Emplois “conveyor equipment” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 7m

  Commercial Food Equipment Service Technician

  Ottawa, ON

  

  Carleton University

  If a Continuing employee is the successful candidate, this assignment will be considered a Term Assignment, and the successful candidate must obtain a leave of absence from their current…; Permission for such leave…

• 12m

  Mechanical Plant Supervisor

  Geraldton, ON

  Temps plein

  EG

  Equinox Gold Corp.

  5+ ansEquinox Gold Corp. needs 5+ years maintaining heavy process plant equipment such as crushers, ball mills, pumps, conveyors and gearboxes, plus a Red Seal Industrial Mechanic (Millwright) certification. Strong safety leadership, organization, communication and general computer skills are required.

  SAP, Microsoft Office

  17m

  Career Opportunities: Operator, Crusher (1691)

  Grand Falls-Windsor, NL

  Temps plein

  EG

  Equinox Gold Corp.

  5+ ansCandidates need at least 5 years of processing or crushing plant operating experience, including 2 years in mining, and a high school diploma or equivalent. They also need mechanical aptitude, computer skills, and a valid driver's licence with a driver's abstract.

  crusher, feeder, conveyors, process plant applications, small motorized equipment

• 12m

  Maintenance - Millwright

  Port Colborne, ON

  Temps plein

  A

  ADM

  2+ ansCandidates need about two years of journeyman or apprentice experience, a strong mechanical background, and skills in alignment, hydraulics, welding and blueprint reading. A safe work record, good English communication and physical fitness are also required.

  Lift trucks, Hoists, Microsoft Office Suite

  12m

  Maintenance - Electrician

  Port Colborne, ON

  Temps plein

  A

  ADM

  Candidates need a 442A Industrial or 309A Construction and Maintenance trade certificate, strong electrical and mechanical skills, and PLC or VFD experience (an asset). They must be physically fit, able to work at heights and lift up to 55 lbs, and work in hot, cold, wet or dusty conditions.

  PLC, VFD, Ladder logic diagrams, Computers

• 12m

  Ramp Services Agent YWG

  Winnipeg, MB

  Temps partiel

  S

  Swissport

  Candidates need a valid driver's licence, good spoken English, and the ability to lift up to 70 pounds and work outdoors in bad weather. Previous ramp experience is an asset, along with strong health and safety awareness and flexibility to work any shift.

  tow tractor, tow bar, belt loader, container loader, baggage tug, water/lavatory service truck

• 22m

  Expression of Interest: Mechanical Engineers Red Chris Block Cave

  Dease Lake, BC

  Temps plein

  NC

  Newmont Corporation

  8+ ansCandidates need a mechanical engineering degree, a current P.Eng. with EGBC, and at least 8 years of mining or heavy industrial experience. Strong knowledge of mineral processing equipment, tender packages and cross-team collaboration is required.

• 22m

  Maintenance Clerk - Afternoons

  Vaughan, ON

  Temps plein

  GC

  GLS Canada

  Candidates need a valid driver's licence, good physical condition for manual work, manual dexterity and mechanical aptitude, and the ability to troubleshoot independently. Attention to detail and comfort in a fast-paced, changing environment are also expected.

  hand tools, conveyor equipment, garage doors, ropaks, logistics bars

• 22m

  TECHNICAL MAINTENANCE

  Calgary, AB

  Temps plein

  HD

  Humpty Dumpty Snack Foods

  5+ ansCandidates need at least 5 years as a journeyman millwright, preferably in manufacturing, with welding, machining and troubleshooting skills. They must be able to lift up to 50 lbs repeatedly, work safely with minimal supervision, and follow food safety and GMP standards.

  PMC, PLC, hand tools, power tools, Polaris vertical form fill and seal machines, fryers

• 22m

  Seasonal - Inbound Processing

  Cambridge, ON

  Temps plein

  MC

  Moores Clothing

  Candidates need experience receiving merchandise in a fast-paced environment, good math and time management skills, and the ability to follow instructions and work independently. They must be able to lift up to 50 pounds, stand for long periods, and work flexible shifts.

  RF gun, Conveyor systems, Sorter systems, Tape dispensers

• 47m

  Saw operator - sawmill

  Senneterre, QC

  Temps plein

  J

  JobsMedia.io

  3+ ansCandidates need 3 to less than 5 years of sawmill or related experience and an other trades certificate or diploma. They must be available for shift or on-call work and be able to check that products meet quality standards.

  automated lumbermill equipment, control console, conveyor system, saw equipment

  57m

  Plastics-processing machine setter

  Lévis, QC

  Temps plein

  J

  JobsMedia.io

  3+ ansCandidates need 3 to less than 5 years of experience or equivalent experience, plus a trades certificate or diploma. Strong attention to detail, manual dexterity and the ability to work with minimal supervision are needed.

  moulding machine, forklift

  57m

  Sawing machine operator - sawmill

  Saint-Félicien, QC

  Temps plein

  J

  JobsMedia.io

  3+ ansCandidates need a trades certificate or diploma and 3 to 5 years of experience, and the posting asks whether they have worked in this field. They must be able to work safely around sawmill machinery and to a schedule that includes evenings and nights.

  sawmill equipment, conveyor system, control console, saws

• 1h

  READY-MIX TRUCK DRIVERS (THUNDER BAY)

  Ontario

  Temps plein

  FW

  Fisher Wavy Inc.

  1+ ansCandidates need a valid AZ or DZ driver's licence with a clean abstract and CVOR, at least one year of ready-mix or commercial vehicle road experience with a multi-speed transmission, and prior experience with on-board conveyor systems. A strong commitment to safety and teamwork is required, and concrete experience and a high school diploma are assets.

  concrete pump, conveyor belt system, concrete chute, ready-mix truck

• 1h

  Contingent - IT/IS/MIS

  Mississauga, ON

  Stage

  GC

  Garland Commercial Ranges

  Candidates need a diploma or degree in computer science or a related field, some basic IT support experience, and strong knowledge of PCs, servers and operating systems. They must have good attention to detail, communication and problem-solving skills, and be able to work under close supervision.

  helpdesk ticketing system, security portal

  1h

  Tech Service Specialist VII - Commercial Food Equipment

  Mississauga, ON

  Temps plein

  GC

  Garland Commercial Ranges

  3+ ansGarland Commercial Ranges needs candidates with an associate or technical degree in engineering and 3+ years of experience. Strong gas and electrical knowledge, the ability to read wiring diagrams and service manuals, heavy computer use, and clear verbal and written communication are essential.

  MS Office, Excel, Word, Outlook, CPS system

• 1h

  Maintenance Mechanic

  Burlington, ON

  Temps plein

  

  Hood Packaging Corporation: Hood Packaging is a quality manufacturer of packaging materials with 23 production facilities located in the United States and Canada.

  3+ ansCandidates need a Red Seal 433A Industrial Millwright Mechanic certification, at least three years in a manufacturing environment, and a solid grasp of mechanical, electrical, pneumatic and hydraulic systems. Strong troubleshooting, CMMS experience, blueprint reading and comfort with 12-hour shifts are also required.

  CMMS, hand tools, power tools, welding equipment, machining equipment

• 1h

  General Labourer - Meat Processing

  Innisfail, AB

  Temps plein

  WM

  Westfine Meats Inc.

  Candidates need attention to detail, reliability, the ability to lift 50 lbs, and comfort working in heat, cold, loud noise and PPE on a team. No formal education is required, and prior meat processing or butcher experience is an asset.

  Strapper, Conveyor, Cardboard boxes, PPE

• 11h

  MAINTENANCE TECHNICIAN L2

  Kingsville, ON

  25–28 $/hTemps plein

  

  Mucci Farms Inc

  3+ ansMucci Farms needs candidates with at least 3 years of related maintenance experience, high school completion, and prior experience with preventive maintenance software and varied machinery. A safety-first mindset, clear English communication and the ability to work independently are required. A technical diploma or apprenticeship and Spanish are assets.

  Preventive maintenance software, Hand tools, Power tools, Forklift, Scissor lift, Skyjack

• 14h

  Specialist, Maintenance Planning

  Toronto, ON

  Temps plein

  

  Quantum Lifecycle Partners LP

  3+ ansQuantum Lifecycle Partners needs candidates with three or more years of maintenance planning or industrial maintenance experience. They should know CMMS platforms, preventive and corrective maintenance, and basic HVAC, electrical and mechanical systems, and be proficient in Microsoft 365.

  CMMS, Microsoft Excel, Microsoft Teams, Microsoft Dynamics Business Central, Power BI, forklift

  14h

  Specialist, Maintenance Administrator

  Toronto, ON

  Temps plein

  

  Quantum Lifecycle Partners LP

  3+ ansCandidates need at least three years of maintenance planning or coordination experience, including use of a maintenance work-order system. They also need knowledge of preventive and corrective maintenance, basic HVAC, electrical, and mechanical knowledge, and strong Microsoft 365 skills, especially Excel.

  CMMS, Microsoft Excel, Microsoft Outlook, Microsoft Word, Microsoft Teams, Microsoft Dynamics Business Central

• 15h

  Millwright - Maintenance

  Tillsonburg, ON

  Temps plein

  WG

  WGI Group

  Candidates need an industrial millwright or mechanic qualification, or equivalent experience, plus hands-on industrial maintenance experience in manufacturing. Practical electrical troubleshooting and welding skills are assets.

  Extruders, Corrugators, Conveyors, Blenders, Grinders, Blowers

  15h

  Millwright - Maintenance

  Walkerton, ON

  Temps plein

  WG

  WGI Group

  Armtec needs candidates with an industrial millwright or mechanic qualification, or equivalent experience, and hands-on industrial maintenance experience in manufacturing. Strong mechanical and practical electrical troubleshooting skills and the ability to read drawings are required.

  forklift, extruder, corrugator, conveyor, blender, grinder

• 23h

  Millwright industrial

  Golden Lake, ON

  Temps plein

  BH

  Ben Hokum and Son Limited

  2+ ansCandidates need an industrial mechanic (millwright) trade certification or equivalent experience, plus about 2 to 3 years of experience. They should be skilled in troubleshooting, welding (OAW and SMAW), machinery repair and CMMS, and have their own vehicle and tools.

  CMMS, oxy-acetylene welding equipment, shielded metal arc welding equipment, power tools, hand tools, conveyor

17 entreprises