Emplois “LOTO” au Canada – Page 22

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Service Technician

  Ontario

  TélétravailTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  2+ ansCandidates need an electrical engineering or related education, at least 2 years of service experience, preferably in renewable energy, and knowledge of medium voltage systems and energy storage. They must also communicate well and be able to travel over 50% of the time.

  SolBank storage power block, CMMS software

  1 mois

  Service Technician

  Ontario

  TélétravailTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  2+ ansCandidates need an electrical engineering or related education, at least 2 years of service experience (renewable energy preferred), and knowledge of codes and medium voltage systems. Strong communication skills and the ability to travel over half the time are also required.

  CMMS software

  1 mois

  MV Commissioning & Electrical Safety Manager

  Télétravail au Canada

  TélétravailTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  Candidates need extensive medium-voltage (up to 34.5kV) experience in utility, renewable or battery storage settings, plus hands-on experience supervising MV switching and commissioning. They also need experience leading technical teams and knowledge of CSA, NEC, IEEE, NFPA and OSHA standards.

  SolBank battery systems, String inverters, MV skids

  1 mois

  Lead Roving Technician

  Kitchener, ON

  Sur placeTemps plein

  CS

  Canadian Solar SSES (Canada) Inc.

  5+ ansCandidates need an electrical engineering or related education, at least 5 years of service experience (renewable energy preferred), knowledge of medium voltage and energy storage systems, strong communication skills, and willingness to travel.

  CMMS, Jira

• 1 mois

  Industrial Mechanic /Lead Hand

  Harrow, ON

  40,35 $/hTemps plein

  AA

  ATL-HAR Atlas Tube Canada, ULC

  5+ ansCandidates need a valid Industrial Maintenance Mechanic (433A) licence, trade or technical school training in welding, blueprint reading, hydraulics and mechanical systems, and at least 5 years of industrial maintenance experience. Welding certification and SAP skills are preferred or expected.

  SAP, diagnostic tools, welding equipment, industrial hand tools

• 1 mois

  AltaGas - E&I Maintenance Coordinator, REEF

  Prince Rupert, BC

  138k–150k $/anTemps plein

  

  AltaGas Ltd.

  Candidates need strong electrical or instrumentation technical skills, preferably a Red Seal journeyman electrician or instrument technician certification, and experience as an E&I foreman or lead. They must communicate well, troubleshoot equipment failures, be proficient with Maximo and Excel, and hold a valid driver's licence.

  Maximo, Excel, DCS, PLC

• 1 mois

  Pipefitters (Apprentice/Journeyperson) – Shutdown & Turnaround Work

  Fort McMurray, AB

  32,47–54,11 $/hTemps plein

  LC

  Ledcor CMS Services Ltd.

  Candidates need registered apprentice or journeyperson pipefitter certification and proven shutdown, turnaround or outage experience in oil and gas or heavy industry. They must read isometric drawings and P&IDs well and work 10 to 12 hour shifts, overtime and consecutive days.

  Journeyperson, Lockout/tagout, Regulatory compliance

  1 mois

  Rig Welders – Shutdown & Turnaround Work

  Fort McMurray, AB

  130,36 $/hTemps plein

  LC

  Ledcor CMS Services Ltd.

  Candidates need Journeyperson Welder certification (Red Seal preferred), a Class 5 driver's licence and their own welding rig. Experience as a rig welder in shutdowns or turnarounds in oil and gas, petrochemical, mining or heavy industry is required, along with safety knowledge and the ability to read technical drawings.

  welding rig, welding equipment, gouging equipment

  1 mois

  Ironworkers (Apprentice/Journeyperson) – Shutdown & Turnaround Work

  Fort McMurray, AB

  32,47–54,11 $/hTemps plein

  LC

  Ledcor CMS Services Ltd.

  Candidates need a registered apprentice or journeyperson ironworker certification and experience in shutdowns or turnarounds in oil and gas or heavy industry. They should be strong in rigging, structural steel and equipment setting, read blueprints, and be willing to work long shifts and overtime.

  Rigging equipment

• 1 mois

  Millwright

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  3+ ansCandidates need a Red Seal or equivalent industrial millwright or machinist licence and 3 to 5 years of hands-on industrial maintenance experience. Strong mechanical, welding and machining skills and digital work-order experience are also needed.

  eMaint, Welding equipment, Lathe, Drill press

  1 mois

  Millwright

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  3+ ansCandidates need a Red Seal or equivalent Industrial Millwright or Machinist licence and 3 to 5 years of hands-on industrial maintenance experience. Strong mechanical skills, welding and fabrication, blueprint reading and digital work-order systems are required.

  eMaint, lathe, drill press, mills, welding equipment, grinding equipment

  1 mois

  Back End Mechanic

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  3+ ansCandidates need a Red Seal Industrial Millwright or Machinist licence and 3 to 5 years of hands-on industrial maintenance experience. They need strong mechanical skills, welding and precision measurement, and comfort with digital work-order systems.

  eMaint, welding equipment, lathe, drill press

  1 mois

  DECO MAINTAINER

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  Candidates need good communication skills, mechanical aptitude and a strong commitment to safe, consistent work practices. Comfort with computers or tablets for work order documentation and willingness to work rotating 12-hour shifts are also required.

  eMaint, tablets, computers

  1 mois

  Front End Mechanic

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  3+ ansCandidates need a Red Seal or equivalent licence as an Industrial Millwright or Machinist and 3 to 5 years of hands-on industrial maintenance experience. Strong mechanical skills, safety commitment and familiarity with digital work order systems are required.

  eMaint

  1 mois

  DECO MAINTAINER

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  3+ ansCandidates need a Red Seal Industrial Millwright or Machinist licence and 3 to 5 years of industrial maintenance experience. Strong mechanical skills, safety discipline and digital work-order experience are expected.

  eMaint, Welding equipment, Lathe, Drill press, Mills

  1 mois

  Back End Mechanic

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  3+ ansCandidates need a Red Seal Industrial Millwright or Machinist licence and 3 to 5 years of hands-on industrial maintenance experience. They need strong mechanical skills, welding and precision measurement, and comfort with digital work-order systems.

  eMaint, welding equipment, lathe, drill press

  1 mois

  Front End Mechanic

  Toronto, ON

  Temps plein

  CM

  CROWN Metal Packaging Canada LP

  3+ ansCandidates need a Red Seal or equivalent licence as an Industrial Millwright or Machinist and 3 to 5 years of hands-on industrial maintenance experience. Strong mechanical skills, safety commitment and familiarity with digital work order systems are required.

  eMaint

• 1 mois

  Chief Power Engineer

  Bedford, NS

  54,31 $/hTemps plein

  

  Agropur coopérative

  5+ ans2+ gestionCandidates need a 2nd Class Power Engineer and 1st Class refrigeration operator certificate, at least 5 years of progressive power engineering experience, and 2 years leading a team. Strong mechanical aptitude, troubleshooting skills, and change management experience in a complex manufacturing site are also needed.

  CMMS

• 1 mois

  Millwright - Maintenance Technician , Hub500

  Kingston, ON

  

  Cyclic Materials Inc.

  5+ ansCandidates need Millwright certification 433A and at least five years of industrial maintenance experience, ideally in metal recycling or manufacturing. Cyclic Materials also wants strong mechanical and basic electrical troubleshooting skills, PLC and VFD knowledge, and the ability to wear a full-face respirator.

  PLC, VFD, diagnostic test equipment, pumps, shredders, crushers

  1 mois

  I&C Electrician, Hub 500

  Kingston, ON

  

  Cyclic Materials Inc.

  5+ ansCyclic Materials needs candidates with a 442A or 309A electrician certification and industrial experience, plus 5 years of industrial maintenance work. Candidates should be able to troubleshoot PLC/HMI systems, read blueprints and schematics, and wear a full-face respirator.

  PLC, HMI, VFD, Diagnostic tools, Full-face respirator

• 1 mois

  EHS Specialist

  Surrey, BC

  45,67–52,88 $/hTemps plein

  

  Industrial Electric Manufacturing: (IEM) is the largest independent full-line manufacturer of electrical distribution equipment and integrated power systems in the U.S.

  5+ ansCandidates need 5-10 years of progressive EHS experience in manufacturing or electrical settings and a bachelor's degree in safety, engineering, environmental science or a related field. Strong analysis, communication and regulatory knowledge are needed, with OFA Level 2 highly desired.

  Microsoft Office, EHS management software, powered industrial truck

8 entreprises