Emplois “vision inspection systems” au Canada – Page 2

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 3h

  Shipper Receiver

  Cambridge, ON

  23,07–29,89 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  3+ ansCandidates need a Grade 12 diploma or equivalent, 3 to 5 years of related experience, and experience with sit-down propane counterbalance and stand-up reach forklifts. A valid driver's permit and the ability to lift up to 50 lbs are required, and manufacturing experience and ERP use (Visual Manufacturing) are assets.

  Forklift (counterbalance), Forklift (reach), Visual Manufacturing ERP

• 3h

  Tote Room Operator

  Coaldale, AB

  Temps plein

  

  McCain Foods

  Candidates need a high school diploma or equivalent, a record of safe work practices, and WHMIS chemical handling experience. They must work rotating shifts in cold conditions, lift up to 40 lbs, and hold or obtain forklift, fall protection and scissor/boom lift certifications.

  PI system, Forklift, Scissor lift, Boom lift, Computer applications

• 3h

  Supervisor Signals & Communications Operations

  Calgary, AB

  ?

  POSITION REQUIREMENTS:; High school diploma or general equivalency; an electronics technology degree/certification from an accredited technical institute is a value add; Minimum of 2 years of combined experience in…

• 3h

  Chemical & Waste Management Specialist

  Toronto, ON

  

  Pattern Energy Group LP

  3+ ansPattern Energy Group LP needs candidates with a degree or diploma in environmental science, health and safety, chemistry, engineering or a related field, plus 3 to 5 years of corporate HSE experience. Candidates need working knowledge of WHMIS/GHS, OSHA, RCRA and TDG/DOT, and experience with SDS review, waste classification and regulatory reporting.

  KHA Online-SDS, SharePoint, Excel, Power BI, EHS platforms

• 3h

  Early Professional, Mechanical Engineering

  Thunder Bay, ON

  Temps plein

  W

  WSP

  Candidates need a mechanical engineering bachelor's degree, EIT registration or eligibility with Professional Engineers Ontario, and some internship or early-career experience. They need foundational mechanical knowledge, engineering design software skills, clear technical writing, and willingness to travel to field sites.

  engineering design software, Microsoft Office

• 3h

  Intermediate Mechanical Forensic Engineer

  Toronto, ON

  25–30 $/hSur placeTemps plein

  

  J.S. Held LLC: Held is a global consulting firm that combines technical, scientific, financial, and strategic expertise to advise clients seeking to realize value…

  3+ ansCandidates need a mechanical engineering degree, at least 3 years of relevant experience including internships, and strong analytical, writing and presentation skills. Travel to sites and the ability to work at heights and lift up to 50 pounds are required.

  Microsoft Office, SolidWorks, AutoCAD, Revit

• 3h

  Diesel truck technician/mechanic ii (3rd-5th year apprentice program)

  Etobicoke, ON

  33–35 $/h

  

  Penske Truck Leasing: Penske Truck Leasing is a Penske Transportation Solutions company headquartered in Reading, Pennsylvania.

  2+ ansCandidates need 2+ years of practical tractor-trailer maintenance experience, current enrolment in an apprenticeship program and membership in the relevant government trade registration. They also need a class G or class 5 driver's licence, shop tool proficiency and the ability to work in non-climate-controlled conditions.

  hand tools, power tools, pneumatic wrenches, welding equipment, hydraulic jacks, hoists

• 4h

  Mechanical Engineering Technician

  Oakville, ON

  38 $/hTemps plein

  

  Gastronomous Technologies Inc.

  1+ ansGastronomous Technologies needs a candidate with a one- to two-year mechanical engineering technology diploma and 1 to 2 years of hands-on experience with robotic or automated equipment. Candidates also need SolidWorks proficiency, food-grade manufacturing awareness and the ability to read mechanical drawings and BOMs.

  SolidWorks, MS Project, CAD software, Welding equipment, Bending equipment

• 4h

  Security Professional

  Ottawa, ON

  Temps partiel

  

  Allied Universal: Allied Universal®, a leading security and facility services company, provides proactive security services and cutting-edge smart technology to…

  Allied Universal needs candidates with a valid Ontario Security Guard licence, First Aid and CPR, and a high school diploma or equivalent work experience. Familiarity with access control, CCTV monitoring and report writing is also required.

  CCTV, alarm systems, access control systems, surveillance systems

• 4h

  Senior, Manager Equipment Maintenance

  Toronto, ON

  

  VIA Rail Canada: VIA Rail operates Canada’s national passenger rail service on behalf of the Government of Canada.

  10+ ans5+ gestionVIA Rail Canada needs candidates with college or university education, or 10 years of experience including 5 in a leadership role maintaining equipment, preferably in a unionized environment. Strong coaching, problem-solving, communication and analytical skills, knowledge of Transport Canada railway regulations and Microsoft Office are expected.

  Equipment maintenance, Direct inward dialing, Leadership, Process improvement, Coaching, Employee relations

• 4h

  Technicien ou Technicienne – Structure Postes

  Montréal, QC

  HybrideTemps plein

  

  CIMA+

  3+ ansCandidates need a DEC in civil engineering, construction or a related field, three or more years of experience including structural work, and excellent AutoCAD skills. French fluency and an ASP Construction safety card are also required.

  AutoCAD, MS Office

• 4h

  Industrial Electrician

  Manitoba

  Temps plein

  

  City of Winnipeg

  5+ ansCandidates need a Manitoba Construction Journeyperson Electrician certificate or equivalent, plus at least five years of recent journeyman experience with three-phase circuits up to 600 V in industrial or commercial settings. A valid Manitoba Class 5 licence, an Electrical Contractors License "A" and the ability to work outdoors in all seasons are also required.

  Emergency power generators, UPS systems, Power distribution systems

• 4h

  Intermediate Mechanical Engineer - Hydro

  Vancouver, BC +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  4h

  Intermediate Mechanical Engineer - Hydro

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  4h

  Structural Engineer (Subject Matter Expert)

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  20+ ansCandidates need a civil engineering degree with a structural specialization, a P.Eng. or PE licence, and at least 20 years of progressive structural experience, ideally in consulting. Strong expertise in power infrastructure design, codes such as CSA, AISC, ACI and ASCE, and structural analysis software is required.

  STAAD.Pro, RISA, SAP2000, PLS-TOWER, LPile, MFAD

• 4h

  Specialist, Project Management and Planning (Major Projects)

  Prince Albert, SK

  Temps plein

  H

  HealthCareersInSask.ca

  3+ ansCandidates need 3 to 5 years of experience leading projects, a project management certificate or a related architecture, engineering, interior design or facilities degree or diploma, and a valid Class 5 driver's licence. Strong communication, analytical and leadership skills are also needed.

• 4h

  Quality Control Manager – Heavy Maintenance

  Calgary, AB

  Sur placeTemps plein

  

  Avmax Careers - Canada

  Candidates need a valid AME License (M2) with extensive heavy maintenance, modification and inspection experience, and strong knowledge of aviation quality systems and Canadian Aviation Regulations. Type endorsements for Dash 8 or CRJ aircraft and prior ACA authorizations are strong assets.

• 4h

  Parks & Open Space Designer - TERM

  Red Deer, AB

  44,75–49,87 $/hSur place

  

  The City of Red Deer

  3+ ansCandidates need a university degree or technical diploma in landscape architecture, parks planning or environmental sciences, with three or five years of park and open space design experience. They also need knowledge of survey work, municipal park standards, land use planning and drafting software.

  Blue Beam, Microsoft Excel, Microsoft Word, Microsoft PowerPoint, Microsoft Access

• 4h

  Class 5 Route Driver with Air Brakes

  Nanaimo, BC

  28 $/hSur placeTemps plein

  

  Daniels Health

  1+ ansCandidates need a Class 5 licence with air brakes and at least 12 months of verifiable driving experience within the last 36 months. They must have a clean CVOR and driver's abstract, be able to lift and push heavy loads, and pass the background check, medical test and road test.

  HOS application, mobile device

• 5h

  Sanitation Supervisor

  Guelph, ON

  Sur placeTemps plein

  ML

  Maple Leaf Foods Inc.

  5+ ans5+ gestionCandidates need at least 5 years of supervisory experience, ideally in food manufacturing, with knowledge of sanitation processes, cleaning chemistry and sanitary design. Strong leadership, communication and English skills are required, along with HACCP, GMP, WHMIS and food safety knowledge.

  SAP, Kronos, CIP systems, COP systems, chemical dispensing systems

  5h

  Maintenance Supervisor (Nights)

  Winnipeg, MB

  Sur placeTemps plein

  ML

  Maple Leaf Foods Inc.

  3+ ans3+ gestionCandidates need 3 to 5 years of supervisory experience in a unionized setting and a college electro-mechanical diploma or a licensed trade with related experience. They should know preventive and predictive maintenance, be comfortable with a maintenance management system such as SAP-PM, and have strong troubleshooting and leadership skills.

  SAP-PM, CMMS

• 5h

  General Manager - Store CAN6814

  Rigaud, QC

  Temps plein

  CC

  CARQUEST Canada Ltd (720)

  2+ ans2+ gestionCandidates need 2-3 years managing a team of 10-20 in a fast-paced retail setting, proven profitability experience, and a high school diploma. A valid driver's licence is required, and a business degree and ASE certification are preferred.

  Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Système de recherche de pièces, Équipement de test et de diagnostic

• 5h

  Driver - Roll Off with Trailer

  Trail, BC

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  1+ ansCandidates need a valid Class 1 CDL and at least one year of commercial driving experience or a CDL school certificate. They must pass safety-sensitive screening and show they can safely drive the truck and operate its equipment.

  roll-off truck, ancillary equipment

  5h

  Driver - Roll Off with Trailer

  Trail, BC

  

  GFL Environmental: GFL Environmental is the only major diversified environmental services company in North America offering services in solid waste management, liquid…

  1+ ansCandidates need a valid Class 1 CDL and at least one year of commercial driving experience or a CDL school certificate. They must pass safety-sensitive criteria and be able to safely operate the truck and equipment.

  roll-off truck, ancillary equipment

20 entreprises