Emplois “Manual air tools” au Canada – Page 2

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 53m

  Truck Technician (Licensed) — Weekend Shift, Heavy-Duty Fleet | Winnipeg, MB

  Winnipeg, MB

  Temps plein

  TW

  TAPP Workforce Solutions Inc.

  3+ ansCandidates need Red Seal or inter-provincial truck technician certification (preferred), a Manitoba CVIP licence, a valid driver's licence with air brake certification, and 3 to 7 years of in-shop heavy-duty experience. Level 2 Truck and Transport training is the minimum for unlicensed candidates, and they must be available for weekend shifts and legally eligible to work in Canada.

  JPRO, forklift

• 53m

  26-180 Equipment Operator 4a

  Maple Ridge, BC

  Temps plein

  CO

  City of Maple Ridge

  Candidates need Grade 12 and considerable experience operating and servicing heavy construction equipment, or an equivalent mix of training and experience. A BC Class 3 driver's licence with air brake endorsement is required, along with mechanical aptitude and physical endurance.

  rubber-tired hydraulic backhoe, industrial or farm-type tractor, flail mower, hand tools for servicing

• 53m

  Millwright

  Exshaw, AB

  Temps plein

  G

  Graymont

  Candidates need proven preventive maintenance and repair experience on industrial equipment, strong mechanical troubleshooting skills and safe use of hand and power tools. A trade certification or journeyperson Millwright status is preferred, and experience in heavy industry, mining, cement or lime production is an asset.

  Hand tools, Power tools

• 55m

  General Labourer

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  1+ ansCandidates need a high school diploma or GED, at least one year of related labourer experience, and a valid Class 5 licence. They must be able to work outdoors in all weather, follow written and verbal instructions, and pass a criminal record check.

  skidsteer, Toolcat, hand tools, power tools, collection truck

• 57m

  Building Automation Systems Installation Technician

  York, ON

  Temps plein

  G

  GoodWork.ca

  2+ ansWatershed Technologies Inc. needs 2 to 3 years of hands-on installation experience with building automation, HVAC controls, low-voltage or electrical field work. Candidates should read electrical drawings and wiring diagrams, hold WHMIS 2015 and be able to work at heights, with a valid Ontario driver's licence and own transportation.

  electrical testing equipment, ladders, BACnet network tools

• 57m

  Production Technician - PM Shift - Wed-Sat/Thurs-Sat - 7:00pm - 7:00am - $23.17 + $1.50* - Golden West Baking Company

  Delta, BC

  Temps plein

  CG

  C.H. Guenther

  Candidates need a high school diploma or equivalent, good communication skills, and the ability to lift 25 kg and to work in a warm, fast-paced, high-pressure food plant environment.

  Metal detector, Packaging machines, Conveyors, Air divider

• 1h

  Grinder - Evening Shift

  Mirabel, QC

  Temps plein

  

  Safran

  Candidates need a high school diploma (equivalence certificates are not accepted), manufacturing or manual work experience, and good manual dexterity. Grinding experience, blueprint reading, use of calipers and micrometers, and basic computer skills are assets, along with precision, attention to quality and autonomy.

  Manual air tools, Semi-automatic grinding equipment, Calipers, Micrometers

  1h

  Sandblasting Operator - Night Shift

  Mirabel, QC

  Temps plein

  

  Safran

  Candidates need a high school diploma, hands-on manufacturing experience and attention to detail. Experience with automated equipment, basic computer skills and physical strength are needed, and the operator must work in a full-body suit with an oxygen-supplied helmet.

  sandblasting machine, lifting devices, manual blasting equipment

  1h

  Adjuster-Assembler (Honing-Finishing Operator) - Day Weekend Shift

  Mirabel, QC

  Temps plein

  

  Safran

  Candidates need a DEP in aircraft structure assembly or a DES with relevant experience, hands-on work with pneumatic tools in manufacturing, and the ability to read mechanical drawings and use calipers and micrometers. Attention to detail, basic computer skills and good communication are also expected.

  pneumatic tools, lathe, calipers, micrometers

• 1h

  HVAC Service Technician

  Kitchener, ON

  Temps plein

  MF

  Merit for Training

  Candidates need a Red Seal Trade qualification and preferably prior HVAC service, installation or maintenance experience. Strong mechanical knowledge, troubleshooting skills and the ability to read technical documents are important.

  hand tools, power tools, schematics, equipment manuals

• 1h

  HVAC Service Technician

  Kitchener, ON

  Temps plein

  MF

  Merit for Apprenticeship

  Candidates need a Red Seal trade qualification and HVAC service, installation or maintenance experience is preferred. Strong mechanical knowledge, troubleshooting skills and the ability to read schematics are important, and boiler, plumbing or welding experience is a plus.

  hand tools, power tools, schematics, equipment manuals

• 1h

  Aircraft Technical Project Manager

  Breslau, ON

  Temps plein

  DH

  De Havilland Aircraft of Canada Limited

  10+ ansCandidates need a current AME "E" Transport Canada licence, at least 10 years of technical experience, and experience leading teams. They should have broad troubleshooting skills on electrical, navigation, communication and flight control systems; experience on DHC-8 or CL-415/215 aircraft is an asset.

  Project data tracking tools

• 1h

  Automotive Service Technician

  Surrey, BC

  38–50 $/h

  

  The Jim Pattison Auto Group

  Candidates need previous automotive technician experience, a Red Seal certification or working toward it, and a valid BC driver's licence with a satisfactory driver's abstract. Strong diagnostic skills and the ability to drive manual and automatic vehicles are also required.

  Air tools, Hoists, Diagnostic equipment

  1h

  Automotive Service Technician - North Vancouver

  North Vancouver, BC

  

  The Jim Pattison Auto Group

  Candidates need previous automotive technician experience, with dealership experience highly preferred, and a Red Seal certification or be in the process of challenging it. A valid BC driver's licence with a satisfactory driver's abstract is required, along with strong diagnostic skills, the ability to lift up to 60 pounds and stand for long periods.

  diagnostic equipment, hoists, air tools

• 3h

  HVAC/R Technician

  Bowen Island, BC

  Temps plein

  AC

  Align Climate Solutions Inc.

  Align Climate Solutions needs candidates with HVAC/R troubleshooting, plumbing, electrical and preventive maintenance experience, plus knowledge of refrigerant regulations. An HVAC/R trade certification or apprenticeship is required, Red Seal is an asset, and a valid driver's licence is needed.

  HVAC/R test equipment, Hand tools

• 9h

  Journeyman electrician

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a licensed Journeyperson Electrician certification and experience with machinery and electrical maintenance. They must read blueprints and schematics well, communicate clearly, and follow Alberta safety rules.

  Blueprints, Schematics, Vendor manuals

• 10h

  Journeyperson Heavy Equipment Technicians (3rd year Truck and Transport Apprentices, or 4th year Heavy Equipment Apprentices will be considered)

  Edmonton, AB

  34,86–49,80 $/h

  CO

  City Of Edmonton

  2+ ansCandidates need a registered Alberta apprenticeship at the 3rd year Truck and Transport or 4th year Heavy Equipment level, or Journeyperson status with two years of vehicle maintenance experience. They need a Class 3 licence with air brake endorsement, the ability to get a City driver's permit and CVIP certification, and the ability to pass a physical evaluation that includes lifting 75 pounds.

  AssetWorks M5, diagnostic scanning tools, diagnostic computer software

• 11h

  Manager, Software (Embedded & Digital Products)

  London, ON

  95k–120k $/anSur placeTemps plein

  

  Wabtec: Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services.

  8+ ans3+ gestionWabtec needs candidates with a technical degree, 8+ years of software engineering experience and 3+ years leading teams. Strong C/C++, embedded Linux or RTOS skills, cybersecurity knowledge and a product and business mindset are expected.

  IBM Engineering Requirements Management DOORS, Docker, Kubernetes, Microsoft Azure, AWS

• 12h

  Mechanical Assembler

  Langley, BC

  28,44 $/hSur placeTemps plein

  RB

  Regal Beloit Canada ULC

  Candidates need prior electrical or mechanical experience, strong analytical skills and the ability to use hand and power tools. They must be able to lift 30 lbs, work with minimal supervision, and read technical drawings and schematics.

  Power tools, Hand tools, Jig saws, Grinders, Pneumatic tools, Cutters

• 13h

  Solution Analyst

  Winnipeg, MB

  PI

  Price Industries Limited: After more than 60 years, Price remains a privately held family company with a deep heritage and commitment to innovation and service.

  5+ ansCandidates need 5+ years in supply chain operations or ERP functional analysis in manufacturing, a degree or diploma in a related field, and hands-on enterprise ERP experience such as IFS Cloud, SAP, Oracle or Dynamics 365. IFS Cloud experience is strongly preferred.

  IFS Cloud, SAP, Oracle, Microsoft Dynamics 365, JIRA, Microsoft 365

• 14h

  Master Plumber / Building Service Operator

  Ontario

  A

  Aramark

  4+ ansCandidates need a valid plumbing trade certificate, four to five years of direct plumbing experience and three to five years in a similar building operations role. Strong English communication, basic computing skills and the legal right to work in Canada are also required.

  CMMS, Outlook, Excel, Word, saws, pipe tools

• 14h

  Contracts Analyst - Airside and Vendor Performance

  Dorval, QC

  Temps plein

  

  Air Canada: Canada's largest airline, the country’s flag carrier and a founding member of Star Alliance, the world's most comprehensive air transportation…

  1+ ansAir Canada needs candidates with a university degree or college diploma in a related field, or equivalent experience, and 1 to 2 years of hands-on Power BI and Power Platform work. Working knowledge of SQL, VBA and advanced Excel, plus strong analytical and communication skills, is required.

  Power BI, Power Apps, Power Automate, SQL, VBA, Excel

• 14h

  Journeyman Electrician

  Nisku, AB

  Temps plein

  SL

  Silent-Aire Limited Partnership

  Candidates need a licensed Journeyperson Electrician credential and experience with machinery and electrical maintenance. They must read blueprints and schematics, communicate clearly, pay close attention to detail and work safely under pressure.

• 14h

  Maintenance Worker II (MW2-CA52-004) - Bethany Calgary

  Calgary, AB

  Temps plein

  BB

  BCS Bethany Care Society

  3+ ansCandidates need Grade 12 or equivalent, three years of building operations and maintenance experience (hospital or large facility preferred), experience with boilers, chillers, HVAC and building automation systems, and a current ABSA certificate and 4th Class Power Engineering certificate. A valid Class 5 driver's licence and strong English are also required.

  JCI Metasys, boilers, chillers, HVAC equipment, pumps, water treatment equipment

21 entreprises