Emplois “Machine shop equipment” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 9m

  CNC Machinist, Horizontal Boring Mill (Red Seal)

  Delta, BC

  Temps plein

  AI

  Axton Incorporated

  Pay: $45.00 to $50.00 per hour, based on experience; Shift: Day or afternoon, depending on current requirements; Manual HBM experience is a bonus, but CNC HBM experience is the priority for this role

• 9m

  Mechanical Designer & Drafter – Heavy Machinery & Industrial Equipment

  Rosenort, MB

  Temps plein

  TG

  Triple Green Products

  Location Requirement: Applicants must currently reside in Manitoba; Qualifications & Skills; Education: Diploma or Degree in Mechanical Engineering Design, Drafting Technology, or equivalent technical experience

• 22m

  Overnight Freight Associate: Part Time - WHITE ROCK

  Canada

  Sur placeTemps partiel

  

  HOME DEPOT CANADA, INC.: The Home Depot Canada is the Canadian arm of the world’s largest home improvement retailer.

  Freight Team Associates are responsible for stocking merchandise, organizing the sales floor to create a pleasant and safe shopping environment, and providing customer service as required…; Freight Team associates are…

  2h

  Overnight Freight Associate Full Time - 7038 Brandon

  Brandon, MB

  Sur placeTemps plein

  

  HOME DEPOT CANADA, INC.: The Home Depot Canada is the Canadian arm of the world’s largest home improvement retailer.

  Candidates need a high school diploma or equivalent and ideally 1 to 2 years of retail or distribution experience. Knowledge of reach trucks, forklifts and order pickers is an asset.

  Reach truck, Forklift, Order picker

  2h

  Overnight Freight Associate Part time - 7248 Whitemud

  Canada

  Sur placeTemps partiel

  

  HOME DEPOT CANADA, INC.: The Home Depot Canada is the Canadian arm of the world’s largest home improvement retailer.

  Candidates need a high school diploma or equivalent and 1 to 2 years of retail or distribution experience is an asset. Forklift or reach truck operation experience is an asset, along with strong interpersonal and organizational skills.

  reach truck, forklift, order picker

  2h

  Overnight Freight Associate: Part Time - SQUAMISH

  Squamish, BC

  Sur placeTemps partiel

  

  HOME DEPOT CANADA, INC.: The Home Depot Canada is the Canadian arm of the world’s largest home improvement retailer.

  Candidates need a high school diploma or equivalent and 1 to 2 years of retail or distribution experience is an asset. Experience operating reach trucks, forklifts or order pickers is also an asset.

  Reach truck, Forklift, Order picker

  2h

  Overnight Freight Associate Full Time - 7117 Strathcona

  Edmonton, AB

  Sur placeTemps plein

  

  HOME DEPOT CANADA, INC.: The Home Depot Canada is the Canadian arm of the world’s largest home improvement retailer.

  Candidates need a high school diploma or equivalent and ideally 1 to 2 years of retail or distribution experience. Knowledge of operating reach trucks, forklifts and order pickers is an asset, along with good interpersonal and organizational skills.

  reach truck, forklift, order picker

  3h

  Overnight Freight Associate Part Time - 7258 Lloydminster

  Lloydminster, AB

  Sur placeTemps partiel

  

  HOME DEPOT CANADA, INC.: The Home Depot Canada is the Canadian arm of the world’s largest home improvement retailer.

  Candidates need a high school diploma or equivalent and ideally 1 to 2 years of retail or distribution experience. Experience operating reach trucks, forklifts or order pickers is an asset, along with strong interpersonal and organizational skills.

  Reach truck, Forklift, Order picker

• 30m

  Mechanical Technologist

  Hamilton, ON

  60k–65k $/anTemps plein

  L

  Liburdi

  1+ ansCandidates need a Mechanical Technologist diploma, the ability to read mechanical drawings and bills of materials, and knowledge of quality control tools. Preferred experience is 1 to 5 years in tooling and mechanical equipment, and co-op experience is accepted.

  Mechanical drawings, Bills of materials, Quality control tools

• 32m

  Machine and Faberic Supervisor

  West St. Paul, MB

  

  Staffmax

  Candidates need solid machining, metal fabrication and welding experience, the ability to read engineering drawings, and prior supervision of workshop work. Precision measuring skills and hands-on experience with lathes, mills, presses and shears are required.

  Manual and CNC lathes, Manual and CNC milling machines, Pillar drills, Punch presses, Brake presses, Shears

• 32m

  Manufacturing Production Coordinator

  Delta, BC

  55k–65k $/anSur placeTemps plein

  IJ

  ISSofBC Job Shares

  2+ ansCandidates need 2+ years in production coordination, inventory control or manufacturing scheduling, 2+ years with ERP systems (Infor Visual preferred) and custom reporting (Smartviews an asset), and advanced Excel skills. Working knowledge of ISO 9001 and SOPs is required, and a post-secondary diploma in supply chain or a related field is preferred or substituted by hands-on manufacturing experience.

  Infor Visual Manufacturing ERP, Smartviews, Microsoft Excel

• 36m

  Mechanical Design Engineer

  Kelowna, BC

  Sur placeTemps plein

  MP

  Multi-Power Products Ltd.: Multi-Power is a leading Canadian manufacturer of drilling equipment.

  10+ ansCandidates need 10+ years of mobile or heavy equipment design and manufacturing experience, an engineering degree, and a Professional Engineer (P.Eng) designation in Canada. They must be proficient in SolidWorks and stress analysis by hand calculation and FEA. Hydraulic, electrical and project management knowledge are assets.

  SolidWorks, FEA software, Spreadsheets

• 2h

  General machine operator

  Vaughan, ON

  M

  Mircom

  1+ ansMircom needs candidates with a high school diploma or equivalent and 1 to 3 years of metal shop experience. Counterbalance forklift certification with at least 6 months of experience is required, along with the ability to read blueprints, lift up to 50 lbs and wear steel-toed boots.

  brake press, punch press, PEM inserter, counterbalance forklift

• 2h

  Panel Shop Wireperson

  Calgary, AB

  Temps plein

  

  Rising Edge Group

  Rising Edge Group needs candidates who can read engineering prints and shop drawings, work with hand and power tools, and work independently. Construction experience is an asset, and the candidate must be able to lift up to 50 pounds and have close, distance, peripheral vision and depth perception.

  hand tools, power tools, soldering equipment, engineering prints, shop drawings

• 2h

  Mechanical Designer

  Woodbridge, ON

  Temps plein

  MP

  MAS Precision Parts

  3+ ansCandidates need at least three years of mechanical design experience producing built parts, a post-secondary diploma or degree in engineering or a related discipline, and working proficiency in SolidWorks. They must be able to read GD&T and tolerance specifications, understand machining processes, and use precision measuring tools.

  SolidWorks, calipers, micrometers, gauges, CNC milling, CNC turning

• 2h

  Floor/Warehouse Manager – Wood Production Shop

  Exshaw, AB

  WT

  Woodpecker Timber Framing

  Woodpecker Timber Framing needs an experienced shop manager with proven leadership skills and hands-on technical knowledge of timber framing or woodworking production. Candidates should be able to manage equipment maintenance and communicate clearly across teams.

  CNC equipment, Material-handling tools, Shop vehicles

• 3h

  General Maintenance Outfitter Full Time

  Vaughan, ON

  Temps plein

  BP

  Bass Pro Shops Canada ULC

  Candidates need experience with housekeeping and general maintenance, safe use of power tools and cleaning equipment, and ideally supervisory experience. Strong attention to detail, customer service skills and the ability to work evenings and weekends are required.

  Hand tools, Power tools, Electric scrubbing machine, Rug shampooing machine, Material handling equipment

• 3h

  Machinist

  Stratford, ON

  27,41–38 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  2+ ansCandidates need 2 to 5 years of custom machining shop experience, with 3 and 4 axis CNC operation and programming. They must read blueprints and G-code, and a Licensed Machinist is preferred.

  CNC machines, Lathe, Micrometers, Verniers, Height gauges, Grinders

• 4h

  Automation - Automation Student

  Toronto, ON

  Stage

  PI

  Polytainers, Inc.

  Polytainers needs a student in a related post-secondary program such as electromechanical engineering. Candidates need good written and verbal English, mechanical aptitude and strong troubleshooting skills; machine shop or tool making experience is an asset.

  IML robots, take-out robots, stacking equipment, PPE

  4h

  Molding Maintenance - Intern

  Toronto, ON

  PI

  Polytainers, Inc.

  Candidates need to be working towards a college diploma in mechanical or industrial engineering, with mechanical aptitude and strong troubleshooting skills preferred. A millwright licence in progress is an asset, and fluent English with good communication is required.

  Hydraulic equipment, Pneumatic equipment, Molding machines, Thermoformers, IML equipment

• 4h

  Machinist (Journeyperson) - Afternoon shift

  Alberta

  Temps plein

  

  TransCanada Turbines Ltd. (white banner)

  2+ ansCandidates need journeyperson machinist experience, with Interprovincial Red Seal preferred, and 2+ years of related experience. They must read engineering drawings and blueprints, use precision measuring tools, and work shift rotations including evenings.

  Lathes, Grinders, Milling machines, CNC machines, Verniers, Micrometers

• 12h

  Shop / Welding Helper

  Calgary, AB

  Temps plein

  SW

  SPS West

  Candidates need to be reliable, safety-conscious and willing to learn from experienced tradespeople. Mechanical aptitude, the ability to read a tape measure and lift materials safely are expected; prior welding or shop experience is an asset but not required.

  Hand tools, Power tools, Tape measure, Forklift

• 13h

  Journeyman Machinist - Manual-CNC

  Edmonton, AB

  H

  HOERBIGER

  3+ ansCandidates need Journeyman Machinist certification, at least 3 years of experience setting up manual and CNC machines, and blueprint reading with GD&T. They also need forklift and overhead crane experience, strong problem-solving skills and English communication skills.

  CNC lathe, CNC mill, manual lathe, grinder, drill, precision measuring instruments

• 13h

  Power & HVAC Technician 3

  Lévis, QC

  Temps plein

  SR

  Sunbelt Rentals

  5+ ansCandidates need 5-7 years of experience maintaining pump and power equipment and EPA 608 universal certification. Advanced knowledge of refrigeration, generators, electrical controls, and hydraulic or pneumatic schematics is needed, along with fluency in English and French.

  Load bank, VFD, VSD, Hydraulic schematics, Pneumatic schematics

18 entreprises