Emplois “electronic communications test equipment” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 4m

  Machine Vision Engineer

  Windsor, ON

  Temps plein

  FC

  Forge Consulting Group

  1+ ansQualifications & Requirements; Diploma or degree in Mechatronics, Electrical Engineering, Computer Engineering , or a related technical field; Strong interest or experience in machine vision, automation, robotics, or…

  Inspection, Packaging, Technical support, Troubleshooting, Mechatronics, Electrical engineering

• 18m

  Radio Frequency Engineer

  Brantford, ON

  Temps plein

  HH

  Humani HR

  8+ ansCandidates need a bachelor's degree in electrical or electronics engineering, at least 8 years of RF experience with hands-on antenna work, and skill with electromagnetic simulation and RF test equipment. Controlled Goods certification is required, and they must be available to work onsite in Brantford.

  Ansys HFSS, CST Studio Suite, Altair FEKO, vector network analyzer, spectrum analyzer, signal generator

• 18m

  Concepteur matériel

  Montréal, QC

  Temps plein

  OT

  Orthogone Technologies Inc.

  Candidates need a bachelor's or master's in electrical engineering or equivalent and solid expertise in complex high-speed PCB design. Knowledge of integrated circuits, PCB tools, lab test equipment and communication protocols is required, with ASIC/FPGA and analog design experience as assets.

  Oscilloscope, Logic analyzer, Spectrum analyzer

• 25m

  Electrical Engineering Co-Op

  Calgary, AB

  Temps plein

  EI

  Ecolab Inc.

  Candidates need current enrolment in an electrical, mechatronics or computer engineering program, plus C programming and circuit design knowledge. Experience with oscilloscopes and multimeters, and strong written and verbal communication, are required.

  Altium Designer, AutoCAD Electrical, oscilloscope, multimeter, PLC

• 33m

  Electronic Specialist

  Montréal, QC

  Temps plein

  MG

  Media Graph Inc.

  3+ ansCandidates need a bachelor's degree in electronic, electrical or mechatronics engineering and at least 3 years of experience in electronics design or embedded systems. Strong knowledge of microcontrollers, switching power supplies, high-power LEDs and communication protocols is required.

  Oscilloscope, Multimeter, Logic analyzer

• 33m

  Senior Low Voltage & Security Systems Technician

  Kelowna, BC

  Temps plein

  OS

  Omega Solutions

  Candidates need proven hands-on experience in security, telecommunications, networking or low-voltage installation, strong troubleshooting skills and a good understanding of IP networks. A valid Class 5 driver's licence and the ability to travel for projects are required.

  IP CCTV systems, access control systems, VoIP systems, network switches

• 43m

  Développeur logiciel

  Québec, QC +1

  Temps plein

  

  Ericsson

  5+ ansBaccalauréat ou plus en informatique, télécommunications ou génie électronique; 5 à 6 ans d'expérience en développement logiciel; 3 ans et plus en C/C++ ou Golang, Linux et réseaux IP

  Golang, C/C++, Python, Java, Kubernetes, Docker

• 49m

  Senior Electro-Optical Validation Engineer

  Kanata, ON

  Temps plein

  I

  Inpho

  8+ ansCandidates need 8+ years of hands-on high-speed electrical, RF or electro-optical experience, including IMDD and PAM4 testing and InP component validation. They also need strong Python or MATLAB data analysis skills, expertise setting up high-speed test equipment, and a degree in electrical engineering, engineering physics or a related field.

  Keysight, Anritsu, Python, MATLAB, Pandas, Plotly

• 49m

  Mechanical Engineer

  Mississauga, ON

  Temps plein

  N

  Noratel

  Candidates need a bachelor's degree in mechanical engineering or a related field and proficiency in 3D CAD and 2D drafting, with Autodesk Inventor preferred. Experience with FEM or thermal simulation, design for manufacturing, technical writing and strong communication across cultures are required; Spanish and IEC, UL or CSA standards knowledge are assets.

  Autodesk Inventor, Sage500

• 49m

  Director of Engineering

  Calgary, AB

  Temps plein

  GT

  GNO-SYS Technology

  10+ ans5+ gestionCandidates need a bachelor's degree or higher in an engineering discipline, a P.Eng. with APEGA or eligibility to register, and at least ten years of progressive sensor or aerospace experience, five of them leading teams. They must have taken airborne or field-deployed sensor systems from design through deployment, and be able to scope and deliver fixed-price projects.

  Python, C/C++, Linux, CAD tools, electronics design tools

• 1h

  Ingénieur(e) En Firmware / Firmware Engineer

  Montréal, QC

  45–60 $/hContrat

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  5+ ansMinimum de 5 ans en développement de firmware et C embarqué; Minimum de 5 ans avec microcontrôleurs, bare metal ou RTOS; Expérience STM32 et développement de bootloaders

  STM32, Keil, CAN bus, VHDL, FPGA

  1h

  Electrical Engineer

  North Vancouver, BC

  50–58 $/hContrat

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  5+ ansCandidates need a relevant engineering bachelor's degree, 5+ years of engineering experience, and a P.Eng. or Incorporated Engineer designation, with P.Eng. or E.I.T. status preferred in BC. They need strong technical writing, AutoCAD, MRP and Microsoft Office skills, and the ability to work without direct supervision.

  AutoCAD, MRP systems, Microsoft Excel, Microsoft Word, Microsoft PowerPoint, Microsoft Outlook

• 1h

  Instrumentation & SCADA Support Operator

  Kitchener, ON

  

  Ontario Clean Water Agency

  Ontario Clean Water Agency needs candidates with an Instrumentation and Control technical credential or Certificate of Qualification, or an Industrial/Commercial Electrician equivalent. Extensive experience with instrumentation, calibration, PLC troubleshooting, SCADA and medium voltage is required, along with a valid Class G driver's licence.

  SCADA, PLC, Lucity CMMS, calibration equipment

• 2h

  Utility transport aide

  Toronto, ON

  27,76–28,31 $/hTemps partiel

  HR

  Humber River Regional Hospital

  2+ ansHumber River Regional Hospital needs candidates with two years of recent hospital medical or surgical supply experience, MDR or Sterile College certification, and Grade 12 or equivalent. Candidates must know infection prevention standards and be able to lift 25 to 30 pounds repeatedly.

  Flusher disinfector, Arjo Tornado, Arjo Typhoon, RTLS, Meditech, Ascom phone

• 2h

  Junior Technical Solutions Specialist (Recent Graduates)

  Toronto, ON

  Temps plein

  H

  Hytera

  Hytera needs candidates with a completed or nearly completed bachelor's or master's degree in a technical field. They should have basic knowledge of communications, IP networking or electronics, strong problem-solving skills, fluent English, and Canadian work authorization. Mandarin is an asset.

  Servers, Dispatch systems, User terminals

• 2h

  Technicien(ne) paie et avantages sociaux

  Sherbrooke, QC

  Temps plein

  CR

  Champlain Regional College

  3+ ansDEC avec champ de spécialisation approprié ou AEC reconnue; Minimum de trois ans d'expérience pertinente, idéalement en éducation; Communication orale et écrite en français, fonctionnel en anglais

  Office 365, payroll software, benefits software

• 2h

  Analyse de défaillance - Ingénieur métallurgiste / Failure analysis - Metallurgical engineer

  Longueuil, QC

  Temps plein

  

  RTX

  5+ ansBaccalauréat en génie des matériaux ou équivalent; Minimum de 5 ans d'expérience en analyse de défaillance; Expérience en microscopie optique et électronique à balayage

  Materials science, Non-destructive testing, Collaboration, Optics, Electronics, Machining

• 2h

  HEAVY CRANE TECHNICIAN OR APPRENTICE TECHNICIAN 310T

  Canada

  Temps plein

  RC

  Regional Crane Rentals Ltd

  Regional Crane Rentals Ltd. requires a valid 310T Truck and Coach Technician certification, or apprentice level 2 or 3, along with a valid driver's licence. Candidates need strong mechanical and troubleshooting skills, the ability to read technical manuals, and the physical ability to lift, climb and work outdoors year-round.

  diagnostic software, hand tools

• 2h

  QA Inspector- Electronics Hybrids

  Etobicoke, ON

  Temps plein

  NT

  Nanowave Technologies Inc.

  1+ ansCandidates need at least one year of quality inspection experience in hybrid circuits or semiconductor manufacturing, plus a high school diploma and a quality certification. They must read MILSPEC drawings, know MIL-STD-883 and AS9100/ISO 9001, and be legally authorized to work in Canada without sponsorship.

  high-power microscope, hybrid inspection equipment, Excel

• 2h

  Site IT Specialist

  Delta, BC

  Temps plein

  

  Rubicon Organics

  Keep endpoint protection, secure web access, and remote monitoring agents healthy, perform first-level alert triage, escalate suspected security incidents, and support containment as…; Coordinate the installation,…

• 3h

  EIC Measurement Technician

  Canada

  Temps plein

  TP

  TransCanada PipeLines Limited

  2+ ansCandidates need a high school diploma and either three years of an applicable trades program or two years of technical training plus two years of relevant experience. A valid Class 5 licence, a clean pre-employment medical and drug screening, and strong troubleshooting and communication skills are required.

  SAP, PLC, flow computer, gas chromatograph, gas quality analyzer, transmitter

• 3h

  Electrical Engineering Co-Op

  Calgary, AB

  Temps plein

  CC

  (CAN) CoolIT Systems Inc.

  Candidates need current enrolment in Electrical, Mechatronics or Computer Engineering, C programming experience and knowledge of circuit design. Hands-on use of oscilloscopes and multimeters and strong communication skills are also required.

  Oscilloscope, Multimeter, Altium Designer, AutoCAD Electrical, PLC

• 4h

  Biomedical Equipment Technologist

  Edmonton, AB

  

  MIC Medical Imaging: Saskatchewan, Grey Nuns, Mazankowski Heart Institute, Royal Alexandra, Stollery Children’s, Strathcona Community, Sturgeon General, Leduc Community…

  2+ ansMIC Medical Imaging needs candidates with at least 2 years of diagnostic imaging service experience and electronics training. Strong troubleshooting, communication and documentation skills are required, and a valid driver's licence with a reliable vehicle is mandatory.

  PACS, DICOM, test equipment, hand tools

• 4h

  Field Service Representative

  British Columbia

  Temps plein

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  6+ ansCandidates need a Bachelor's in Electrical Engineering with 6+ years of experience, or a certified Communications/Electronics Technician qualification with 8+ years of hands-on experience. They also need strong electrical troubleshooting skills, a valid driver's licence, and a passport.

  multimeter, oscilloscope, multifunction process calibrator, hand tools, power tools

23 entreprises