Aucun filtre correspondant. Essayez un autre nom.
Encore Global: A leading global event production company with unmatched technical expertise and a hospitality-first approach.
2+ ansCandidates need a high school diploma or equivalent, 500+ hours of onsite rigging experience, Basic Rigging and lift certifications, and lift and ground rigging experience. Supervising a rigging team is preferred.
Motors, Truss, Personnel lifts, Cable picks
Amsted Rail Company
5+ ansCandidates need at least 5 years of experience in maintenance planning, supervision, project management, reliability or industrial maintenance. They need strong knowledge of mechanical, hydraulic and pneumatic systems, the ability to read technical drawings, and experience with CMMS software such as SAP.
SAP, Maintenance Connection, Microsoft Excel, Microsoft Outlook, Microsoft Project
Amsted Canada
5+ ansCandidates need a technical diploma or trade certification, at least five years in maintenance planning or project management, and experience reading mechanical and hydraulic drawings. Experience with CMMS systems such as SAP and Maintenance Connection is required, with PMP or CMRP certification preferred.
SAP, Maintenance Connection, Microsoft Excel, Microsoft Outlook, Microsoft Project, CMMS
KF Aerospace
Candidates need a valid Transport Canada AME-M1 licence, willingness to get a type endorsement, Grade 12 or higher, and the ability to get an Enhanced Reliability Clearance. They also need to travel by air at short notice, work evening shifts, and communicate well in writing and speech.
ground equipment, test tools, run-up equipment
DIRTT Environmental Solutions
2+ ansCandidates need a valid Journeyman Millwright certificate or Interprovincial Red Seal, two years of CNC and metal equipment troubleshooting experience, and a Class 5 driver's licence. Strong knowledge of pneumatics, hydraulics, bearings, gearboxes and conveyors is required, and five or more years in manufacturing maintenance is preferred.
CMMS, CNC machinery, PLC
Well Initiatives Limited
1+ ansCandidates need at least one year of water well or environmental consulting experience and familiarity with Ontario's Water Well Act Regulation 903. A valid class G Ontario licence with a clean driver's abstract is required, and mechanical aptitude and Excel or GIS skills are assets.
Excel, AutoCAD, GIS, drill rigs, geophysical logging tools, heavy equipment
Brandt in Canada
Candidates need foundational mechanical and technical aptitude, a strong commitment to safety, and good customer service skills. A valid driver's licence and the ability to work shifts are required, and John Deere or heavy equipment experience and a journeyperson certification are assets.
testing instruments, rigging equipment, welding equipment, pressure washers, hand and power tools
Brandt in Canada
Candidates need foundational mechanical and technical aptitude, a strong commitment to safety, and good customer service skills. A valid driver's licence and the ability to work shifts are required, and John Deere or heavy equipment experience and a journeyperson certification are assets.
testing instruments, rigging equipment, welding equipment, pressure washers, hand and power tools
Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…
2+ ansCandidates need at least 2 years of Oil and Gas industry experience, the ability to troubleshoot independently and work on a team, and clear client communication by phone or email. A valid forklift ticket, a valid Class 5 licence with a clean driver's abstract, and local residence or willingness to relocate to Fort St. John are also required.
Forklift, Small crane, Service truck
Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…
2+ ansCandidates need at least 2 years of oil and gas industry experience and the ability to work alone or in a team. A valid forklift ticket, a valid Class 5 licence with a clean driver abstract, and hoisting and rigging training are required, and pressure testing experience is preferred.
forklift, small crane, pressure testing equipment
Alberici Canada
3+ ansAlberici Canada needs candidates with 3-5 years of health and safety experience on complex construction sites, plus JHSC Part 1 and Part 2 certification. Candidates should know OHSA, Regulation 213/91 and CSA standards, and have experience with COR programs and high-risk work.
Procore, Smartsheet, Excel
McKay Metis Group
Candidates need a trade certificate and a valid driver's licence, with a CVIP licence an asset. Experience diagnosing and repairing heavy-duty equipment, drivetrains and air brake systems is expected.
computerized test equipment, engine diagnostic equipment, calibration devices
Forum Energy Technologies: FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries.
3+ ansCandidates need at least 3 years of welding experience, strong semi-automatic GMAW skills, and the ability to read drawings and weld procedures in English. Grade 12 or equivalent is required, and an apprentice welder registration is preferred.
GMAW welding equipment, Angle grinder, Calipers, Rulers, Overhead crane
Forum Energy Technologies: FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries.
5+ ansCandidates need 5+ years maintaining manufacturing equipment and mechanical repair experience, plus overhead crane and rigging experience. A Journeyperson Millwright certification or registered apprenticeship is preferred. Candidates must lift up to 45 lbs and work well under pressure.
CMMS, PLC, CNC, overhead crane, forklift, precision measuring tools
Forum Energy Technologies: FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries.
2+ ansCandidates need 2+ years maintaining manufacturing equipment and mechanical repair experience across machine types. Registered apprenticeship is preferred, and overhead crane or rigging experience is an asset.
CMMS, PLC, CNC, overhead crane, forklift, precision measuring tools
Vuteq Canada Inc.
2+ ansCandidates need a valid Maintenance Millwright 443A certificate of qualification and at least two years of practical experience. Knowledge of hydraulics, pneumatics and electricity is an asset, along with WHMIS training and a valid driver's licence.
Lathes, Milling machines, Precision measuring tools, Hand and power tools
West Fraser: West Fraser is a diversified wood products company with facilities in Canada, the U.S., the U.K.
3+ ansCandidates need a fully certified Red Seal Electrician with at least three years of industrial electrical experience, ideally in forest products. Strong safety commitment, planning and communication skills, and computer skills are required.
PLC, HMI, conveyor systems, hoisting and rigging equipment
SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…
3+ ansCandidates need a high school diploma, a valid Class 5 driver's licence, and at least 3 to 5 years of DTH drilling experience in an open-pit mine. Strong mechanical aptitude and the ability to work rotating shifts in remote, weather-exposed conditions are also required.
Sandvik DTH rig, Excavator-mounted drill, GPS equipment, Surveying tools
Braya Renewable Fuels: Braya Renewable Fuels owns and operates the Come By Chance Refinery, located in Newfoundland and Labrador, and has converted it to renewable fuel…
Candidates need a certified Journeyperson Boilermaker credential, with Red Seal preferred, and apprentices may apply. They need pressure-system experience with codes such as ASME Section VIII, a valid driver's licence, and safety certifications including Confined Space, Fall Arrest, Powerline Hazard and WHMIS.
hand tools, ladders, scaffolding
18 entreprises