Emplois “Taping tools” au Canada – Page 8

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 14j

  Layout and Design Engineer - SNSPDs (Superconducting Nanowire Single Photon Detectors)

  Toronto, ON

  HybrideTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  2+ ansCandidates need an MSc or PhD in engineering, science or a related field with 2+ years of industrial experience. Expert skill in scripted photonic mask layout (gdsfactory, ipkiss3, Virtuoso or similar), DRC/LVS physical verification and GDSII/OAS output, plus Python, Git and strong collaboration skills are required.

  gdsfactory, ipkiss3, Virtuoso, OptoDesigner, Git, COMSOL

  14j

  Principal Analog ASIC Design Engineer

  Télétravail au Canada

  TélétravailTemps plein

  

  Xanadu: is a Canadian quantum technology company, and one of the world's leading photonic quantum hardware providers.

  10+ ansCandidates need 10+ years of analog or mixed-signal IC design experience, including leading complex tape-outs to silicon. They also need deep analog circuit design skills, multi-node process experience, and Cadence EDA mastery.

  Cadence

• 14j

  Autobody Repair Technician - ACX AutoLux

  Montréal, QC

  

  AutoCanada Inc.: AutoCanada’s Canadian Operations segment operates 64 franchised dealerships across multiple provinces, along with three independent used-vehicle…

  Formation postsecondaire pertinente ou formation connexe; Connaissance des processus de réparation des fabricants; Permis de conduire valide et bon dossier de conduite

  Pistolets pulvérisateurs de peinture, Ponceuses électriques

  16j

  Repair Technician - ACX Waverley

  Winnipeg, MB

  

  AutoCanada Inc.: AutoCanada’s Canadian Operations segment operates 64 franchised dealerships across multiple provinces, along with three independent used-vehicle…

  Candidates need an apprentice or Red Seal status, or a related post-secondary program or training course, and knowledge of manufacturers' repair processes. I-CAR certification is an asset, and a valid driver's licence with a safe driving history is required.

  Paint spray guns, Motorized sanders

• 14j

  Production Associate - Rotating Shifts

  Winnipeg, MB

  16,80–18,05 $/hContrat

  

  Randstad Canada

  Candidates need to read and speak English, have basic math skills, and be able to stand for long periods. A criminal record check must be passed, and prior electrical assembly experience is an asset but not required.

  Hand tools, Tape measure

• 14j

  Rigger Technician

  Alberta

  Temps plein

  

  Hercules SLR: Canada's #1 Securing, Lifting and Rigging Company

  Candidates need a valid Class 5 driver's licence, mechanical aptitude, basic math and the ability to read a tape measure. Attention to detail, dependability and a safety-first mindset are required, and the job is open only to people already legally able to work in Canada.

  grinders, cut-off saws, cutting torches, spoolers, hydraulic press, measuring equipment

• 14j

  Prepper

  Markham, ON

  Temps plein

  MA

  Markham Autoworks

  5+ ansCandidates need 5+ years of experience, including automotive body shop experience. They must show strong attention to detail, good written and oral communication, and a valid driver's licence with an acceptable driver's abstract.

  Paint supplies

• 15j

  Production Assembler

  Calgary, AB

  18 $/hSur placeTemps plein

  

  Cornerstone Building Brands: Cornerstone Building Brands is a leading manufacturer of exterior building products serving the residential and low-rise non-residential markets…

  Candidates need basic English, basic math and the ability to read a tape measure. They must be able to stand for long periods and lift 50 to 70 lbs, and experience with hand and power tools is required; general labour or manufacturing experience is an asset.

  Saws, Pneumatic tools, Automated welders, Hand tools, Power tools, Tape measure

• 15j

  Carpenter/Formsetter

  Brighton, ON

  46,27 $/hSur placeTemps plein

  

  North America Construction (1993) Ltd. - NAC Constructors Ltd.: provides true Master Builder services to the municipal, civil, biofuel and energy marketplace.

  3+ ansCandidates need 3-5 years of heavy construction formwork experience, including advanced formwork and Symons form system experience. Valid WHMIS, Health and Safety Awareness and Working at Heights certificates are required.

  levels, measuring tapes, tamper, compactor, scaffolding

• 15j

  Field Technician- Electrical/Mechanical

  Greater Sudbury, ON

  Temps plein

  

  Wajax: operates an integrated distribution system providing sales, parts and services to a broad range of customers in diverse sectors of the Canadian…

  3+ ansCandidates need 3 to 5 years in a similar role, a Red Seal Electrician Certificate or Electrical Engineering Technologist credential, and 3+ years of field service repair experience in electrical distribution. Hands-on electro-mechanical skill and the ability to read drawings and manuals are required.

  rigging equipment, vibration analysis equipment, welding equipment, PLC, test equipment

• 15j

  Cashier Team Member (Front End Service) - Part Time

  Toronto, ON

  18,50–25 $/hTemps partiel

  

  Whole Foods Market

  Candidates need strong basic math skills, patience and good communication with customers and team members. No prior retail experience is required, but the role demands attention to detail, a strong work ethic and comfort in a fast-paced setting.

  cash register, POS, ATM, box cutters, electric pallet jacks

• 15j

  Service Technician (PDL)

  Edmonton, AB

  TG

  The Gear Centre Group of Companies

  Pat's Driveline needs a high school diploma or equivalent, plus the ability to use measuring tools, do basic math with fractions and follow technical instructions. Hands-on automotive, heavy truck or industrial shop experience, plus manual lathe and welding skills, are assets.

  Vernier caliper, Dial indicator, Tape measure, Manual lathe, Diagnostic tools

• 15j

  Carpenter Apprentices

  Regina, SK

  Temps plein

  GC

  Golderado Contracting Corp

  Candidates need a carpentry apprenticeship or equivalent, CSTS 2020 and WHMIS 2015, and proficient English. Being able to lift 50 lbs, work at heights in bad weather, and read technical drawings is required, with fall protection and first aid certifications as assets.

  hand tools, power tools, tape measure, scaffolding, ladders

• 15j

  Welder/Fabricator

  Saskatoon, SK

  Temps plein

  CM

  Conveyer & Machine Service Ltd.

  Candidates need previous welding and fabrication experience, CWB certification, and mechanical knowledge of fabrication processes and equipment. They must be able to read blueprints and work safely with heavy components.

  plasma cutter, press brake, lathe, mill, crane, forklift

• 15j

  Head of Operations & Customer Success

  Toronto, ON

  Temps plein

  

  Success Matcher Recruitment: Success Matcher is a global recruitment firm delivering tailored hiring solutions—from permanent and contract recruitment to retained search.

  4+ ansCandidates need more than 4 years of progressive leadership in operations, customer success, or people operations in a fast-paced tech or professional services setting. They need experience building systems from zero, managing CSAT and NPS, and using AI automation and CRM platforms. Candidates must be legally authorized to work in Canada.

  CRM, Practice management platform, AI automation tools, Legaltech platforms

• 15j

  Production Worker, Star Truss

  Winnipeg, MB

  18,15 $/h

  QD

  Qualico Developments Canada Ltd.: is a real estate company based out of 30 SPEERS RD, Winnipeg, Manitoba, Canada.

  Qualico Developments Canada Ltd. needs workers who can stand for long periods, climb in and out of a work area about 3 feet high, and lift components up to 50 pounds. Prior truss experience is preferred but not required, and no formal training is needed.

  tape measure, truss jig

  18j

  Paint Service Technician, Empire Envelope

  Calgary, AB

  QD

  Qualico Developments Canada Ltd.: is a real estate company based out of 30 SPEERS RD, Winnipeg, Manitoba, Canada.

  1+ ansCandidates need at least 1 year of experience in insulation, drywall, taping or general construction, plus organizational and people-management experience. They also need a Class 5 driver's licence with a clean abstract, a satisfactory criminal record check, good communication and problem-solving skills, and the physical ability to kneel, crouch, lift and carry.

  Vehicle, Painting equipment

• 15j

  Machine Operator (Day Shift)

  Crossfield, AB

  26,50 $/hSur placeTemps plein

  

  Carlisle: Carlisle Construction Materials (CCM) is a diversified manufacturer and supplier of premium building products for the commercial and residential…

  Candidates need a high school diploma or GED (preferred), to be at least 18, and a strong work ethic with attention to detail. Prior manufacturing experience is preferred, along with basic math, computer and measuring skills.

  calculator, measuring devices, hand tools, computer

• 15j

  A&I Products Canada Inc. - Production Welder

  Altona, MB

  

  John Deere

  1+ ansCandidates need at least one year of welding experience in a manufacturing setting, the ability to stand, lift up to 40 lbs and repeat tasks through a full shift, and the ability to read a tape measure. Manufacturing or welding experience, a safety focus and reliable transportation are assets.

  CNC welding equipment, robotic welding equipment, manual arc welder, grinder, hoist, overhead crane

• 15j

  Senior Software Engineer, AI

  Toronto, ON

  123k–180k $/anHybrideTemps plein

  

  Pebl

  7+ ansCandidates need 7+ years of full-stack engineering, strong Postgres and TypeScript or Python skills, and at least one year building LLM or agentic products. They also need experience shipping a conversational AI interface that real users rely on.

  Postgres, AWS, Kubernetes, Lambda, React

• 16j

  Product Line Manager - Geomembrane & Specialty Market

  Truro, NS +3

  I

  IPG

  3+ ansCandidates need 3-5 years in product management, marketing, sales or a related field, plus strong negotiation, analytical and communication skills. A degree in marketing, business or engineering is preferred, and textile or polymer knowledge is an asset.

  Microsoft Office

• 18j

  Manufacturing I,Production

  Brantford, ON

  Temps plein

  ?

  To carry out the process of production & packaging in order to meet daily product demand requirements; Affix correct labels and manually date stamp boxes as required according to contents of box; During filling…

  Cleaning, Packaging, Quality control, Forklift certification, Health and safety, Reporting

• 18j

  Facilities Maintenance Maintainer

  Yellowknife, NT

  Sur placeTemps plein

  

  Air Tindi Ltd.

  Air Tindi needs candidates who can work with minimal supervision, communicate well and make sound decisions, and who have basic mechanical, plumbing, carpentry and electrical skills, tool use experience and a valid Canadian driver's licence.

  table saw, tape measure, hand tools

• 18j

  Tech I - Paint (day shift)

  Harrow, ON

  27 $/h

  I

  Integra

  Candidates need the ability to read a tape measure, strong attention to detail and the ability to lift up to 15 kg repeatedly. Communication skills, teamwork, and adaptability in a fast-paced environment are also required, with paint or sandblast experience a strong asset.

  Electrostatic paint gun, Sandblast spray nozzle, Paint booth, Overhead crane, Forklift

21 entreprises