Emplois “Read engineering drawings” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 6h

  Bridge Engineer

  Edmonton, AB +1

  TT

  Tetra Tech

  5+ ansCandidates need a civil engineering diploma or degree, P.Eng., P.L.(Eng.) or P.Tech.(Eng.) registration, and 5+ years of roadway and bridge experience in Alberta. Structural analysis software, CAN/CSA S6 design knowledge and field travel ability are also required.

  CSiBridge, MIDAS, SAP

  7h

  Senior Mechanical Engineer

  Winnipeg, MB

  TT

  Tetra Tech

  10+ ansCandidates need a mechanical engineering degree, Professional Engineer status in Manitoba or eligibility for it, and at least 10 years of design experience, with consulting experience considered critical. Federal security clearance eligibility and a valid driver's licence are also required.

  MS Word, MS Excel, MS PowerPoint, mechanical design software

• 7h

  Intermediate Electrical Designer / Drafter

  Calgary, AB

  Temps plein

  BE

  Bluestar Engineering LTD.

  6+ ansCandidates need an Electrical Engineering Technology diploma or equivalent and 6+ years of electrical and instrumentation design, with oil and gas experience required. Familiarity with CEC, NFPA and API codes, Excel and Outlook proficiency, and strong English reading and writing are also needed.

  Microsoft Excel, Microsoft Outlook

  7h

  Junior Electrical Designer / Drafter

  Calgary, AB

  Temps plein

  BE

  Bluestar Engineering LTD.

  1+ ansCandidates need 1-2 years of oil and gas drafting experience for electrical, controls and instrumentation work, plus capable AutoCAD skills. Bluestar Engineering also asks for strong English, Microsoft Excel and Outlook proficiency, and a strong work ethic.

  AutoCAD, Microsoft Excel, Microsoft Outlook

• 7h

  Journeyman Instrumentation Technician

  Battleford, SK

  45 $/hTemps plein

  PE

  PTW Energy Services Ltd.

  PTW Energy Services needs a journeyman instrumentation technician with a journeyman certificate, Red Seal preferred, and current H2S Alive, Fall Protection, First Aid and CSTS 2020 tickets. Candidates need hands-on experience with Allen-Bradley PLCs, DCS and HMI systems, and the ability to read P&IDs and electrical drawings.

  Multimeters, Loop calibrators, Oscilloscopes, CMMS, Allen-Bradley PLC, DCS

  7h

  Project Manager

  Nisku, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need prior industrial electrical or instrumentation construction experience and the ability to read electrical and instrumentation drawings, P&IDs and specifications. Strong leadership, client communication, scheduling and MS Office skills are required, and a valid Canadian driver's licence with a clean 3-year abstract.

  MS Office, scheduling software, project management software

  7h

  Journeyman Instrumentation

  Rocky Mountain House, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need a Journeyman Instrumentation Technician certificate and experience with industrial instrumentation, Allen-Bradley PLCs and DCS. Valid H2S Alive, Fall Protection, First Aid and CSTS 2020 tickets and a driver's licence are required.

  Allen-Bradley PLC, DCS, HMI, Multimeter, Loop calibrator, Oscilloscope

  7h

  Journeyman Instrumentation Technician

  Brooks, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need a Journeyman Instrumentation Technician certificate (Red Seal preferred), experience with Allen-Bradley PLCs, DCS and HMI systems, and the ability to read electrical drawings and P&IDs. Valid H2S Alive, Fall Protection, Standard First Aid, CSTS 2020 and a driver's licence are required, along with flexibility for shift work and overtime.

  Allen-Bradley PLC, DCS, HMI, Multimeters, Loop calibrators, Oscilloscopes

  7h

  Electrial Journeyperson

  Fort McMurray, AB

  52 $/hTemps plein

  PE

  PTW Energy Services Ltd.

  5+ ansCandidates need a Red Seal Journeyperson Electrician certificate and at least 5 years of industrial electrical maintenance experience. They also need H2S Alive, Fall Protection, First Aid, CSTS 2020 and a Class 5 driver's licence.

  test instruments, electrical diagnostic equipment, hand tools

  7h

  Structural Steel Welder - Afternoon Shift

  Calgary, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  2+ ansCandidates need a CWB or equivalent welding certification and 2 or more years of commercial or industrial welding experience. Strong attention to detail and safety awareness are required.

  MCAW equipment, FCAW equipment, SMAW equipment, Welding equipment

  7h

  Structural Steel Welder - Day Shift

  Calgary, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  2+ ansPTW Energy Services asks for a CWB or equivalent certified welder with 2+ years of commercial or industrial experience. Candidates need strong attention to detail and safety awareness.

  MCAW equipment, FCAW equipment, SMAW equipment

• 7h

  Shop / Welding Helper

  Calgary, AB

  Temps plein

  SW

  SPS West

  Candidates need to be reliable, safety-conscious and willing to learn from experienced tradespeople. Mechanical aptitude, the ability to read a tape measure and lift materials safely are expected; prior welding or shop experience is an asset but not required.

  Hand tools, Power tools, Tape measure, Forklift

  7h

  General Shop Labourer

  Calgary, AB

  Temps plein

  SW

  SPS West

  Candidates need reliable attendance, a safety-conscious approach and mechanical aptitude with hand and power tools. Shop experience is not required, and forklift experience and basic drawing-reading skills are assets.

  Hand tools, Power tools, Tape measure, Forklift

  7h

  Production Welder

  Calgary, AB

  Temps plein

  SW

  SPS West

  Candidates need strong TIG and MIG welding experience on carbon steel, stainless steel and aluminum, and the ability to read fabrication drawings. Journeyperson welding certification is required, along with reliability and attention to detail.

  TIG welder, MIG welder, drill, forklift

• 7h

  Field Service Technician - New Westminster

  New Westminster, BC +1

  I

  IPG

  Candidates need a high school diploma (a technical associate degree is preferred), working knowledge of electrical and mechanical systems, and hands-on tool skills. They must travel frequently, work independently in the field, and be able to lift up to 60 lbs.

  multimeter, hand tools, power tools, Microsoft Office

  7h

  Field Service Technician - Brampton

  Brampton, ON

  I

  IPG

  Candidates need a high school diploma, with an associate degree in a technical field preferred. They should have electrical and mechanical troubleshooting skills, the ability to work independently, a valid driver's licence, and the ability to lift up to 60 lbs.

  multimeter, hand tools, power tools, Microsoft Office, WAT units

• 7h

  Journeyman Machinist - Manual-CNC

  Edmonton, AB

  H

  HOERBIGER

  3+ ansCandidates need Journeyman Machinist certification, at least 3 years of experience setting up manual and CNC machines, and blueprint reading with GD&T. They also need forklift and overhead crane experience, strong problem-solving skills and English communication skills.

  CNC lathe, CNC mill, manual lathe, grinder, drill, precision measuring instruments

• 7h

  Power Generation Technician

  Dartmouth, NS

  Temps plein

  SR

  Sunbelt Rentals

  3+ ansSunbelt Rentals needs candidates with 3-5 years of experience repairing pump and power equipment, EPA 608 certification and a DOT medical card. They also need a valid driver's licence with a clean driving record, plus knowledge of generators, diesel engines, refrigeration and reading electrical and hydraulic schematics.

  generators, diesel engines, air compressors, dehumidification equipment, electrical schematics, hydraulic flow drawings

  7h

  Industrial Electrician

  Surrey, BC

  Temps plein

  SR

  Sunbelt Rentals

  Candidates need Industrial Electrician experience in commercial or industrial settings and a Red Seal Journeyperson certification. They also need strong troubleshooting skills, the ability to read schematics, and a valid driver's licence.

  PLC, VFD, generator, switchgear, hand tools

• 9h

  Project Coordinator

  Regina, SK

  Contrat

  RC

  REDDSOL CONSULTANCY SERVICES CORPORATION

  5+ ansCandidates need at least 5 years supporting IT infrastructure for construction, renovation or large projects. Preferred: a related degree, CAPM or PMP, healthcare IT project experience, and knowledge of cabling, server racks, wireless and low-voltage drawings.

• 9h

  Process Engineer – Heat Transfer & Process Equipment

  Calgary, AB

  Temps plein

  

  JP Recruitment

  5+ ansCandidates need an engineering degree, 5 to 10 years of process engineering experience, and P.Eng. registration or eligibility in Alberta, British Columbia or Saskatchewan. Strong thermal simulation, equipment sizing and knowledge of ASME, CSA and API codes are required.

  HTRI, FRNC

• 10h

  Aluminum Fabricator

  Delta, BC

  Temps plein, Contrat

  

  Express Employment Professionals: The Express franchise brand is an industry-leading, international staffing company with franchise locations across the U.S., Canada, South Africa,…

  1+ ansCandidates need at least 1 to 2 years of aluminum fabrication, metalwork or related manufacturing experience, the ability to read technical drawings, and skill with hand tools, power tools and measuring instruments. They must be able to stand for long periods, lift up to 50 lbs, and work carefully and safely.

  CNC router, saw, shears, presses, drills, grinders

• 11h

  Technical Specialist

  Toronto, ON

  Temporaire

  MO

  Ministry of Long - Term Care

  Candidates need demonstrated experience in healthcare capital planning, design, procurement and construction, plus knowledge of Ontario's health capital funding framework and facility standards. Strong analytical, negotiation, report-writing and computer skills are also required.

  Word processing software, Spreadsheets, Database management software, Internet search engines

• 11h

  Technical Services Officer

  New Liskeard, ON

  Temporaire

  MO

  Ministry of Transportation

  Candidates need knowledge of highway construction and maintenance engineering, construction safety, contract and tender legislation, and financial reporting. They must read contract documents and plans, write technical reports, negotiate contract language, and use AutoCAD and spreadsheet software. A valid class G driver's licence is mandatory.

  AutoCAD, spreadsheet software

12 entreprises