Emplois “thermal sensors” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 23j

  Senior Hardware/Firmware Engineer

  Montréal, QC

  Temps plein

  NI

  Noze Inc.

  7+ ansNoze needs candidates with 7+ years of electronics and embedded firmware experience, including a product taken to production. Strong low-noise analog design, STM32, MSP430 and ESP32 digital design, KiCad and PSpice skills, and a Bachelor's in Electrical or Computer Engineering (or equivalent experience) are required.

  oscilloscope, spectrum analyzer, precision DMM, SMU, LCR meter, logic analyzer

  23j

  Junior Technician - Analytical Chemistry

  Montréal, QC

  Temps plein

  NI

  Noze Inc.

  1+ ansCandidates need a diploma in chemistry or a related field and 1 to 3 years of hands-on lab experience with analytical equipment. Gas or VOC sampling experience, quality systems knowledge and strong attention to detail are assets.

  FTIR, gas mixing system, permeation oven, desorption tubes, permeation tubes

• 26j

  Senior Product Design Engineer

  Montréal, QC

  

  Groom & Associates

  7+ ansCandidates need a bachelor's degree in mechanical, electrical or mechatronics engineering, plus 7+ years of product design or NPI experience, ideally in consumer or electromechanical products. They need hands-on CAD and DFMEA, tolerance and DFM/DFA skills, and experience working with overseas suppliers.

  CAD, PLM, ERP

• 26j

  Electrical Controls Engineer

  Oakville, ON

  Temps plein

  

  Thermon: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions.

  5+ ansCandidates need 5+ years of hands-on electrical engineering experience and a bachelor's degree in electrical engineering. They need knowledge of industrial control systems, PLC programming, SCADA, instrumentation, and industrial networking, plus familiarity with CSA, UL and IEC standards.

  AutoCAD Electrical, SEE Electrical, PLC, HMI, SCADA

• 27j

  Senior Avionics Engineer

  Mirabel, QC

  120k–140k $/an

  

  Aversan: (www.aversan.com) is a trusted multi-service engineering and electronics manufacturing company.

  Candidates need a bachelor's degree in electrical or avionics engineering and experience with aircraft avionic and electrical systems. Knowledge of requirements management tools, equipment qualification and civil aircraft certification standards is also required.

  Requirements management tool, Systems Integration Laboratory (SIL)

• 27j

  Senior Diagnostics Engineer (Data Center Operations)

  Télétravail au Canada

  TélétravailTemps plein

  

  Phaidra: The Prism platform identifies, prioritizes and provides actionable insights to any issues in the facility mechanical systems.

  8+ ansCandidates need 8-12 years of experience in facilities, plant, industrial or controls work, with deep knowledge of cooling systems and strong Python data skills. Preferred: a mechanical, electrical or related engineering background, plus experience with industrial sensor data and control protocols.

  Python, Pandas, NumPy, BACnet, Modbus, SCADA

• 27j

  UAV Pilot

  Fort McMurray, AB

  

  Acuren Inspection, Inc.: Acuren (NYSE: TIC) is a leading provider of critical asset integrity services.

  Candidates need an Advanced RPAS Pilot Certificate, experience with industrial drone inspection or mapping, and skills in photogrammetry, LiDAR and GIS software. Confined-space inspection experience, rope access, NDT and an ROC-A are assets.

  DJI Terra, Pix4D, RealityCapture, ArcGIS, QGIS, AutoCAD

  27j

  UAV Pilot

  Fort McMurray, AB

  Temps plein

  

  Acuren Inspection, Inc.: Acuren (NYSE: TIC) is a leading provider of critical asset integrity services.

  Candidates need an Advanced RPAS Pilot Certificate and experience in industrial environments and drone inspection or mapping. Acuren Inspection also expects photogrammetry or GIS skills, technical reporting and strong client communication.

  DJI Terra, Pix4D, RealityCapture, ArcGIS, QGIS, AutoCAD

• 27j

  Controls systems technician

  Hamilton, ON

  26,60–36,41 $/h

  JC

  Johnson Controls

  3+ ansCandidates need a two-year degree in electronics, mechanical systems, computer technology or air conditioning, or three to five years of HVAC or electronic servicing experience. Johnson Controls also requires knowledge of HVAC controls, interpersonal and technical communication skills, PC experience and the ability to learn HVAC software programming.

  Johnson Controls configuration and commissioning tools, Electronic test equipment, PC

• 28j

  Controls Systems Technician

  Hamilton, ON

  26,60–36,41 $/hTemps plein

  JC

  Johnson Controls LP CAN

  3+ ansCandidates need a two-year degree in electronics, mechanical systems or a similar field, or three to five years of HVAC or electronic systems experience. They also need PC skills, the ability to explain technical information to non-technical people, and the ability to program HVAC software after training.

  Johnson Controls configuration and commissioning tools, Basic electronic test equipment, Controller software, PC

• 28j

  Field Service Technician - Richmond, BC

  Richmond, BC

  Temps plein

  

  Rivian

  Candidates need hands-on automotive experience, with EV or hybrid repair a plus, and an Automotive Journeyperson licence with Red Seal is strongly preferred. They must be at least 21, hold a valid driver's licence with a clean record, and handle lifting up to 50 lbs. and fluent English.

  DVOM, A/C machine, Hand tools, Power tools, Diagnostic tools

  28j

  Field Service Technician - Richmond, BC

  Richmond, BC

  

  Rivian

  Candidates need an automotive background, with hands-on shop experience highly preferred and recent automotive graduates encouraged to apply. An Automotive Journeyperson licence and Red Seal are strongly preferred, along with a valid driver's licence, a clean driving record, and the ability to lift up to 50 lbs.

  DVOM, hand tools, power tools, laptop, work order management system

• 28j

  Senior Robotics Engineer - Capture Systems

  Toronto, ON

  200k–250k $/anSur placeTemps plein

  P

  Peripheral

  5+ ansCandidates need a degree in computer science, electrical engineering, robotics or a related field, plus 5+ years building 3D capture systems at scale. They must have led multidisciplinary engineering teams and understand calibration, sensor fusion and state estimation.

  LiDAR, multi-camera rigs, PCB

  28j

  [I] Mechanical Engineering Intern - Capture Systems (Spring 2027)

  Toronto, ON

  65k–75k $/anSur placeStage

  P

  Peripheral

  Candidates need to be pursuing a Bachelor's or Master's in Mechanical Engineering or a related field, with SolidWorks experience and hands-on prototyping skills. Candidates must have the legal right to work in Canada and be based in or willing to relocate to Toronto.

  SolidWorks

• 29j

  Staff Discipline Facilities Engineer (ICE)

  Calgary, AB

  Temps plein

  ?

  12+ ansDesign the integration of sensors, field controllers and monitoring technologies into DCS/PLC/SCADA and OT-IT data systems, defining I/O, controller, control network, HMI, historian and…; Our ideal candidate will have…

  ICE, Electrical engineering, Control systems, Process engineering, Technical support, SCADA

• 29j

  Sr. Electronic Designer

  Victoria, BC

  80k–105k $/an

  

  AEM

  5+ ansCandidates need a bachelor's degree in electrical engineering or a related field and at least 5 years of hardware design in manufacturing. They should have supported products through NPI and production ramp, and have experience with PCB layout, power systems, embedded microcontrollers and regulatory compliance testing.

  PCB layout software, PLM system, LabVIEW, Python

• 29j

  Mechanical Design Engineer

  Toronto, ON

  90k–130k $/anTemps plein

  

  Daedal Systems

  3+ ansCandidates need 3 to 5 years of hands-on mechanical design and CAD experience, a physics background, and proven prototyping skills. A mechanical or engineering physics degree and familiarity with GD&T and thermal management are also required.

  SolidWorks, SolidWorks PDM, FEA software

• 1 mois

  Senior Mechanical Design Engineer

  Montréal, QC

  Sur placeTemps plein

  

  Engineered Arts

  Candidates need strong real-world mechanical design experience, advanced 3D parametric CAD (Autodesk Inventor preferred), GD&T and tolerance analysis skills, and hands-on prototyping. Experience taking hardware into production and working across electrical and controls teams is essential.

  Autodesk Inventor, Blender

• 1 mois

  Ingénieur(e), Avionique / Avionics Engineer

  Mirabel, QC

  Temps plein

  T

  Textron: is a multi-industry company that leverages its global network of aircraft, defense, industrial and finance businesses to provide customers with…

  5+ ansBaccalauréat en génie électrique ou avionique; 5 ans et plus d'expérience pertinente en aérospatiale; Connaissance pratique des systèmes avioniques et électriques

  Outil de gestion des requis techniques

  1 mois

  Ingénieur(e), Avionique / Avionics Engineer

  Mirabel, QC

  Temps plein

  T

  Textron: is a multi-industry company that leverages its global network of aircraft, defense, industrial and finance businesses to provide customers with…

  5+ ansBaccalauréat en génie électrique ou avionique; 5 ans et plus d'expérience pertinente en aérospatiale; Connaissance de l'outil DOORS requise

  DOORS

• 1 mois

  EV Autobody Repair Technician

  Dieppe, NB

  Temps plein

  CC

  CSN Collision

  3+ ansCandidates need at least three years of auto body collision repair experience and a collision repair certificate. Experience with electric or hybrid vehicles, I-CAR welding certification (required within an agreed period after hire) and a valid driver's licence are needed, along with the ability to lift 100 lbs.

  Frame-straightening equipment, Computerized measuring equipment, Welding equipment, Diagnostic scan tools

  1 mois

  Automotive Service Technician

  Hamilton, ON

  CC

  CSN Collision

  Candidates need a 310S licence or significant automotive repair shop experience. They should have strong mechanical knowledge, diagnostic and problem-solving skills, attention to detail, and a valid driver's licence. EV experience is an asset but not required.

  scan tools, alignment equipment, diagnostic equipment

• 1 mois

  Electrical Engineer

  Saanichton, BC

  Temps plein

  

  AML Oceanographic Ltd.

  5+ ansCandidates need a B.Eng in Electrical Engineering or a related field, 3+ years of Altium Designer work, and 3+ years at a technical product company. They also need 2+ years of daily bench work and 5+ years of electrical engineering experience.

  Altium Designer, Logic analyzer, Function generator

  1 mois

  Electrical Engineer

  Dartmouth, NS

  Temps plein

  

  AML Oceanographic Ltd.

  5+ ansCandidates need a B.Eng in Electrical Engineering or a related field, 3+ years of Altium Designer work, and 3+ years at a technical product company. They also need 2+ years of daily bench work and 5+ years of electrical engineering experience.

  Altium Designer, Logic analyzer, Function generator

17 entreprises