Emplois “Compressors” au Canada – Page 22

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Engineer mw5/se4

  Chilliwack, BC

  37,72 $/h

  

  Fraser Health Authority

  2+ ansCandidates need a 4th class Power Engineer certificate recognized in B.C. and two years of recent related experience, or an equivalent mix of education, training and experience. Strong communication skills and the ability to read blueprints and specifications are also needed.

  Building automation system, Boilers, HVAC systems, Emergency power generators, Chemical treatment equipment

  1 mois

  Assistant Chief Power Engineer

  Burnaby, BC

  48,09 $/hTemporaire

  

  Fraser Health Authority

  6+ ans1+ gestionCandidates need a 2nd Class Power Engineer certificate recognized by the Province of BC and at least six years of recent related experience, one year of it in a supervisory role. Strong communication, supervision, blueprint-reading and equipment-operation abilities are also needed.

  Computerized maintenance tools, Boilers, Steam traps, Pumps, Compressors, Auxiliary generators

  1 mois

  Engineer MW5/SE4

  Chilliwack, BC

  37,72 $/h

  

  Fraser Health Authority

  2+ ansFraser Health needs a 4th class Power Engineer certificate recognized in BC and two years of recent related experience, or an equivalent mix of education, training and experience. Candidates also need good verbal and written communication, the ability to read blueprints and specifications, and the physical ability to do the work.

  Building automation systems, Boilers, Generators, Electro-pneumatic valves, Transducers, Relays

• 1 mois

  Stationary Engineer

  Cambridge, ON

  45–48 $/hSur placeTemps plein

  

  CGT

  3+ ansCandidates need a Stationary Engineer Class 3 or better certificate and TSSA certification, plus 3+ years of hands-on industrial maintenance experience. Strong analytical skills, reporting ability, computer skills and knowledge of environmental and safety regulations are also required.

  MP2, Microsoft Office, CMMS, boilers, thermal heaters, chillers

• 1 mois

  Auto Detailer Needed

  Toronto, ON

  Temps plein

  

  Favorit Motors

  2+ ansCandidates need at least 2 years of auto detailing experience, with skill in wet sanding, paint correction, heavy cutting and buffing, and final polishing. Knowledge of mixing cleaning chemicals and working to management instructions is expected.

  pressurized cleaning equipment, air compressor, squeegee

• 1 mois

  Cryogenic Engineer

  Toronto, ON

  

  Kinectrics: Kinectrics is an integrated lifecycle management services company providing testing, inspection, certification and engineering consulting for the…

  6+ ansCandidates need a bachelor's degree in an engineering or physics discipline and 6+ years of cryogenic engineering experience, especially with hydrogen and helium systems. They also need strong knowledge of thermodynamics, codes and standards, and CAD and simulation software, and must be eligible to register as a P.Eng. in Ontario.

  SolidWorks, AutoCAD, FEA software, PLC control systems

• 1 mois

  Specialist Mechanical Engineer - Turbomachinery

  Calgary, AB +1

  Sur placeTemps plein

  W

  Worley: Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia.

  Candidates need a Mechanical Engineering bachelor's or master's degree, P.Eng. registration with APEGA or eligibility for it, and extensive progressive experience with turbomachinery and high-speed rotating equipment. Deep knowledge of rotor dynamics, vibration analysis and API standards is expected.

  machinery analysis software, engineering document management systems

• 1 mois

  Ingénieur(e) ou analyste, analyse d’opérabilité / Engineer or Analyst, Operability Analysis

  Longueuil, QC

  Temps plein

  

  RTX

  3+ ansBaccalauréat en ingénierie, 3 à 7 ans d’expérience; Maîtrise en ingénierie, 2 à 5 ans d’expérience (atout); Anglais essentiel, français un atout

  Matlab, Simulink, MS Excel, VBA, Enovia V6, PLM

  1 mois

  Agent de méthodes – Procédés spéciaux | Génie de la fabrication / Methods Agent – Special Processes | Manufacturing Engineering

  Longueuil, QC

  Temps plein

  

  RTX

  3+ ansDEC en génie mécanique ou métallurgique, ou expérience pertinente; 3 à 5 ans d'expérience; Expérience en soudure, revêtement thermique ou grenaillage (atout)

  CATIA V5, SAP, MS Project, Microsoft Office

• 1 mois

  Maintenance Technician

  Langley, BC

  40–45 $/hTemps plein

  

  Randstad Canada

  3+ ansCandidates need at least 3 years of industrial maintenance experience in a fast-paced plant, Millwright or trade background preferred. They must be confident with mechanical troubleshooting, shop hand tools and basic automation, and must currently live in British Columbia with the right to work full-time in Canada.

  CNC machinery, PLC, VFD, servo drives, precision measuring devices, shop hand tools

  1 mois

  Stationary Machine Mechanic

  Kirkland, QC

  33–45 $/hTemps plein

  

  Randstad Canada

  5+ ansCandidates need a DEP in Stationary Engine Mechanics, 5 to 10 years of practical manufacturing experience, strong technical analysis skills, and willingness to take on-call rotations.

  boilers, compressors, building automation system, fire main pump, emergency generators

  1 mois

  Millwright

  Cambridge, ON

  45–46 $/hTemps plein

  

  Randstad Canada

  3+ ansCandidates need a 433A certification and three to five years of maintenance experience in a factory or plant. They should know heavy machinery, have basic knowledge of PLCs and control systems, and be comfortable with computers and communication.

  CNC lathe, Manual mill, Plate roller, Saw, Air compressor, PLC

  1 mois

  Millwright

  Etobicoke, ON

  48,13–49,13 $/hTemps plein

  

  Randstad Canada

  3+ ansCandidates need a valid 433A Industrial Millwright licence, three to five or more years of industrial maintenance experience (ideally in food, beverage, dairy or packaging), and skill in mechanical troubleshooting and reading blueprints. CMMS experience is required, and SAP experience is an asset; a Class B Refrigeration licence is a strong asset.

  CMMS, SAP, Blueprint and schematic drawings, Compressors, Chillers, Boilers

• 1 mois

  Equipment Maintenance/Operator

  Ottawa, ON

  Temps plein

  

  Morguard: Morguard is a fully integrated real estate company.

  3+ ansCandidates need 3 to 5 years of experience maintaining commercial, industrial or institutional mechanical systems, with strong troubleshooting on rotating equipment and the ability to read blueprints and O&M manuals. They must hold a valid driver's licence, lift up to 50 lbs, work at heights, and respond to after-hours emergencies.

  Forklift, Aerial lift, Rigging equipment, Fall protection equipment

• 1 mois

  Intermediate Electrical Designer

  Calgary, AB

  42–63 $/h

  

  Lauren Services: Lauren Services is a full-suite engineering and project execution service provider that has roots back to a small consultancy partnership in Calgary…

  4+ ansCandidates need an electrical engineering technology diploma or equivalent, 4+ years of oil and gas electrical design experience at an EPC, EPCM or consulting firm, and practical work in both power and controls. They also need drafting software skills, attention to detail and the ability to work with limited supervision.

  AutoCAD, Bluebeam, Elecdes, SmartPlant, Intergraph, Microsoft Access

• 1 mois

  Repair Shop Manager - Etobicoke,

  Burlington, ON

  Temps plein

  GC

  GEA Canada Inc.

  8+ ans5+ gestionCandidates need technical or engineering education, 8 to 15+ years of workshop or repair experience (largely on industrial centrifuges or high-speed rotating equipment), and 5+ years of leadership experience managing supervisors. Experience with ERP/MRP systems and performance reporting is also required.

  ERP system, MRP system

• 1 mois

  Roads Maintainer

  Wellesley, ON +1

  34,99 $/hTemps plein, Temporaire

  

  theregio03

  2+ ansCandidates need a Grade 12 education, a valid Class D driver's licence with Z endorsement, and a passed pre-hire physical demands test. Two years of directly related equipment experience and the ability to work variable shifts, including nights and weekends, are required.

  Dump truck, Plow, Salt spreader, Tractor, Flail mower, Boom mower

• 1 mois

  Temporary Arena/Pool Operator

  Ontario

  23,87–30,70 $/hTemps partiel

  

  City of Burlington

  Candidates need experience with an ice resurfacer and edger, power and hand tools, and basic troubleshooting of compressors, motors and pumps. They also need basic computer skills, Standard First Aid and CPR C + AED, and a valid G Class driver's licence with an acceptable abstract.

  ice resurfacer, ice edger, power tools, hand tools, Microsoft Office, refrigeration equipment

• 1 mois

  Maintenance Supervisor

  Edmundston, NB

  

  emergiTEL Inc.

  5+ ansCandidates need a technical diploma or degree (or equivalent industrial experience), 5+ years of industrial maintenance experience, and prior supervisory or lead experience. They must be fluent in French and English, know preventive and predictive maintenance, and be comfortable with CMMS work-order systems.

  CMMS

• 1 mois

  Maintenance Mechanic

  Burnaby, BC

  

  Simon Fraser University

  5+ ansCandidates need a Red Seal Millwright, Welding or Automotive certification and five years of related maintenance experience. They also need a valid BC Class 5 driver's licence, basic computer skills, and the ability to lift 50 pounds and work at heights.

  Automotive scanner, Computerized preventative maintenance program

• 1 mois

  Underground Operator

  Newfoundland and Labrador

  Temps plein

  

  Dyno Nobel: With a history dating back 180 years, to the pioneering work of Alfred Nobel, the company is driven by a commitment to safety, innovation and…

  Candidates need a valid driver's licence, underground mining experience, and experience operating bulk emulsion loaders. A TDG certificate is required, with mechanical and boiler certification preferred. Strong communication, customer service and self-directed problem-solving skills are also needed.

  bulk emulsion loader, front end loader, boiler, compressor

• 1 mois

  Operating Engineer, Class 3

  Chalk River, ON

  Temps plein

  

  Canadian Nuclear Laboratories LTD

  Candidates need a Grade 12 diploma, an Ontario 3rd Class Operating Engineer qualification and a valid Ontario Class G licence. They also need knowledge of boiler codes and high-pressure steam systems, strong written and verbal communication, and working knowledge of Microsoft Office.

  DDC system, Microsoft Office, Pressure relief valves, Steam and hot water boilers, Refrigeration compressors, Pumps

  1 mois

  Refrigeration & Air Conditioning Mechanic

  Chalk River, ON

  Temps plein

  

  Canadian Nuclear Laboratories LTD

  Candidates need a Secondary School Graduation Diploma and a Refrigeration & Air Conditioning Mechanic qualification, plus hands-on HVAC and refrigeration experience. They must read technical drawings, hold Reliability Status with Site Access Security Clearance, and work well in multi-trade teams.

  fans, compressors, condensers, expansion valves, thermostats, humidistats

• 1 mois

  Power Engineer

  Halifax, NS

  IM

  I M P Group International Inc.

  Candidates need a Power Engineer Technology diploma and a Fourth-Class Power Engineer ticket, plus some knowledge of air conditioning and refrigeration. They must be eligible for Canadian Controlled Goods Program and U.S. ITAR clearances and commit to safety and continuous improvement.

  boiler, pump, compressor, generator

17 entreprises