Emplois “hydraulics equipment” au Canada – Page 6

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1h

  Hydraulic Technician

  Milton, ON

  Temps plein

  W

  W3Global

  2+ ansCandidates need at least 2 years of hands-on hydraulic installation or service experience and a fluid power diploma or equivalent training. They must read schematics, select fittings and hose, understand 12-volt electrical systems, lift up to 50 lbs, and communicate clearly in English.

  hand tools, air tools, overhead crane

• 1h

  Fleet Supervisor

  Halifax, NS

  Temps plein

  

  Halifax Regional Municipality

  5+ ans3+ gestionCandidates need a Nova Scotia Trade Certificate in Truck and Transport (310T) or Automotive (310S), five years of fleet equipment repair experience, and at least three years in a supervisory role. Grade 12, a valid driver's licence, and knowledge of OH&S, NS MVA, CMVSA and the NS Motor Carrier Act are also required.

  Computerized work order system

• 1h

  3rd/4th Year Apprentice Pipefitter

  Conklin, AB

  Temps plein

  SG

  Strike Group

  Candidates need to be a registered 3rd or 4th year apprentice, hold or be willing to get H2S Alive and CSTS 2020 or PST tickets, pass drug and alcohol testing, lift 50 pounds and work outdoors.

  Blueprints, P&ID drawings, isometric drawings, hoisting and rigging equipment

  2h

  1st/2nd Year Apprentice Pipefitter

  Conklin, AB

  Temps plein

  SG

  Strike Group

  Strike Group needs a registered 1st or 2nd year apprentice with the provincial or federal authority. Candidates must hold or be willing to obtain H2S Alive and CSTS 2020 or PST tickets, pass drug and alcohol testing, lift 50 pounds and work outdoors.

  Hoisting and rigging equipment

• 1h

  Journeyperson Heavy Duty Mechanic, NSG

  Edmonton, AB

  Temps plein

  K

  Komatsu

  Candidates need a Red Seal Journeyperson Heavy Duty Mechanic or Millwright ticket, strong troubleshooting skills and hands-on experience with mining equipment. A valid driver's licence, the ability to lift 50 lbs and access any mine site without restrictions are also required.

  P&H shovels, P&H drills, P&H loaders, hand tools, power tools, precision measurement instruments

  2h

  Journeyperson Heavy Duty Mechanic, Field - Sparwood, BC

  Sparwood, BC

  Temps plein

  K

  Komatsu

  3+ ansCandidates need a Red Seal or Journeyperson Heavy Duty Mechanic or Millwright certification and 3 to 5 years of mining or construction experience. They must be able to read technical manuals, troubleshoot equipment on their own, work in a customer-facing role and lift 50 lbs unassisted.

  Micrometers, Joy Global equipment

• 1h

  Intermediate Mechanical Engineer, Industrial HVAC & Building Systems

  Hamilton, ON

  Temps plein

  TJ

  The JNE Group of Companies

  4+ ansCandidates need a mechanical engineering degree, about 4 to 6 years of relevant experience, and a P.Eng. or eligibility for Ontario licensure. Proficiency in Revit, AutoCAD, HAP and Excel is required, with industrial and piping experience as assets.

  Revit, AutoCAD, HAP, Microsoft Excel, AFT Fathom, AFT Arrow

• 1h

  Licensed Tool and Die Maker (430A)

  Cambridge, ON

  Temps plein

  TM

  Toyota Motor Manufacturing Canada

  2+ ansCandidates need an Ontario or Inter-Provincial Tool & Die Maker (430A) Certificate of Qualification and either apprenticeship completion plus 2+ years of experience or 7+ years of licensed experience. Strong machining, CNC, hydraulics, pneumatics and electrical skills are required, along with flexibility for rotating shifts.

  Mill, Lathe, Grinder, Crane, MasterCAM, WorkNC

• 1h

  Technical Trainer

  Winnipeg, MB

  Temps plein

  E

  Epiroc

  3+ ansCandidates need mining-related education or equivalent work experience, 3 to 5 years working with Epiroc underground equipment (LHD and TME), and strong technical, computer and communication skills. Bilingual French and English is preferred, and willingness to travel and go underground is required.

  Excel, Microsoft Office, Lotus Notes, equipment simulators

• 1h

  Full-Time Golf Course Mechanic - Grandview Golf Club

  Huntsville, ON

  Temps plein

  C

  ClubLink

  Candidates need experience in engine repair, hydraulic systems, electrical systems and reel grinding, plus excellent oral and written communication skills.

  mowers, tractors, utility vehicles

• 1h

  Automation Technician

  Edmonton, AB

  Temps plein

  A

  AltaSteel

  AltaSteel needs post-secondary training in automation or electrical, or equivalent competency, with hands-on experience with PLCs, HMIs, VFDs and 480V systems. Candidates also need knowledge of industrial communication protocols, CMMS software, and the ability to work independently and meet tight deadlines.

  Wonderware, Schneider Electric PLC, ABB VFD, SAP, Dynamics 365, MS Project

• 2h

  Field Service Mechanic - Husky Site

  Fort McMurray, AB

  Temps plein

  HR

  Herc Rentals

  3+ ansCandidates need a Journeyman Mechanic (Off Road) Certificate or Red Seal in HET, at least 3 years of hands-on aerial equipment experience and a valid Class 5 licence. They must pass a clean driver's abstract check and drug and alcohol screening, and must be clean shaven.

  Diagnostic tools, Laptop/tablet diagnostic software, Hand tools, Measuring instruments, Fleet management system

• 2h

  General Maintenance Worker (26-46)

  Timmins, ON

  Temps plein

  NC

  Northern College of Applied Arts and Technology

  2+ ansCandidates need a one-year certificate in a related field, at least two years of large building maintenance or equipment repair experience, a valid Class G driver's licence, WHMIS and First Aid/CPR/AED. Carpentry, plumbing, welding and troubleshooting skills are required.

  tractor, riding lawnmower, snowblower, small hand tools, air compressor, hydraulics equipment

• 2h

  Equipment Mechanic - Field (Red Seal Required)

  Calgary, AB

  Temps plein

  A

  Altec

  Candidates need a Red Seal designation, a high school diploma or equivalent, and experience with mechanics, electrical or hydraulic systems. Strong customer service, organizational and basic Microsoft Office skills are needed, along with the physical ability to lift up to 75 pounds and work overtime.

  Microsoft Office

• 2h

  Mechanic Ground Service Equipment Maintenance YOW

  Ottawa, ON

  Temps plein

  S

  Swissport

  1+ ansCandidates need 1 to 3 years of GSE maintenance experience and a heavy duty or automotive mechanic certification. They also need diesel diagnosis and repair skills, basic welding and hydraulics, a driver's licence, and the ability to obtain Transport Canada Security Clearance. Good English and French communication is required.

  Diagnostic equipment, Welding equipment

• 3h

  Mechanical Engineer

  Richmond, BC

  95k–115k $/anHybrideTemps plein

  GF

  General Fusion Inc.

  5+ ansGeneral Fusion needs candidates with a mechanical engineering or engineering physics degree and at least 5 years of post-graduate mechanical design experience. Candidates need hands-on skills, GD&T and materials knowledge, and comfort with changing requirements and tight deadlines.

  SolidWorks, SolidWorks PDM

• 3h

  Technicien(ne) biomédical(e) sur le terrain

  Montréal, QC

  Temps plein

  TS

  The Stevens Company

  Candidates need a biomedical or electronics engineering technology diploma, experience repairing electronic and mechanical equipment, and the ability to read blueprints and schematics. Strong problem-solving, communication and customer service skills are also needed, along with a valid Quebec class 5 licence and the ability to lift up to 23 kg.

  Instruments de mesure et d'étalonnage, Système de gestion de maintenance, Documentation technique des fabricants

• 3h

  Mechanical Engineering Technologist (C.E.T.)

  Calgary, AB

  Temps plein

  AI

  Automated Iron Inc.

  2+ ansCandidates need a mechanical engineering technology diploma, strong SolidWorks skills, and knowledge of GD&T, machining, welding and fabrication. Two or more years of design, drafting or manufacturing experience is preferred, and a valid driver's licence is required.

  SolidWorks, PDM

• 3h

  Engineering Supervisor

  Colborne, ON

  Temps plein

  

  BITS Recruiting

  5+ ansCandidates need a two-year post-secondary education in mechanical engineering technology, industrial technology or a related field, and 5 to 7 years of CAD-based mechanical component design experience. Strong knowledge of manufacturing processes, tooling, fixtures and CNC machining, plus excellent communication skills, is required; prior supervisory experience is preferred.

  CAD

• 3h

  Pre-Delivery Inspection (PDI) Technician

  Toronto, ON

  Temps plein

  SN

  Sinoboom North America

  Candidates need a diploma or degree in heavy equipment mechanics, hydraulics or electrical technology, or equivalent trade experience. A forklift certification or the ability to obtain one and knowledge of DC circuits, hydraulics and schematics are required; MEWP or heavy machinery experience is strongly preferred.

  forklift, hydraulic test equipment, service management system

• 3h

  Controls Hardware Designer

  Cambridge, ON

  Contrat

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  Candidates need strong EPLAN design experience and industrial electrical or control hardware design experience across at least six or seven of the listed technical areas. They must be able to work onsite in Cambridge, Ontario and meet 10 CFR Part 810 citizenship or access requirements.

  EPLAN, Allen-Bradley, Siemens, FANUC, ABB, KUKA

• 3h

  Millwright

  Cambridge, ON

  Temps plein

  CS

  CQ Search Group Ltd.

  Candidates need a valid 433A Industrial Millwright Certificate, previous experience in an industrial manufacturing environment, and strong mechanical troubleshooting skills. Experience in CPG or packaging manufacturing is highly preferred.

• 4h

  Field heavy equipment mechanic

  Terrace, BC

  Temps plein

  NA

  North Arm Equipment

  Candidates need experienced heavy-duty mechanic skills, strong hydraulic, electrical and mechanical troubleshooting, and comfort working in the field. A Red Seal Heavy Duty Equipment Technician certification is preferred, or substantial relevant experience meeting BC trade requirements.

  OEM diagnostic software

• 4h

  Mechanical Engineering Specialist

  Oakville, ON

  Temps plein

  OT

  Onewell Tech Inc.

  3+ ansCandidates need 3-5 years of experience in an industrial, mechanical manufacturing or technical field. They should be comfortable with hand and power tools, read technical drawings, and have good practical problem-solving and basic computer skills.

  hand tools, power tools, hydraulic equipment, pneumatic equipment, conveyor systems

22 entreprises