Emplois “drawing system” au Canada – Page 42

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 4j

  Accenture Construct - Senior Electrical Estimator, COM

  Calgary, AB +1

  Temps plein

  

  Accenture Infrastructure & Capital Projects Inc.

  14+ ansCandidates need 14+ years in engineering or general contracting cost consulting and 5+ years as an electrical estimator, with direct data center experience. They also need proficiency with Accubid or ConEst and digital take-off tools such as Bluebeam Revu.

  Accubid, ConEst, McCormick, Bluebeam Revu, LiveCount, CostX

  4j

  Accenture Construct - Senior Project Engineer, COM

  Toronto, ON

  Temps plein

  

  Accenture Infrastructure & Capital Projects Inc.

  Candidates need engineering project management experience and the ability to coordinate consultants, contracts and stakeholders across departments. Strong written documentation and board-level reporting skills are expected.

  4j

  Accenture Construct - Electrical Controls Engineer 2, COM

  Windsor, ON

  Temps plein

  

  Accenture Infrastructure & Capital Projects Inc.

  2+ ansCandidates need at least 2 years of related experience and a B.S. in Electrical Engineering. Basic AutoCAD and Microsoft Office skills and PLC or industrial automation familiarity are preferred.

  AutoCAD, EPLAN, Microsoft Office, Rockwell ControlLogix, Siemens Step 7, PLC

  4j

  Accenture Construct - Senior Mechanical Estimator, COM

  Toronto, ON

  Temps plein

  

  Accenture Infrastructure & Capital Projects Inc.

  10+ ansCandidates need at least 10 years of estimating experience at a large engineering, general contracting or cost consultant firm, plus an engineering technology or related post-secondary credential. A professional certification such as OACETT, CIQS or AACE is required, along with expert skill in estimating software and team leadership.

  CostX, HCSS, Microsoft Office

• 4j

  Maintenance PWLDV

  Drayton Valley, AB

  

  Connecting Care: Connecting Care is a convergence of complimentary service groups into one cohesive company, benefiting from the synergies all can provide.

  2+ ansCandidates need 2+ years of proven maintenance experience, Grade 12 or equivalent, and a driver's licence with a clean record. They must read and write fluent English, know health and safety rules, and be able to lift at least 50 lbs.

  Power tools, Hand tools, CMMS, Emergency generator

• 4j

  Technicien En Dessin Mécanique

  Saint-Laurent, QC

  35–50 $/hContrat

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  3+ ans3+ ans d'expérience en dessin mécanique; 3+ ans d'expérience en modélisation 3D/2D; Maîtrise d'AutoCAD et Inventor

  AutoCAD, Inventor, ERP

  4j

  Electrical Drafter / Designer

  Calgary, AB

  Temps plein

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  3+ ansCandidates need a diploma in electrical design or drafting, or equivalent experience, with 3+ years designing electrical panels and industrial control systems. Strong SolidWorks and AutoCAD Electrical skills and knowledge of NEC, NFPA and ISO/IEC standards are required.

  SolidWorks, SolidWorks Electrical, AutoCAD Electrical

  4j

  Electrical Engineering Manager

  Calgary, AB

  88–110 $/hTemps plein

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  8+ ans3+ gestionCandidates need a bachelor's degree in electrical engineering, P.Eng. registration or eligibility with APEGA, and at least 8 years of engineering experience with 3 years in leadership. Experience with industrial control panels, AutoCAD Electrical and UL/CSA/NEC standards is required.

  AutoCAD Electrical, PLC

  4j

  Electrical Technologist

  Etobicoke, ON

  35–48 $/hContrat

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  Candidates need knowledge of transmission and distribution electrical equipment and high-voltage test methods such as HIPOT and partial discharge. They also need to read single line diagrams, follow ISO 9001 quality practices, use standard data software, and operate heavy equipment safely at heights.

  oscilloscope, pumps, grinders, drill presses, cranes, forklifts

• 4j

  Red Seal Industrial Maintenance Electrician

  Alberta

  40,73 $/h

  

  CRH

  Candidates need knowledge of electrical safety, the ability to read electrical schematics and blueprints, and working knowledge of three-phase motors, programmable controls and circuits. Hydraulics, mechanics or related trade knowledge is preferred.

  hoist, crane, hand tools, power tools

  4j

  Stormwater Consultant

  Toronto, ON

  100k–110k $/an

  

  CRH

  5+ ansCandidates need 5+ years of technical sales experience and a valid driver's licence. A bachelor's degree or equivalent experience is preferred, along with proficiency in PowerPoint, Excel, Word, Outlook and CRM systems.

  Salesforce, PowerPoint, Excel, Word, Outlook

• 4j

  Mechanical Engineering Technician

  Oakville, ON

  80k $/anTemps plein

  

  Gastronomous Technologies Inc.

  1+ ansCandidates need a one- to two-year college or CEGEP mechanical engineering technology credential and 1 to 2 years of hands-on experience with robotic or automated electromechanical systems. Proficiency in SolidWorks and other CAD software, plus food-grade fabrication and stainless steel knowledge, is required.

  SolidWorks, MS Project, CAD software, sheet metal equipment, laser cutting equipment, welding equipment

• 4j

  Electrical Quality Specialist

  Calgary, AB

  

  Spartan Controls Ltd.: Spartan Controls is the leading provider of industrial automation, valves, measurement and process control technology and solutions in Western Canada.

  Spartan Controls needs an engineer or electrical technologist with experience in electrical equipment design review and testing, ideally on medium-voltage switchgear. Candidates should know IEEE C37.20.2, UL 891 and CSA C22.2 No. 31, and be able to use electrical test equipment.

  Relay test sets, Megohmmeter, Ductor, TTR test set, VLF test set, AC HiPot

• 4j

  Support Services Manager

  Surrey, BC

  71k–78k $/anTemps plein

  

  Optima Living: Optima Living—founded in 2007—owns and operates innovative seniors’ living communities throughout Alberta and BC, taking an unprecedented approach…

  2+ ans3+ gestionOptima Living needs at least two years of building operations experience, a valid driver's licence and an active Food Safe certificate. Leadership experience, Red Seal certification, a hospitality or power engineering program, CPR and First Aid, and knowledge of HVAC and building systems are assets.

  CMMS, Building management system, Preventative maintenance software

• 4j

  310S Automotive Technician/Red Seal Mechanic

  Ontario

  35–55 $/h

  RR

  Rockstar Recruiting

  Candidates need a 310S Automotive Service Technician licence or Red Seal endorsement, with strong diagnostic and troubleshooting skills and comfort working independently. Senior apprentices will also be considered. Own hand tools are required, and a DZ licence is an asset.

  scan tools, diagnostic equipment, hand tools

• 4j

  Project Manager, Construction

  Toronto, ON

  Temps plein

  EJ

  External Job Board

  5+ ansCandidates need a post-secondary degree or diploma in building, construction, architecture or engineering and 5+ years in commercial construction, including at least 3 years as a project manager. Strong knowledge of the Ontario Building Code, CCDC contracts and commercial building systems is required, with landlord-side experience a strong asset.

  Microsoft Excel, Microsoft Word, MS Project, Bluebeam

• 4j

  Senior Access Control & Network Technician

  Port Coquitlam, BC

  OG

  Ozz Group: Cricket Energy (cricketenergy.com) provides energy efficient hot water tank rental solutions to the new construction residential and commercial…

  10+ ansCandidates need a Security TQ, 10+ years in access control and low-voltage systems, and proven high-rise project experience. Hands-on skill with IP, analog and wireless access control, CCTV, structured cabling, fiber splicing and Fluke testing is expected, along with site management and network troubleshooting ability.

  Fluke, link testers, laptop diagnostics

• 4j

  Product Engineer in Training

  Toronto, ON

  Temps plein

  AC

  Aggreko Canada, Inc.

  Candidates need a bachelor's degree in an engineering discipline and EIT registration or active pursuit of P.Eng. designation in Canada. Product design experience and CAD skills are required, and knowledge of power systems or SCADA is an asset.

  CAD, SCADA

  4j

  Project Manager

  Toronto, ON

  Temps plein

  AC

  Aggreko Canada, Inc.

  7+ ansAggreko Canada needs candidates with a bachelor's degree in engineering and 7+ years managing complex engineering or infrastructure projects. Experience with CAD software and proven project management skills are also required.

  CAD software

• 4j

  Millwright - Straight Afternoons

  Brampton, ON

  43,06 $/h

  

  Manpower

  4+ ansCandidates need 4-5 years of related experience and a Industrial Millwright Mechanic 433A credential. They must read engineering drawings, troubleshoot electrical and mechanical systems, and know Omron, Siemens or Mitsubishi PLCs. Food packaging and power press experience is needed.

  CMMS, PLC, Power presses

• 4j

  Journeyman Electrician

  Calgary, AB

  Sur placeTemps plein

  

  Thermon: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions.

  Candidates need a Red Seal Journeyperson Electrician certification, strong knowledge of control panels and troubleshooting, and the ability to read schematics. Strong problem-solving, communication and independent work skills are also needed.

  electrical schematics, wiring diagrams, engineering drawings

• 4j

  Utilities CAD Technician (Senior) - ALTO Project / Cadence

  Montréal, QC

  Temps plein

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  8+ ansCandidates need a civil engineering technology or technical drafting diploma and more than 8 years of CAD or modelling experience on infrastructure projects. They also need advanced CAD skills, clash detection experience and fluent French and English.

  AutoCAD, Civil 3D, MicroStation, OpenRoads, SIG, SUE

  4j

  Utilities Engineer (Senior) - ALTO Project / Cadence

  Montréal, QC

  Temps plein

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  10+ ansCandidates need a civil engineering or related bachelor's or master's degree and at least 10 years of municipal utility design experience. Strong French and English communication and CAD or 3D design skills are required.

  CAD, 3D design environments

  4j

  Utilities CAD Technician (Intermediate ) – ALTO / Cadence Project

  Montréal, QC

  Temps plein

  

  SYSTRA: With its 11,000 employees, the Group's mission is to connect people and bring territories closer together in the 80 countries where it operates.

  3+ ansCandidates need a college or technical diploma in civil engineering technology, drafting or a related field, plus 3 to 8 years of CAD or 3D modeling experience on infrastructure projects. They must be proficient in CAD tools and communicate clearly in French and English.

  AutoCAD, Civil 3D, MicroStation, OpenRoads, GIS

14 entreprises