Emplois “laser cutting equipment” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 4h

  Senior Quality Inspector (Semiconductor & Photonics)

  Kanata, ON

  Temps plein

  I

  Inpho

  5+ ansCandidates need a diploma or degree in electronics, materials science or a related technical field, or equivalent experience, plus at least 5 years in the semiconductor industry. Hands-on microscopic inspection, defect identification, ESD and cleanroom practice, and documentation skills are required.

  Optical microscope, AOI system, Digital imaging system, Precision measurement equipment, Epicor

  5h

  Equipment Engineer (Semiconductor & Photonic)

  Halifax, NS

  Temps plein

  I

  Inpho

  3+ ansInpho needs candidates with a bachelor's degree in electrical, mechanical, optical engineering or physics and 3 to 7+ years of hands-on experience with electro-optical test, pick and place or inspection equipment. Candidates need knowledge of lasers, optics, machine vision and electromechanical troubleshooting.

  Automated pick and place machines, Automated optical inspection (AOI) systems, Machine vision systems

  10h

  Senior Electro-Optical Validation Engineer

  Kanata, ON

  Temps plein

  I

  Inpho

  8+ ansCandidates need 8+ years of hands-on high-speed electrical, RF or electro-optical experience, including IMDD and PAM4 testing and InP component validation. They also need strong Python or MATLAB data analysis skills, expertise setting up high-speed test equipment, and a degree in electrical engineering, engineering physics or a related field.

  Keysight, Anritsu, Python, MATLAB, Pandas, Plotly

  16h

  Junior Electro-Optical Validation Engineer

  Kanata, ON

  Temps plein

  I

  Inpho

  Candidates need a Bachelor's or Master's degree in electrical engineering, engineering physics, or a related field, with 0 to 2 years of experience. Python skills for data analysis and automation are required, and exposure to lab instruments, S-parameters, and semiconductor devices is an asset.

  Python, Pandas, NumPy, Plotly, Matplotlib, Oscilloscope

• 6h

  Laser Field Service Technician (100% Travel) (35428)

  Toronto, ON

  Temps plein

  AR

  Activ8 Recruitment & Solutions

  Candidates need experience troubleshooting industrial machinery, with laser cutting experience highly preferred, plus mechanical and electrical knowledge. A valid driver's licence, comfort working at heights, the ability to lift 50 lbs and the eligibility to enter government facilities are required.

  Multimeter, Oscilloscope, Electrical schematics, Mechanical drawings

• 7h

  Fabrication Production Supervisor

  Concord, ON

  Temps plein

  MT

  Modern Technical Staffing Inc.

  Candidates need a manufacturing or engineering background and hands-on knowledge of metal fabrication, including welding, grinding, drilling and forming. They must read engineering drawings, have experience leading hourly production staff, and understand safety, quality systems and ISO 9001.

  CNC lathe, CNC milling machine, brake press, dies, punches, fixtures

• 8h

  Manufacturing Engineer

  Saint-Hyacinthe, QC

  Temps plein

  HT

  Hydraulic Technologies

  2+ ansCandidates need at least 2 years of experience in manufacturing, manufacturing engineering, industrial engineering or process improvement, plus a good understanding of machining, laser cutting, welding, bending, finishing and painting. Skills needed include 3D CAD, reading technical drawings, Lean Manufacturing and continuous improvement, and problem-solving.

• 8h

  Field Services Engineer

  Montréal, QC

  Temps plein

  DH

  DISCO HI-TEC AMERICA, INC.

  3+ ansDISCO Hi-Tec America needs candidates with 3-6 years of hands-on electro-mechanical repair or semiconductor experience, and a bachelor's degree is preferred. English is required, French is a strong asset, and unrestricted work authorization in Canada and the U.S. is mandatory.

  CAD, MS Office, lab instrumentation

• 9h

  Mechanical Drafter - Automotive

  Toronto, ON

  Temps plein

  IG

  INKAS® Group

  3+ ansCandidates need a diploma or degree in mechanical engineering technology, drafting or a related field, plus at least 3 years of mechanical drafting or sheet metal experience. Strong AutoCAD skills and knowledge of press brake and laser cutting processes are required.

  AutoCAD, Siemens NX, SolidWorks, BySoft, PDM system, press brake

• 11h

  Senior Photonics Simulation Engineer:

  Ottawa, ON

  Temps plein

  A

  Averro

  4+ ansAverro needs candidates with a PhD in physics, electrical engineering, optics or photonics, or a master's degree with 4+ years of integrated-photonics experience. They must know guided-wave optics, photonics simulators and Python scientific computing, plus hands-on optical testing.

  RSoft, Lumerical, Python, NumPy, SciPy, Matplotlib

• 14h

  North York - Overnight Laser Cutting Operator

  Ontario

  20,50 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least one year of industrial laser cutting experience, experience with Trotect SP 1500 or PS400 machines, and CAD/CorelDRAW skills. They must also pass a criminal record check and work well in a fast-paced environment.

  Trotect SP 1500, Trotect PS400, CorelDRAW, AutoCAD

  2j

  Brake Press Operator

  Woodstock, ON

  24–28 $/hTemps plein

  

  Randstad Canada

  2+ ansCandidates need at least 2 to 3 years of hands-on brake press or metal fabrication experience, and must be able to read blueprints and use precision measuring tools. A high school diploma is required, and forklift certification and CNC or laser cutting experience are assets.

  hydraulic brake press, CNC brake press, overhead crane, counterbalance forklift, vernier calipers, micrometers

  4j

  Laser Cutting Operator - North York

  Ontario

  19–20,50 $/hContrat

  

  Randstad Canada

  1+ ansCandidates need at least one year of industrial laser cutting experience, plus experience with Trotect SP 1500 or PS400 machines and CAD or CorelDRAW software. They must be able to inspect dimensions, troubleshoot minor machine issues, work at a fast pace, speak English and collaborate well. A clear criminal record check is required.

  Trotect SP 1500, Trotect PS400, AutoCAD, CorelDRAW, Laser cutting machine

• 16h

  Photonics Engineer

  Toronto, ON

  Temps plein

  WS

  WORLD STAR TECH

  Candidates need a Bachelor's or Master's in engineering, physics or a related field, hands-on experience with lasers and photonic assemblies, and skill in precise optical alignment. AutoCAD is required, Zemax is an asset, and strong English communication and Canadian work eligibility are needed.

  AutoCAD, Zemax

• 17h

  Machine Operator

  Ponoka, AB

  28 $/hSur placeTemps plein

  

  Morskate Manufacturing: Steel fabrication company hiring skilled talent. Send resumes to [email protected]

  Candidates need to read drawings and procedures, understand metals and perform accurate measurements and calculations. They must be physically fit, able to lift 50 lbs and stand for long periods, and speak and write clear English. Laser cutting experience is an asset.

  tape measure, square, level, angle finder, drill press, laser table

• 1j

  Assistant Professor, Department of Geology

  Thunder Bay, ON

  Temps plein

  LU

  Lakehead University

  Candidates need a PhD in Geology or a closely related discipline, a record of research and teaching excellence, and the willingness to teach outside their specialty. Experience with experiential learning and field-based research is an asset.

  ICP-MS, ICP-OES, FESEM-EDX, XRD, TEM, XPS

• 1j

  IT Coordinator

  Port Coquitlam, BC

  70k–80k $/anTemps plein

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  4+ ansCandidates need 4 to 7 years of IT support experience, ideally in manufacturing or industrial settings, with hands-on ERP, networking and cybersecurity exposure. A bachelor's degree or diploma in IT or a related field, or equivalent practical experience, is required, and certifications such as CompTIA Network+, Security+, CCNA or MCSA are an asset.

  Epicor, Microsoft 365, Google Workspace, SolidWorks, AutoCAD, SigmaNEST

• 1j

  Industrial Maintenance Mechanic | Millwright (433A)

  Brant, ON

  TI

  Tigercat Industries

  Candidates need an Ontario Millwright licence and previous industrial millwright experience, plus mathematical aptitude and strong hydraulic, electrical, mechanical and diesel troubleshooting skills. A G2 Gas Technician certification is an asset.

  CNC machines, Lathes, Boring mills, Brake presses, Laser cutting machines, Plasma cutting machines

  2j

  Laser Operator

  Brant, ON

  TI

  Tigercat Industries

  Candidates need previous experience operating and maintaining metalworking machinery, mechanical ability, and skill reading engineering documents, tape measures and measuring tools. Comfort standing, climbing and kneeling, and adapting to changing conditions, are also needed.

  laser cutting machine, overhead crane, vacuum lift, precision measuring tools, tape measure, hand tools

  2j

  Industrial Maintenance Mechanic - Millwright 433A

  Cambridge, ON

  TI

  Tigercat Industries

  Candidates need an Ontario Millwright licence and prior industrial millwright experience. Mathematical aptitude, hydraulic, electrical and mechanical troubleshooting skills, and teamwork are needed; a G2 gas technician certificate is an asset.

  CNC machines, Brake press, Boring mill, Lathe, Crane, Jacks

• 5j

  Mechanical Engineering Technician

  Oakville, ON

  80k $/anTemps plein

  

  Gastronomous Technologies Inc.

  1+ ansCandidates need a one- to two-year college or CEGEP mechanical engineering technology credential and 1 to 2 years of hands-on experience with robotic or automated electromechanical systems. Proficiency in SolidWorks and other CAD software, plus food-grade fabrication and stainless steel knowledge, is required.

  SolidWorks, MS Project, CAD software, sheet metal equipment, laser cutting equipment, welding equipment

• 5j

  Metal Additive Manufacturing Research Officer

  Winnipeg, MB

  

  National Research Council Canada

  2+ ansCandidates need a PhD in Materials Science or Mechanical Engineering, or a Master's in Engineering with relevant research experience. They also need two to five years of significant experience in metal additive manufacturing, digital data analysis and research project planning.

  Metal additive manufacturing equipment, Statistical software

• 5j

  Survey Crew Chief (Grande Prairie, Edmonton, and Calgary, AB)

  Calgary, AB +2

  Temps plein

  GR

  GLOBAL RAYMAC SURVEYS

  1+ ansGlobal Raymac Surveys needs candidates with 1 to 5 years of experience as a survey crew chief or in a similar field geomatics role, preferably in pipeline or oil and gas. They need a geomatics diploma or degree or equivalent experience, Trimble GNSS skills, a valid driver's licence and a clean driver's abstract.

  Trimble GNSS, Trimble Pipeline Module, total station, drone, GPS

• 5j

  National Manager – National Dental Innovations (NDI)

  Toronto, ON +1

  Temps plein

  

  Clarion Medical Technologies

  7+ ans2+ gestionCandidates need a post-secondary diploma or degree, at least seven years of sales territory management and four years as a sales consultant in Canada, plus two years in senior territory management. They also need a proven record managing a $2.5M+ territory, leadership experience, and knowledge of the Canadian dental market.

  Microsoft Office, CRM systems

17 entreprises