Emplois “Blueprint reading” au Canada – Page 37

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 16j

  Junior Structural Designer

  Ontario

  Temps plein

  

  Wesbell Communications

  4+ ansWesbell Communications needs candidates with 4+ years of structural steel and concrete drafting experience, telecom or tower and rooftop experience, and advanced AutoCAD skills. Candidates must read structural blueprints and communicate well in English.

  AutoCAD, Microsoft Office, CNC software

  16j

  Telecom Tower Rigger – Ontario

  Ontario

  Temps plein

  

  Wesbell Communications

  4+ ansCandidates need four years of hands-on tower, antenna, RF and fiber experience, comfort working at heights, and the ability to read blueprints. A valid driver's licence with a clean abstract and fluent English are required.

  Power tools, Hand tools, Rigging equipment, ANRITSU Site Master, Coaxial prep tools, Microsoft Office

  16j

  309A Licensed Electrician

  Mississauga, ON

  Temps plein

  

  Wesbell Communications

  3+ ansCandidates need a Licensed Electrician (309A) credential and at least 3 years of ICI electrical experience, including conduit work and fire alarm wiring. Strong code knowledge, supervisory ability and good English are required.

  Hydraulic benders, Handbenders

• 16j

  Composites Technician

  Markham, ON

  Temps plein

  

  Multimatic Advanced Manufacturing Technologies

  Candidates need a hands-on, motivated attitude and willingness to learn composite manufacturing. Comfort with hand and power tools, basic computer skills and a team-oriented, safety-focused approach are expected; no prior expertise is required.

  Autoclave, Oven, Sander, Grinder, Cutter, Drill

  16j

  Composites Technician

  Markham, ON

  Temps plein

  

  Multimatic Advanced Manufacturing Technologies

  Candidates need a hands-on, motivated attitude and willingness to learn composite manufacturing. Comfort with hand and power tools, basic computer skills and a team-oriented, safety-focused approach are expected; no prior expertise is required.

  Autoclave, Oven, Sander, Grinder, Cutter, Drill

• 16j

  Maintenance Technician

  Canada

  44–49 $/hTemps plein

  

  WORKFORCE

  3+ ansCandidates need journeyman millwright status and 3 to 5 years of manufacturing maintenance experience. They must read blueprints and drawings, communicate well, work safely and pass pre-employment checks.

  Journeyperson, Millwright, Attention to detail, Troubleshooting, Communication skills

• 16j

  Senior Lead Hand Installer (Office Furniture)

  Calgary, AB

  Temps plein

  MO

  McCrum's Office Furnishings

  Candidates need extensive commercial furniture or interior installation experience, strong leadership and coaching skills, and advanced knowledge of installation methods and quality control. A valid Class 5 Alberta driver's licence and the ability to lift over 40 lbs are required, and previous leadership experience is an asset.

  hand tools

• 16j

  2nd/3rd Year Apprentice Electrician-A/B shift, Brooks, AB

  Brooks, AB +1

  

  JBS Food Canada ULC.

  Candidates need completed college, CEGEP or technical training and prior experience as an electrician apprentice. Experience with medium voltage, PLCs, VFDs, HMIs and industrial networks is essential, and they must be available for shift work.

  Siemens S5, Siemens S7, Allen Bradley SLC5 PLC, VFD, HMI, Profibus

  16j

  Journeyman Electrician-C shift-MCF, Calgary, AB

  Calgary, AB

  

  JBS Food Canada ULC.

  3+ ansCandidates need college, CEGEP or vocational technical training and 3 years of industrial electrician experience, including apprenticeship time. Strong electrical, instrumentation, automation and pneumatics skills are required, along with electrical design and installation experience.

  Siemens S5/S7, Allen Bradley SLC5, VFD, HMI, Profibus, Ethernet

• 16j

  CNC Operator

  Peterborough, ON

  31,23 $/h

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  5+ ansCandidates need vocational school, technical college or apprenticeship training with CNC programming experience, and the ability to read blueprints and engineering drawings. Strong computer skills, Microsoft Office, and knowledge of CAD and MRP systems are preferred.

  Mastercam, CNC machine, Microsoft Office, MRP system, Corridor software

• 16j

  Landscaper

  Toronto, ON

  26–34 $/hSur placeTemps plein

  

  Jumpstart Refugee Talent

  1+ ansCandidates need about 12 months of practical landscaping experience and a valid Ontario Class G licence. They must be willing to work flexible shifts and complete safety training such as WHMIS and chainsaw operation.

  Lawn mower, Chainsaw, String trimmer, Power washer, Snow blower, Tiller

• 16j

  Quality Engineer

  Stratford, ON

  90k–110k $/anTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ ansCandidates need a university degree or equivalent experience and at least 2 years in a quality role. Arrow requires SPC knowledge, quality auditing experience, blueprint reading, and familiarity with ASME welding and nuclear standards.

  CMM, gauges, fixtures, Microsoft Office

  16j

  Production Supervisor

  Woodstock, ON

  90k–110k $/anTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  5+ ans5+ gestionCandidates need at least five years of supervisory experience in manufacturing, fabrication or welding, plus experience managing employee relations and discipline. They must read CAD drawings and blueprints and understand welding and fabrication processes.

  Visual Manufacturing ERP, CAD

• 16j

  Production Microscope Soldering Technician

  Burlington, ON

  Temps plein

  EM

  Evertz Microsystems Limited: Evertz Microsystems (TSX:ET) is a leading global manufacturer of broadcast equipment and solutions that deliver content to television sets,…

  Candidates need proven fine-pitch soldering experience using a microscope and experience reworking populated PCBs with multi-pin and area-array parts. Strong manual dexterity, attention to detail, the ability to read technical documents, and comfort working at a microscope for long periods are required.

  Soldering irons, Hot-air rework equipment, Microscope, Desoldering tools, Solder removal equipment

• 16j

  Tool and Die Maker (New Die Builds)

  Burlington, ON

  43 $/hTemps plein

  

  Kelly Services

  5+ ansCandidates need 5+ years of tool and die experience, including new die builds, metal stamping and tool steel work. Strong blueprint reading, troubleshooting and the ability to work independently are required.

  Work independently, Maintenance and repair, Machining

• 16j

  Emergency Apparatus Technician

  Red Deer, AB

  56,27 $/h

  

  The City of Red Deer

  2+ ansCandidates need a valid Journeyman Heavy Duty Mechanic certificate, a Class 3 licence with Q endorsement, and two years as a journeyman equipment mechanic. They must also have strong knowledge of diesel and gasoline engines, electrical and hydraulic systems, and centrifugal fire pumps.

  Electrical diagnostic equipment, Diagnostic software, Microsoft Excel, Microsoft Word, Microsoft Outlook, Fleet maintenance software

• 16j

  Shop Manager

  Whitecourt, AB

  Sur placeTemps plein

  

  FLINT Corp.: FLINT is a leading provider for Maintenance & Turnarounds, Wear Technologies, Fabrication, Modularization & Machining, Facility Construction,…

  3+ ansCandidates need several years of supervisory or management experience in fabrication or manufacturing, a solid grasp of industrial occupational health and safety, and skill reading blueprints and fabrication drawings. A technical education in engineering, manufacturing or project management is required, and a Journeyperson certificate is an asset.

  blueprints, fabrication drawings, welding equipment

• 16j

  Systems Mechanic

  Mississauga, ON

  MH

  Mitsubishi Heavy Industries, Ltd.

  2+ ansCandidates need at least 2 years of aircraft maintenance or similar experience, a systems maintenance course or equivalent, and the ability to read drawings. Hydraulic and fuel pipe swaging knowledge, use of test equipment, and current Canadian work authorization are required.

  hydraulic rig, pressure tester, test equipment

• 17j

  Cabinet Expressions- Cabinet Maker

  Coalhurst, AB

  32–40 $/hTemps plein

  

  UpSourced HR: UpSourcedHR specializes in the Southern Alberta region and understands the local market.

  5+ ansCandidates need at least 5 years of cabinetry experience, the ability to read shop drawings and cut lists, and skill with hand tools and woodworking machinery. A Red Seal Cabinetmaker certification is strongly preferred, and a valid driver's licence with a clean record and strong English are required.

  Panel saw, Edgebander, CNC equipment, Sander, Fastening devices, Power tools

• 17j

  CNC Machinist

  Regina, SK

  Temps plein

  AW

  Anlin Welding & Steel Fabrication Ltd.

  Candidates need machining experience and the ability to read blueprints, technical drawings and schematics. They must use precision measuring instruments and troubleshoot machines. Teamwork with machinists and production staff is expected.

  CNC lathe, CNC mill, CNC drill, calipers, micrometers

• 17j

  Production Framer

  Chemainus, BC

  

  RON ANDERSON & SONS LTD

  1+ ansCandidates need 1-3 years of wood framing, carpentry or prefabricated construction experience, ideally in a factory. They must read blueprints, work with hand and power tools, and handle physically demanding work.

  Saws, Nail guns, Presses, Hand tools, Power tools

• 17j

  Landscape Construction Sales Rep/Estimator

  North Vancouver, BC

  Temps plein

  

  Beyond Landscaping

  Candidates need landscape construction or hardscape experience and a track record in sales, estimating or client-facing work. They must read drawings, blueprints and specifications, speak and write English well, and hold a valid BC driver's licence.

  LMN estimating software

• 18j

  Fabrication supervisor - weekdays night shift

  Edmonton, AB

  JC

  Johnson Controls

  3+ ansJohnson Controls needs three or more years of supervising production, construction or fabrication work. Candidates should read blueprints, operate metal-working machinery, and know Microsoft Office and the Alberta health and safety rules.

  brake, shear, saw, punch, forklift, scissor lift

  18j

  Fabrication supervisor - weekdays night shift

  Edmonton, AB

  JC

  Johnson Controls

  3+ ansJohnson Controls needs three or more years of supervising production, construction or fabrication work. Candidates should read blueprints, operate metal-working machinery, and know Microsoft Office and the Alberta health and safety rules.

  brake, shear, saw, punch, forklift, scissor lift

18 entreprises