Emplois “DFT tools” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 29j

  ASIC Physical Design Engineer - DFT, Senior

  Télétravail au Canada

  TélétravailTemps plein

  

  Positron AI

  8+ ansPositron AI needs 8+ years of ASIC development with several production tapeouts, deep DFT experience, and hands-on Siemens Tessent. Candidates also need Verilog/SystemVerilog RTL skills, synthesis and gate-level verification, and scripting in Python, Tcl or Perl.

  Siemens Tessent, Verilog, SystemVerilog, Python, Tcl, Perl

  29j

  ASIC Design Engineer, Senior

  Télétravail au Canada

  TélétravailTemps plein

  

  Positron AI

  8+ ansCandidates need a BS or MS in electrical or computer engineering with 8+ years of ASIC or SoC RTL design experience. They need deep SystemVerilog skills, front-end EDA tool expertise, and hands-on work with at least three of HBM/DDR, PCIe/CXL, AMBA AXI/ACE/CHI, cache hierarchies, or high-throughput datapaths.

  SystemVerilog, Python, Tcl, Make, UVM, cocotb

  29j

  Physical Design Engineer - Synth, Senior

  Télétravail au Canada

  TélétravailTemps plein

  

  Positron AI

  8+ ansCandidates need 8+ years of ASIC implementation experience, including at least two tapeouts, and strong synthesis and timing-closure experience on large designs. Expertise with Genus or Design Compiler, SDC constraints, Tcl and Python scripting, and advanced process nodes (7nm and below preferred) is required.

  Cadence Genus, Synopsys Design Compiler, Tcl, Python

• 29j

  Senior Hardware/System Design Engineer

  Waterloo, ON

  Temps plein

  T

  Thinkoutsidethevalley

  5+ ansCandidates need 5+ years designing and verifying complex hardware, including FPGAs, high-speed links and memory buses. They also need expert PCB design skills, hands-on lab experience and strong communication skills.

  Altium, OrCAD, Allegro, PADS, high-speed mixed-signal oscilloscope, precision SMU

• 1 mois

  Senior Electrical Engineer

  Télétravail au Canada

  TélétravailTemps plein

  A

  Arc

  6+ ansArc needs candidates with 6+ years of electrical design experience, including mixed-signal boards taken into volume production. The role requires expertise in analog audio front-end design and digital audio interfaces, plus schematic, PCB layout and bring-up skills.

  DFT, Electrical engineering, Debugging, Printed circuit boards

• 1 mois

  Head of Hardware

  Vancouver, BC

  Sur placeTemps plein

  

  Sanctuary AI

  Candidates need a master's degree or equivalent experience in an engineering field, a proven record of taking complex electromechanical hardware into production, and experience leading multidisciplinary teams and manufacturing scale-up.

  Leadership, DFT, Supply chain management, Root cause analysis, Decision making, Mechanical engineering

• 1 mois

  Senior Manager of Test Engineering

  Dartmouth, NS

  Temps plein

  

  Aplin

  10+ ans5+ gestionCandidates need a technical degree, 10+ years of test engineering experience (ideally in manufacturing), and 5+ years of engineering leadership. Experience with automated test equipment, LabVIEW, calibration and Design for Test is needed, and eligibility for a Canadian security clearance is required.

  LabVIEW, Automated Test Equipment, Instrumentation, Data Acquisition Systems

• 1 mois

  ASIC Digital Design, Architect

  Markham, ON

  S

  Synopsys

  10+ ansCandidates need a master's degree or equivalent experience and 10+ years of digital ASIC design, ideally in high-speed or mixed-signal work. They need strong Verilog or VHDL skills, clock domain crossing knowledge, synthesis and DFT experience, and experience working with verification teams.

  Verilog, VHDL, synthesis tools, DFT tools

• 1 mois

  Sr. Manager, Physical Design Engineering, Annapurna Labs

  Toronto, ON

  Temps plein

  AD

  Amazon Development Centre Canada ULC

  10+ ans5+ gestionAmazon Development Centre Canada needs 5+ years leading physical design teams of 8+ engineers and 10+ years of hands-on ASIC/SoC physical design across advanced nodes. Candidates must master both Synopsys and Cadence EDA tools, advanced STA and power integrity, and hierarchical flows for very large SoCs.

  Synopsys Fusion Compiler, ICC2, PrimeTime, StarRC, RedHawk-SC, Cadence Innovus

• 1 mois

  Sandblaster - Industrial Painter

  Winnipeg, MB

  24 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of industrial painting or sandblasting experience, including epoxy and enamel work and use of DFT gauges. A respirator fit test, the ability to lift 50 lbs and reliable transportation are also required.

  Conventional spray equipment, DFT gauge, Sandblasting equipment

  1 mois

  Sandblaster - Industrial Painter

  Winnipeg, MB

  19,94–21,97 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of hands-on industrial painting or sandblasting experience, with conventional spray application and epoxy or enamel coatings. They must read fabrication drawings, use DFT gauges, pass a respirator fit test, lift up to 50 lbs, and have reliable transportation for an early start.

  DFT gauge, spray equipment, sandblaster, respirator

  1 mois

  Senior Electronics Designer – High-Speed PCB and Embedded Systems

  Waterloo, ON

  100k–135k $/anTemps plein

  

  Randstad Canada

  8+ ansCandidates need a bachelor's degree in electrical or computer engineering (master's or PhD preferred), typically 8+ years of hardware design experience, and expert skills in PCB layout tools, high-speed and mixed-signal design, signal and power integrity, and lab test equipment. Strong technical leadership and communication skills are required.

  Siemens PADS, Altium Designer, Cadence Allegro, high-bandwidth oscilloscope, logic analyzer, spectrum analyzer

• 1 mois

  DFT Engineer, Principal

  Toronto, ON

  Sur place

  

  Qualcomm Canada ULC

  8+ ansCandidates need 10+ years of SoC experience in RTL, DFT or front-end roles, and extensive use of Siemens, Synopsys and Cadence DFT tools. Strong Verilog, VHDL and SystemVerilog skills, knowledge of JTAG, iJTAG and BIST standards, and TCL or Python scripting are expected.

  Siemens DFT tools, Cadence DFT tools, Verilog, VHDL, SystemVerilog, TCL

  1 mois

  DFT Engineer (Senior to Staff level)

  Toronto, ON

  Sur place

  

  Qualcomm Canada ULC

  10+ ansCandidates need a bachelor's degree in an engineering or computer science field and 10+ years of SoC design experience in RTL, DFT or front-end work. They need strong knowledge of DFT tools, Verilog, VHDL and SystemVerilog, and standards such as JTAG, iJTAG and BIST.

  Siemens DFT tools, Cadence DFT tools, Verilog, VHDL, SystemVerilog, TCL

• 1 mois

  Lead Diagnostics Software Engineer, ATE Integration

  Markham, ON

  Temps plein

  AM

  Advanced Micro Devices, Inc

  8+ ansAMD needs 8+ years of silicon engineering experience, strong C/C++ and Python skills, and hands-on ATE experience such as V93000 or UltraFLEX. Candidates should know structural pattern generation and data center GPU and HBM architectures, and hold a relevant engineering or computer science degree.

  V93000, UltraFLEX, GitHub, CI/CD pipelines

  1 mois

  RTL Design Engineer

  Markham, ON

  Temps plein

  AM

  Advanced Micro Devices, Inc

  Candidates need a Bachelor's or Master's degree in Electrical or Computer Engineering or Computer Science (Master's preferred), plus proven RTL design and verification experience. Strong Verilog, SystemVerilog, scripting, and bus protocol knowledge (AXI, AHB, AMBA) are expected.

  Verilog, Tcl, Ruby, Perl, Python, Makefile

  1 mois

  DFT Design Engineer

  Markham, ON

  Temps plein

  AM

  Advanced Micro Devices, Inc

  Candidates need a bachelor's or master's degree in computer or electrical engineering, strong problem-solving skills, and good written and oral communication. Scripting in Perl, Python, Shell or C++, object-oriented programming, and digital circuit and VLSI knowledge are preferred.

  Perl, Python, TCL, C++, Shell

  1 mois

  Short Term 2027 Data Analyst Intern/Co-Op

  Markham, ON

  AM

  Advanced Micro Devices, Inc

  Candidates need to be enrolled in a Canadian university undergraduate program in data analytics, data engineering, computer or electrical engineering, computer science or a related field. Skills in Python, SQL, R, Java, Tableau, Power BI and cloud data platforms are strongly encouraged.

  Python, SQL, R, Java, Power BI, Kubernetes

  1 mois

  Silicon Design Engineer - Technical Lead

  Markham, ON

  Temps plein

  AM

  Advanced Micro Devices, Inc

  Advanced Micro Devices needs candidates with experience in I/O protocols such as USB, PCIe and CXL, plus micro-architecture and RTL design for high-speed, low-power digital blocks. A master's or bachelor's degree in electrical engineering or equivalent is preferred.

  Python, Perl

  1 mois

  RTL Design Engineer

  Markham, ON

  Temps plein

  AM

  Advanced Micro Devices, Inc

  Candidates need experience with I/O protocols such as USB, PCIe and CXL, plus RTL design for multi-clock, high-frequency, low-power designs. Strong analytical, communication and teamwork skills are expected, along with scripting in Python or Perl.

  RTL, DFT, Firmware, Analytical skills, Problem solving, Attention to detail

  1 mois

  SoC Lead Engineer – LEC & Low Power Signoff

  Markham, ON

  Temps plein

  AM

  Advanced Micro Devices, Inc

  Advanced Micro Devices needs candidates with proven SoC implementation and tapeout experience, deep knowledge of equivalence checking and low power verification, and hands-on use of industry EDA tools. Strong scripting, debugging, leadership and communication skills are also required, along with a BS or MS in Electrical Engineering, ECE, EEE or a related field.

  Synopsys Formality, Cadence Conformal, Synopsys VC-LP, Cadence Conformal Low Power, Design Compiler, Fusion Compiler

• 1 mois

  Industrialization Engineer

  Kingston, ON

  80k–105k $/an

  

  Alstom

  6+ ansCandidates need an engineering degree in electrical, electromechanical or mechanical fields and at least 6 years of manufacturing or industrial engineering experience, ideally with electrical products. Alstom also wants experience with electrical assembly, ERP and CAD/PLM tools, lean and process FMEA, and fluent English.

  SAP, CATIA, DELMIA, ENOVIA

• 1 mois

  Senior Physical Design Engineer - P&R

  Ottawa, ON

  TélétravailTemps plein

  

  BTA Design Services: specializes in ASIC and FPGA design and verification services, custom IP development, embedded software, and DevOps capabilities creation.

  8+ ansCandidates need 8 or more years of ASIC digital place-and-route experience, recent hands-on work with Synopsys and Cadence tools, and knowledge of advanced FinFET nodes. Scripting skills and strong written communication for remote teamwork are also required.

  Synopsys, Cadence, PrimeTime, StarRC, RedHawk, Calibre

• 1 mois

  Spécialiste en systèmes de fabrication / Manufacturing Systems Specialist

  Montréal, QC

  Temps plein

  

  Genetec: Leading technology provider of business intelligence, unified physical security, public safety, and operations.

  3+ ansBaccalauréat en génie électrique; Au moins 3 ans en fabrication électronique ou support matériel; Solides compétences en diagnostic électronique

  C#/.NET

13 entreprises