Emplois “Winding equipment” au Canada – Page 4

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 2j

  Primary Care Paramedic

  Calgary, AB

  Temps plein

  

  Alberta Health Services

  Candidates need active registration as a Primary Care Paramedic with the Alberta College of Paramedics, current BCLS CPR certification, a Class 4 licence with a clean five-year driver abstract, and the F.A.R.E. physical test where required. The job is physically demanding, with heavy lifting, long periods of standing and kneeling, and work in all weather.

  ambulance, BLS airway adjuncts

  2j

  Primary Care Paramedic

  Slave Lake, AB

  

  Alberta Health Services

  Candidates need non-restricted registration with the Alberta College of Paramedics as a Primary Care Paramedic, current BCLS CPR certification, and a Class 4 Alberta Operator's Licence with a clean five-year driver abstract. Applicants without a current clinical position must also pass the F.A.R.E. physical test.

  ambulance, airway adjuncts

  4j

  Advanced Care Paramedic

  Grande Prairie, AB

  Temps plein

  

  Alberta Health Services

  Candidates need active, non-restricted registration as an Advanced Care Paramedic with the Alberta College of Paramedics, current BCLS CPR, and a Class 4 driver's licence with a clean five-year abstract. Applicants who do not already hold an EHS clinical position must pass the F.A.R.E. physical test.

  ambulance, advanced life support airway adjuncts, medications, non-emergent transport vehicles

• 2j

  Staff Engineer, Thermal Design

  Toronto, ON

  

  Tenstorrent: Tenstorrent is a next-generation computing company that builds computers for AI.

  10+ ansCandidates need a bachelor's or master's in thermal, mechanical or a related engineering field and 10+ years of thermal design experience in servers, HPC or AI hardware. They must have hands-on liquid-cooling deployment experience, expertise in CFD and 3D CAD, and lab validation skills, and can travel internationally up to 10% of the time.

  Ansys Icepak, FloTHERM, SOLIDWORKS Flow Simulation, SolidWorks, Longwin thermal testing equipment, PLM

• 2j

  Structural Welder- Evening Shift

  Sherwood Park, AB

  39–40 $/hContrat

  

  Randstad Canada

  2+ ansRandstad Canada needs candidates with active CWB welding tickets (CSA W47.1), at least 500 hours of hands-on heavy structural steel fabrication, and a Red Seal/Journeyperson welder ticket or active Alberta apprenticeship. Strong blueprint reading and shop fabrication experience are required.

  MCAW equipment, FCAW equipment, overhead bridge crane

• 3j

  January 2027 Industrial Networking (Digital Systems) Co-op

  Sparwood, BC

  4,1k–6,2k $/moisSur placeStage

  

  Elk Valley Resources

  Candidates need to be working toward an undergraduate degree in Computer Science or Computer Engineering, with solid Windows skills and good communication. They must be comfortable working outdoors, driving at mine sites and in varied weather.

  Cisco switches, Fortinet firewalls, Cisco wireless access points, PLCs, SCADA, WhatsUp Gold

  3j

  Engineer In Training, Processing

  Sparwood, BC

  91k–127k $/anSur place

  

  Elk Valley Resources

  3+ ansCandidates need EGBC registration or eligibility for it, a preferred three years of technical processing experience, and a solid grasp of process engineering fundamentals such as mass balances, fluid mechanics and equipment sizing. Experience with change management, a valid Class 5 driver's licence or equivalent, and strong written and verbal communication are also required.

  EIT, Process improvement, Communication skills, Leadership, Coaching, Collaboration

• 3j

  Vineyard Mechanic

  West Kelowna, BC

  62k–90k $/anTemps plein

  IW

  Iconic Wineries of BC: The Iconic Collection provides an educational portal for anyone interested in discovering more about British Columbian or Canadian wines.

  Candidates need progressive mechanical repair experience and a journeyman certificate, apprenticeship completion or equivalent trade qualification. They also need a valid driver's licence with a clean record and must be available for on-call emergency repairs.

  Maintenance Connection, PLC systems, Microsoft Office

• 3j

  Vineyard Mechanic

  West Kelowna, BC

  62k–90k $/anTemps plein

  

  Mark Anthony Group Inc.: Founded in 1972, Mark Anthony has grown organically from a one-person wine importing business into an international drinks company whose hallmarks…

  Candidates need progressive mechanical repair experience and a journeyman certification or equivalent trade qualification. Experience with agricultural or heavy-duty equipment, strong diagnostic skills, a valid driver's licence with a clean record, and availability for on-call work are required.

  Maintenance Connection, PLC systems, Microsoft Office

• 3j

  Senior Electrical Engineer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  10+ ansCandidates need a university degree in Electrical Engineering, over 10 years of electrical engineering experience, and strong knowledge of utility substation and distribution design. A Professional Engineer registration in Canada or the United States is preferred, along with experience in renewable energy, HVDC and 3D design software.

  3D design software

  3j

  Senior Substation Engineer

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  12+ ansCandidates need a university degree in electrical engineering, over 12 years of substation and medium and high voltage design experience, and a registered Professional Engineer licence in the US or Canada. Strong communication skills and experience with protection, control and metering systems are required.

  3D design software

  3j

  Structural Engineer (Subject Matter Expert)

  Mississauga, ON +4

  

  Tetra Tech: With 25,000 employees working together, Tetra Tech provides clear solutions to complex problems by Leading with Science® to address the entire water…

  20+ ansCandidates need a civil engineering degree with a structural specialization, a P.Eng. or PE licence, and at least 20 years of progressive structural experience, ideally in consulting. Strong expertise in power infrastructure design, codes such as CSA, AISC, ACI and ASCE, and structural analysis software is required.

  STAAD.Pro, RISA, SAP2000, PLS-TOWER, LPile, MFAD

• 3j

  Agricultural Assistant - Ontario Crops Research Centre - Simcoe

  Simcoe, ON

  UO

  University of Guelph

  2+ ansCandidates need a two-year agriculture diploma or higher, and two years of general farm experience, with one year of agriculture research experience preferred. A G2 driver's licence is required to start, and the Grower Pesticide Safety Certification can be obtained after starting.

  tractor, spray equipment, hand and power tools, fertilizer applicator

• 3j

  Third Class Operating Engineer, Relief

  Ottawa, ON

  Temps plein

  

  University of Ottawa: Welcome the University of Ottawa's Human Resources LinkedIn page.

  Candidates need a valid 3rd class Operating Engineer licence issued by TSSA and experience operating and maintaining Power Plant equipment. Knowledge of Power Plant controls, building automation systems and safety procedures is required, and French and English is an asset.

  Central monitoring system, Preventive maintenance software, Fire alarm panels, Chilled water and heating equipment

• 3j

  Controls Engineer

  Toronto, ON

  Temps plein

  AE

  Aiolos Engineering Corporation

  5+ ansCandidates need a bachelor's degree or higher in engineering, at least 5 years of controls engineering and PLC programming experience, and eligibility to work in Canada. Experience with Siemens or Schneider PLCs and motion control is an asset.

  Siemens PLC, Schneider PLC, C#

• 3j

  Grid Expert

  Canada

  Temps plein

  C

  CATL

  CATL needs candidates with proven electrical network design experience, a solid grasp of power system engineering from 400kV down to LV, and familiarity with tools such as DIgSILENT PowerFactory, Revit and AutoCAD 3D. A bachelor's or master's degree in engineering, preferably electrical, is expected, along with clean energy experience and strong communication skills.

  Revit, AutoCAD 3D, BIM360, Microsoft Project, Microsoft Excel

• 3j

  Shipper Receiver

  Brantford, ON

  TI

  Tigercat Industries

  Candidates need prior shipping and receiving experience in a heavy manufacturing setting, plus crane and forklift experience or willingness to learn. Strong organization, attention to detail, communication and computer skills are required, along with the ability to handle physical lifting and outdoor work.

  Forklift, Crane, Pump cart, Inventory management system

• 3j

  Technicien(ne) de tests / Test Technician

  Montréal, QC

  Sur place

  

  OPAL-RT: The company's core software, RT-LAB, enables users to rapidly develop models suitable for Real-Time Simulation, while minimizing initial investment…

  1+ ansCandidates need a DEC in industrial engineering or industrial electronics, one to three years in a production department, and knowledge of MS Office, Altium, JIRA and Business Central. French is required and good English is needed for specialized software, plus skills in reading schematics, troubleshooting and SMD soldering.

  Altium, JIRA, Business Central, MS Office, multimètre, oscilloscope

• 3j

  Chef(fe) de Project - Chaîne d'Approvisionnement/ Supply Chain Leader

  Brossard, QC

  Temps plein

  GR

  GE Renewable Energy Canada Inc.

  10+ ansCandidates need a university degree in engineering or supply chain, over 10 years of experience in project and supply chain management, and proven leadership of matrixed teams. Fluency in English and one other language, plus strong problem-solving and negotiation skills, are also required.

  Op Tracker, Purchasing Tracker, Engineering Procurement Plan (EPP)

  3j

  Chef(fe) de Project - Chaîne d'Approvisionnement/ Supply Chain Leader

  Brossard, QC

  Temps plein

  GR

  GE Renewable Energy Canada Inc.

  10+ ansBaccalauréat en ingénierie ou chaîne d'approvisionnement; Plus de 10 ans d'expérience en gestion de projets et chaîne d'approvisionnement; Leadership d'équipes directes et matricielles

  Op Tracker, Purchasing Tracker, Engineering Procurement Plan (EPP)

• 3j

  Chef(fe) de Project - Chaîne d'Approvisionnement/ Supply Chain Leader

  Brossard, QC

  Temps plein

  

  GE Vernova: GE Vernova is a purpose-built energy technology company on a mission to electrify to thrive and decarbonize the world.

  10+ ansBaccalauréat en ingénierie ou chaîne d'approvisionnement; Plus de 10 ans d'expérience en gestion de projets ou chaîne d'approvisionnement; Leadership d'équipes directes et matricielles

  Op Tracker, Purchasing Tracker, Engineering Procurement Plan

• 4j

  Sr. Project Manager, Owners Engineering

  Toronto, ON +2

  Temps plein

  D

  DNV

  Candidates need project management experience on renewable energy or infrastructure projects, strong customer-facing advisory skills and the ability to lead multidisciplinary teams. Strong communication and the curiosity to solve unusual problems are also needed.

• 4j

  System Integrator (Renewable)

  Guelph, ON

  67k–93k $/anHybrideTemps plein

  

  CIMA+

  3+ ansCIMA+ needs candidates with more than 3 years of system integration and SCADA experience, including PLC, RTAC and HMI programming and knowledge of IEC 61131 standards. A valid driver's licence and reliable transportation are required, along with strong written and verbal English.

  Schneider Modicon, Allen-Bradley, GE, SEL, NovaTech, Ignition

• 4j

  Canada Sales

  Ontario

  Temps plein

  EE

  Envision Energy

  6+ ansCandidates need a bachelor's degree or higher, ideally in energy, power, engineering or business. They need 6-10+ years of Canadian or North American energy project sales, a record of wins, and strong negotiation skills in English and French.

18 entreprises