Emplois “welding gloves” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 43m

  Arrow Off Road Cambridge – Invitation-Only Welder Hiring Event

  Cambridge, ON

  23–35 $/hTemps plein

  

  Arrow: Arrow Machine and Fabrication Group is an engineering-focused solution provider of machined castings, fabrications, and assemblies.

  3+ ansCandidates need at least 3 years of MIG welding experience and must pass a hands-on welding test at the invitation-only event. They must bring a printed resume and their own welding gear.

  MIG welder, welding helmet, welding gloves, safety shoes, coveralls

• 2j

  Welder-Fabricator

  Camrose, AB

  Temps plein

  PP

  PERMA PIPE INC

  5+ ansCandidates need a Red Seal welding certificate, five years of welding experience, and the ability to fabricate from blueprints and specs. They also need to be authorized to work in Canada, pass a drug test, and handle 10-hour shifts on their feet.

  welding equipment, fabrication tools, straightedges, templates

  8j

  Maintenance Tech

  Camrose, AB

  26–28 $/hTemps plein

  PP

  PERMA PIPE INC

  Candidates need hands-on mechanical and electrical maintenance skills, the ability to read blueprints and schematics, and experience with machine tools such as lathes, grinders and welders. They must pass a drug test, work 10-hour shifts with frequent standing and walking, and commit to safety.

  lathe, grinder, welder, hand tools, hydraulic equipment, PPE

  29j

  General Labour

  Camrose, AB

  Contrat

  PP

  PERMA PIPE INC

  Candidates need to be authorized to work in Canada, reliably commute to Camrose, and pass a pre-employment drug test. They must be able to stand and walk for most of a 10-hour shift, lift up to 50 lbs, and work in industrial conditions with PPE; experience is an asset but not required.

  forklift, pipe coating equipment, foam equipment

• 3j

  Journeyperson Heavy Equipment Technician

  Edmonton, AB

  Temps plein

  SG

  Sokil Group of Companies

  Candidates need a Journeyperson certification and CVIP certification, hands-on skill with hand and diagnostic tools, and the ability to read schematics. Strong problem-solving, physical stamina for heavy lifting, and steel-toed boots and a full tool set are required.

  Diagnostic equipment, Hand tools, Power tools, Welding equipment, Forklift, Heavy-duty truck

• 3j

  Operations Shop Hand

  Calgary, AB

  Temps plein

  CU

  Carbon Upcycling Technologies

  1+ ansCandidates need 1 to 3+ years of general or skilled labour experience in construction, testing or industrial settings. Mechanical, welding, millwright or equipment operation experience is an asset, and they must lift up to 50 lbs and work in full PPE.

  forklift, Office 365

• 4j

  Maintenance Mechanic - Days

  Newmarket, ON

  BM

  BUCHNER MANUFACTURING INC

  Candidates need strong mechanical skills, PLC programming and conventional machining and grinding experience. Blueprint reading, precision measuring and the ability to work independently or in a team are also required, while pneumatics, hydraulics and forklift certification are assets.

  PLC, Lathe, Milling machine, Micrometer, Forklift, Stamping press

  4j

  Maintenance Mechanic - Afternoons

  Newmarket, ON

  BM

  BUCHNER MANUFACTURING INC

  Candidates need strong mechanical skills, PLC programming and the ability to read blueprints for milling and lathing. Experience with precise measuring tools, conventional machining and grinding is needed, and pneumatics, hydraulics and forklift certification are assets.

  PLC, lathe, milling machine, micrometer, forklift, stamping press

• 7j

  MIG Welder

  Barrie, ON

  25–35 $/hContrat

  

  Randstad Canada

  Candidates need experience MIG welding mild steel, the ability to weld in flat, horizontal, vertical and overhead positions, and their own weld helmet and gloves. Welding tickets are not required.

  Cutting torch, Weld helmet

  14j

  MIG Welder

  Barrie, ON

  25–35 $/hContrat

  

  Randstad Canada

  Candidates need experience MIG welding mild steel, the ability to weld in flat, horizontal, vertical and overhead positions, and their own weld helmet and gloves. Welding tickets are not required.

  Cutting torch, Weld helmet

  21j

  MIG Welder

  Barrie, ON

  25–35 $/hContrat

  

  Randstad Canada

  Candidates need experience MIG welding mild steel, the ability to weld in flat, horizontal, vertical and overhead positions, and their own weld helmet and gloves. Welding tickets are not required.

  Cutting torch, Weld helmet

  23j

  MIG Welder

  Barrie, ON

  25–35 $/hContrat

  

  Randstad Canada

  Candidates need experience MIG welding mild steel, the ability to weld in flat, horizontal, vertical and overhead positions, and their own weld helmet and gloves. Welding tickets are not required.

  Cutting torch, Weld helmet

• 9j

  Machine Operator

  Goderich, ON

  24,60 $/hTemps plein

  CS

  Calhoun Super Structures

  Candidates need previous manufacturing equipment experience preferred, and steel fabrication or CNC experience is an asset. They must read basic drawings, use measuring tools, troubleshoot basic mechanical problems and work safely.

  CNC machines, saws, drills, presses, plasma table, roll-forming equipment

  9j

  Welder

  Goderich, ON

  24,60–26 $/hTemps plein

  CS

  Calhoun Super Structures

  1+ ansCandidates need at least one year of production MIG (GMAW) welding experience and must pass the in-house and CWB 47.1 weld tests. Imperial tape-measure reading and willingness to work overtime and weekends are required.

  MIG welding equipment, overhead crane, tape measure, blueprints and shop drawings

• 9j

  Yard Labourer

  Lakefield, ON

  Sur placeTemps plein

  

  WJ Groundwater

  1+ ansCandidates need skid steer experience and licensing, plus knowledge of warehousing, maintenance or construction work. Welding, spray painting, power tool and plumbing or piping experience are expected, and good verbal communication and independent problem solving are essential.

  skid steer, telehandler, forklift, power tools, welding equipment, spray painting equipment

• 10j

  Blasting & Coating Supervisor

  Toronto, ON

  33–47 $/h

  A

  Aecon: (TSX: ARE) is a North American construction and infrastructure development company with global experience.

  5+ ansCandidates need 5+ years of industrial painting, coating or abrasive blasting experience, plus prior supervisory or lead hand experience in a fabrication or industrial setting. A high school diploma is required, and knowledge of coating inspection and spray equipment is essential.

  Spray equipment, Overhead crane, Forklift, Microsoft Office, Abrasive blasting equipment

• 14j

  Welder/Fitter

  Stoney Creek, ON

  

  Fero International Inc: Fero provides sustainable and cost-effective modular solutions to address today’s infrastructure challenges.

  Candidates need structural fitting and welding experience, the ability to read blueprints and use metric and imperial measurements, and crane and rigging skills. A current FCAW certificate or CWB ticket is an asset, along with attention to detail and the ability to work independently and on a team.

  welding equipment, torches, drills, disc grinders, cranes, hoists

• 15j

  Jr Weld Technician

  Vaughan, ON

  30–35 $/hTemps plein

  

  Martinrea International Inc.: The company employs approximately 19,000 skilled and motivated people at more than 58 manufacturing, engineering and technical centers in Canada,…

  1+ ansCandidates need to read and write English and have 1-3 years of similar production experience. They must know electrical troubleshooting, spot and MIG welding and PLC programming, plus quality systems such as IATF16949. An Electro-Mechanical Technician diploma is preferred.

  Weld controllers, Allen Bradley, OMRON

• 17j

  Production Supervisor

  Winnipeg, MB

  Temps plein

  

  Motor Coach Industries: Beyond manufacturing, MCI provides comprehensive aftermarket support, including maintenance, repair, 24/7 roadside assistance, parts, and technician…

  3+ ans3+ gestionMotor Coach Industries needs candidates with at least 3 to 5 years of leadership experience, ideally in manufacturing, and a clear commitment to safety. Experience in a unionized setting, welding, CNC or paint, and good MS Office skills are assets.

  CNC equipment, welding equipment, paint equipment

• 22j

  Vice President of Marketing

  Burnaby, BC

  

  Novarc Technologies Inc: Novarc Technologies is a full-stack robotics company specializing in the design and manufacturing of cobots and AI systems for robotic welding…

  15+ ansCandidates need a Master's degree in marketing, business administration or a related field and at least 15 years of B2B marketing experience, ideally in robotics or technology. Strong leadership, analytics and communication skills are required.

  Google Ads, LinkedIn

• 23j

  Spécialiste en réparation des remorques et des articles de support à la location

  Gatineau, QC

  Temps plein

  UC

  U-Haul Co. (Canada) Ltd.

  Expertise en outils à main, pneumatiques et électriques; Posséder ses propres outils à main; Permis de conduire valide et dossier de conduite propre

  hand tools, air tools, power tools, forklift

• 25j

  Heavy Duty Mechanic

  Saskatoon, SK

  HR

  Hughes Recruitment

  Candidates need hands-on experience repairing heavy equipment, especially excavators, and strong diagnostic and hydraulic skills. A Journeyperson Heavy Duty Mechanic ticket is preferred, apprentices with relevant experience are considered, and a valid Class 5 licence is required.

  forklift, aerial platform, welding equipment, maintenance software

• 29j

  Welder

  Winnipeg, MB

  PR

  Power Recruitment

  1+ ansCandidates need a Registered Apprenticeship certificate and ideally 1 to 2 years of related experience. They must be able to lift 45 kg, work at heights and in confined, hot, noisy outdoor sites, and bring their own vehicle and safety tools.

  arc welding machine, brazing machine, resistance welding machine, gas welding machine, soldering machine, flame-cutting equipment

• 29j

  Perth Millwright

  Perth, ON

  35–45 $/h

  

  Central Wire: Central Wire Group of Companies (CWI) is a world renown manufacturing company that specializes in wire and wire products.

  5+ ansCandidates need a completed apprenticeship and a Red Seal with at least 5 years of experience. They should know health and safety legislation and communicate well, and lead hand experience and CAD skills are assets.

  Lathe, Surface grinder, Welding equipment, CAD

17 entreprises