Emplois “Electrical drawings and schematics” au Canada – Page 26

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 26j

  Electrician (2nd year, 3rd year, 4th year, journeyperson)

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a Red Seal or AIT electrician certification, 500+ hours in the blue book, and experience with machinery and electrical maintenance. Strong blueprint reading, attention to detail and the ability to work well under pressure are required.

  blueprints, schematics, vendor manuals

  26j

  Journeyman electrician

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a licensed Journeyperson Electrician credential and experience with machinery and electrical maintenance. Strong blueprint reading, communication, attention to detail and the ability to work under pressure are expected.

  Blueprints and schematics

  26j

  Journeyman electrician tester - day and night

  Nisku, AB

  JC

  Johnson Controls

  Candidates need an Alberta Certified Journeyman Electrician (or equivalent provincial certification, preferred), basic PLC and mechanical knowledge, and the ability to read electrical schematics and use test meters. Good verbal and written communication is also needed.

  Electrical test meters, PLC

  26j

  Hvac o&m controls technician

  Richmond Hill, ON

  32–47 $/h

  JC

  Johnson Controls

  4+ ansCandidates need at least four years of commercial controls troubleshooting in HVAC, a vocational or associate's technical credential or two years of servicing experience, and strong written and verbal communication skills.

  Building automation software, Control system software, Electrical schematics tools

  26j

  Nait electrician (2nd year, 3rd year, 4th year, journeyperson)

  Nisku, AB

  JC

  Johnson Controls

  Silent-Aire needs a certified electrician with a Red Seal or AIT, at least 500 hours in the blue book, and experience with machinery repair and blueprint reading. Candidates should also be able to supervise apprentices and work carefully under pressure.

  Blueprints and schematics

  26j

  Electrical engineer

  Edmonton, AB

  JC

  Johnson Controls

  2+ ansCandidates need an electrical engineering degree and P.Eng. registration with APEGA (or P.L.(Eng) in scope), 2 to 6 years of electrical design or manufacturing experience, and working knowledge of NEC/CEC and UL/CSA. Occasional travel, mostly in Edmonton, and a valid driver's licence are required.

  AutoCAD Electric, Bluebeam Revu, EPLAN, SKM, ETAP, Visual Lighting Software

• 26j

  SF-1 Certified HVAC Production Technician

  Brossard, QC

  

  Groom & Associates

  Groom & Associates needs candidates with a valid SF-1 qualification and a diploma, DEP or vocational training in HVAC, refrigeration or electromechanics. Candidates need hands-on brazing, piping, electrical controls and testing experience, and the ability to read technical drawings.

  hand tools, power tools, gauges, meters, electrical and refrigeration testing instruments

• 26j

  Mechanical Designer and Drafter

  Beamsville, ON

  59k–68k $/anTemps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  1+ ansExpress Employment Professionals needs candidates with 1 to 4 years of engineering design experience, skill in AutoCAD and electrical drawings, and knowledge of the Ontario Building Code and Electrical Code. A diploma in mechanical or manufacturing engineering technology or a bachelor's degree is also needed.

  AutoCAD, Microsoft Office

  26j

  Electrical Engineer/Designer

  Beamsville, ON

  Temps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  1+ ansCandidates need one to two years of engineering design or electrical power systems experience and an Ontario professional engineer licence or a path toward one. Intermediate AutoCAD Electrical and advanced Microsoft Office skills are also needed.

  Microsoft Office

  26j

  Electronic Integration Technician (BP222)

  Pickering, ON

  25–30 $/hTemps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  2+ ansExpress Employment Professionals asks for 2-3 years of electro-mechanical assembly experience and an electronics or electro-mechanical diploma or certificate. Candidates need hands-on soldering, crimping and cable assembly skills, the ability to read schematics, and strong attention to detail.

  soldering iron, crimping tools, test equipment

• 26j

  Hydraulic Assembler

  Kitchener, ON

  Temps plein

  PP

  Patch & Permasearch

  Candidates need hands-on experience with trucks, mobile or heavy equipment and hydraulic systems. They must read schematics and technical drawings, troubleshoot leaks and pressure problems, and show strong mechanical aptitude and attention to detail.

  hydraulic testing equipment, hand tools, power tools

  26j

  Industrial Electrician

  Brampton, ON

  Contrat

  PP

  Patch & Permasearch

  Candidates need journeyman experience or an apprenticeship, strong knowledge of industrial electrical systems and codes, and the ability to read schematics. Previous food manufacturing experience is highly preferred, and the work is physically demanding.

  hand tools

• 26j

  Maintenance Worker III

  Westlock, AB

  Temps plein

  

  Alberta Health Services

  1+ ansCandidates need a 5th Class Power Engineer certificate or a related post-secondary or technical credential, plus a Class 5 Alberta driver's licence and at least one year of plant operations and maintenance experience. Basic Windows computer skills and mechanical aptitude are also required.

  boilers, HVAC systems, refrigeration equipment, building control systems

• 26j

  Supervisor Calibration & Automation

  Mississauga, ON

  Temps plein

  

  Thermo Fisher Scientific

  5+ ans2+ gestionCandidates need at least 5 years of instrumentation, automation, calibration or electrical maintenance experience, including 2 years supervising staff. A licensed tradesperson credential in electrical, instrumentation or mechanical is required, plus knowledge of GMP, PLCs and 21 CFR Part 11.

  PLC, HMI, VFD, CMMS, Microsoft Office, P&ID drawings

• 26j

  Senior Electrical Design Engineer

  Kitchener, ON

  T

  TalentSphere

  3+ ansCandidates need 3 to 6 years of mechanical design experience in building consulting, a diploma or degree in mechanical engineering or a related field, and skills in AutoCAD and Revit. Knowledge of building codes and standards such as OBC and ASHRAE is expected.

  AutoCAD, Revit

  26j

  Power HVAC Mechanic/Electrician Technician

  Bolton, ON

  90k–120k $/an

  T

  TalentSphere

  5+ ansCandidates need at least 5 years of hands-on experience with industrial power, heavy equipment or HVAC systems, strong diesel and generator knowledge, and a valid driver's licence with a clean record. Strong troubleshooting, the ability to lift 45 lbs and personal tools are required.

  Diagnostic tools, Schematics, Technical manuals, Generator controls, Paralleling switchgear

• 26j

  Electrical Engineering Technician

  Peterborough, ON

  40–50 $/h

  GA

  GAL AeroStaff

  5+ ansCandidates need 5 to 10 years of electrical design experience with hydro-generators or induction and synchronous machines, plus solid electrical systems knowledge and troubleshooting skills. A bachelor's degree in electrical engineering is a plus.

  Multimeter, Ohmmeter

  26j

  Aircraft Avionics Technician - Calgary (22313)

  Calgary, AB

  GA

  GAL AeroStaff

  6+ ansCandidates need a diploma in aircraft maintenance or equivalent, at least six years of aircraft maintenance experience in a production or MRO setting, and the ability to read blueprints and technical manuals. Strong troubleshooting skills and strict attention to safety are essential.

  blueprints, technical manuals, test equipment

• 26j

  Electrical Designer II - Solar

  Calgary, AB +1

  Temps plein

  

  RRC POWER AND ENERGY

  3+ ansCandidates need a bachelor's degree or equivalent experience, plus 3+ years of electrical design work on utility-scale solar, substation, transmission or battery storage projects. They must be skilled in AutoCAD and know electrical design principles and the NEC, IEEE, NESC and NFPA 70E codes.

  AutoCAD, PVcase, PVCAD

  26j

  Electrical Designer II - Solar

  Calgary, AB +1

  Temps plein

  

  RRC POWER AND ENERGY

  3+ ansCandidates need 3+ years of electrical design experience in solar, substations, transmission or battery storage, plus AutoCAD proficiency. They also need knowledge of electrical codes such as NEC, IEEE and NFPA 70E, and strong communication and time management skills.

  AutoCAD, PVcase, PVCAD

• 26j

  Instrumentation Technician

  Ontario

  Temps plein

  TO

  The Ottawa Hospital: The Ottawa Hospital is one of Canada’s largest learning and research hospitals, with more than 1,100 beds, approximately 12,000 staff members and an…

  5+ ansCandidates need a two-year instrumentation college diploma and five years of hands-on control work within the last ten years. They must read schematics and manuals, communicate well in English and French, and be eligible to work in Canada.

  test equipment, building automation system

• 26j

  Industrial Electrician

  British Columbia

  AE

  Apex Extrusions Ltd

  4+ ansCandidates need a Red Seal or four years of industrial electrical experience, and must be able to read blueprints, schematics and electrical code. They also need strong troubleshooting, PLC-style wiring and ladder-logic knowledge, the ability to lift 50 lbs, and solid English communication.

  Testing devices, Diagnostic tools, MS Office

• 26j

  Fixed Plant Maintenance Planner

  Vancouver, BC +4

  Temps plein

  

  SKEENA GOLD + SILVER: Skeena is a Canadian mining exploration and development company focused on revitalizing the Eskay Creek and Snip Projects, two past-producing mines…

  5+ ansCandidates need at least 5 years of fixed plant maintenance experience in mining or heavy industry, including planning or scheduling. They need knowledge of mechanical and electrical/instrumentation work, CMMS software, and reading drawings. A Class 5 driver's licence is required.

  CMMS, P&ID, single-line diagram, PLC, DCS

• 26j

  Senior maintenance millwright

  Burlington, ON

  40–45 $/hTemps plein

  S

  Saint-Gobain

  10+ ansCandidates need a valid Ontario Industrial Mechanic Millwright (433A) certification and 10+ years of industrial maintenance experience preferred. Strong knowledge of hydraulics, pneumatics, power transmission and blueprints, plus strong English communication, is needed.

  Fiix, forklift, hand tools, power tools, welding equipment, PLC

13 entreprises