norme DO-178C (ou ISO 26262)

  Assembleur, Ada, C/C++, VAX, GPU

• 27j

  Heavy Duty Mechanic

  North Battleford, SK

  37,98 $/hContrat, Temporaire

  

  adecco

  Candidates need a heavy-duty mechanic diploma or related trade training, a valid driver's licence and hands-on experience with diesel, hydraulic and electrical systems. They must be at least 18, able to lift 50 lbs, work at heights up to 60 feet and provide their own tools.

  welding equipment, diagnostic equipment, repair tools

• 27j

  Bussing Logistics Coordinator

  Edmonton, AB

  Temps plein

  

  Kiewit: With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and…

  Kiewit needs candidates with transportation, fleet, logistics or dispatch experience, strong communication skills and advanced Excel for tracking and reporting data. Candidates must be organized, comply with site safety rules, have reliable transportation to site and work well in a fast-paced construction setting.

  Excel, Microsoft Office

  27j

  Supplier Quality Manager

  Vancouver, BC +2

  134k–140k $/anTemps plein

  

  Kiewit: With its roots dating back to 1884, the employee-owned organization operates through a network of subsidiaries in the United States, Canada, and…

  5+ ansCandidates need a bachelor's degree in engineering or a related field with 5+ years of supplier quality experience, or an associate's degree with 10 years. Knowledge of welding, NDE, ASME codes, coatings and industry standards such as NACE, ASME, AWS and ISO is required, along with experience in oil and gas, power, water or heavy manufacturing.

  Procurement, Heavy equipment operation, Inspection, Test materials, Project management, Welding

• 27j

  Plant Technician

  Maitland, ON

  25 $/hTemps plein

  AR

  AIRGAS Red-D-Arc Limited

  Candidates need a high school diploma or equivalent, a strong mechanical aptitude and hands-on repair skills, and experience or familiarity with Gas Chromatography (GC) and lab procedures. They must be able to work 12-hour rotating shifts in all weather and wear full PPE.

  Gas Chromatography (GC) equipment, Detector tubes, Analytical instruments

• 27j

  Geomatics/Surveyor Technician

  Mississauga, ON

  70k–90k $/anTemps plein

  

  Maple Reinders: Maple Reinders is a full-service construction services provider that specializes in ICI building (industrial, commercial and institutional); and…

  3+ ansCandidates need a technical diploma, three or more years of surveying experience, and skill with AutoCAD, Civil 3D and Bluebeam. They also need a valid G driver's licence, willingness to travel, and the ability to work safely on active construction sites.

  AutoCAD, Civil 3D, Bluebeam, Microsoft Excel, Microsoft Word, Microsoft Outlook

• 27j

  Indigenous Frac Operator

  Red Deer, AB

  Temps plein

  

  Grizzlytrek Group: "Technical & Indigenous Staffing Company"

  3+ ansCandidates need a Class 5 licence minimum (Class 3 or 1 also accepted), at least 3 years of driving experience, fewer than 6 demerits, and the ability to lift 50 lbs and pass a medical fit test. Indigenous identity and living within 80 km of Red Deer are required.

  manual transmission vehicle, PPE

• 28j

  Mechanical Designer

  Toronto, ON

  Sur placeTemps plein

  IN

  Intero North America

  4+ ansCandidates need at least four years of mechanical engineering experience, two of them in oil and gas, automotive, medical or aerospace. They also need a bachelor's degree in mechanical or mechatronics engineering, strong SolidWorks skills and good communication skills.

  SolidWorks

  28j

  Quality Engineer

  Toronto, ON

  Sur placeTemps plein

  IN

  Intero North America

  5+ ansCandidates need a bachelor's degree in engineering or a related field and at least 5 years in quality engineering and ISO management systems, including 2 years leading cross-functional improvement. Hands-on experience with FMEA, Lean, Six Sigma, NCR/CAPA and small-series complex technical products is required.

  Power BI, ERP system, QA/QC software, QMS software

• 28j

  Primary Worker / Kimisinaw (CX-02): Correctional Officer II

  Edmonton, AB +5

  CS

  Correctional Service Canada

  Candidates need enhanced reliability clearance, an unrestricted driver's licence, and completion of the Correctional Training Program and Women Centered Training. Strong communication, security judgment and willingness to work shifts, weekends and statutory holidays are expected.

  Vehicle

  28j

  Make a difference! Become a Correctional Officer I

  Drumheller, AB +23

  CS

  Correctional Service Canada

  Candidates need Enhanced Reliability Status, a valid unrestricted driver's licence, and successful completion of the Correctional Training Program. They must be able to work shifts, weekends and holidays, and communicate and build professional relationships.

  safety equipment

  28j

  Correctional Officer II - Healing Lodges (CX-02)

  Maskwacis, AB +1

  CS

  Correctional Service Canada

  Candidates need an understanding of Indigenous life, strong communication and documentation skills, and the ability to work shifts. They must hold Enhanced Reliability Status, a valid unrestricted driver's licence, pass a Health Canada medical evaluation, and complete the Correctional Training Program.

  Case management, Collaboration, Document evidence, Decision making, CSC, First Aid

• 28j

  Heavy Equipment Finish Operator (Dozer D9 - D11) (Kearl)

  Fort McMurray, AB

  Temporaire

  NA

  North American Construction Group

  3+ ansCandidates need at least 3 years as a finish dozer operator on civil projects, with D3 to D8 or larger dozer experience, and experience on muskeg and wet ground, road building, pipe backfilling and truck spotting. A Class 5 driver's licence, a CSO certification, strong English and a safety-first attitude are also required.

  Dozer, Stakes

• 28j

  Heavy Equipment Finish Operator (Dozer D9 - D11) (Kearl)

  Fort McMurray, AB

  Temporaire

  

  North American Construction Group Inc.: North American Construction Group provides a wide range of mining and heavy construction services to customers in the resource development and…

  3+ ansNorth American Construction Group needs candidates with at least 3 years as a finish dozer operator on civil projects and D3 to D8 or larger experience. Soft ground, road building, pipe backfilling and truck spotting experience are required, and a valid Class 5 driver's licence and CSO certification are needed.

  dozer, D9

• 28j

  Inside Sales Representative

  Grande Prairie, AB

  Temps plein

  EH

  Elevation HR

  4+ ansCandidates need a high school diploma, a valid Class 5 licence with a clean driver's abstract, 4 years of oil and gas experience, and strong communication and Microsoft Office skills. Post-secondary business education and sales experience are preferred.

  Microsoft Office, Computers, Phones

• 28j

  DCS And Automation Engineer

  Télétravail au Canada

  TélétravailTemps plein

  

  Intersect

  10+ ansCandidates need a bachelor's degree in an technical engineering discipline and 10+ years of control systems or plant automation experience. Strong knowledge of DCS platforms, PLCs, industrial protocols and control engineering documentation is required.

  DCS, PLC, SCADA, HMI, Historian

• 28j

  Heavy Equipment Mechanic

  London, ON

  27–30 $/h

  

  STRIVE Recruitment: STRIVE is a specialist recruitment firm offering proactive recruitment solutions in the areas of Accounting & Finance, Corporate Administration,…

  3+ ansCandidates need at least 3 years repairing heavy construction equipment and strong troubleshooting skills for mechanical, hydraulic, electrical and engine work. Experience with earth-moving or aerial lift equipment is preferred, along with comfort using computers and diagnostic software.

  diagnostic software, forklift, aerial lift, compaction equipment, earth-moving equipment

15 entreprises