Emplois “structural schematics” au Canada – Page 2

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 3j

  Field Service Representative

  Toronto, ON

  Temps plein

  EI

  eCAMION Inc.

  3+ ansCandidates need 3+ years of field service or electrical experience, a post-secondary diploma or degree in electrical, electronics or mechatronics, and the ability to read schematics. A valid G driver's licence and willingness to travel extensively are required.

  Multimeter, Oscilloscope, Soldering equipment, PLC, Analygas

  3j

  Electrical Mechanical Technician

  Toronto, ON

  Temps plein

  EI

  eCAMION Inc.

  3+ ansJule needs candidates with about 3 years of electrical or mechanical assembly experience and the ability to read technical drawings. They must use a multimeter, meet physical demands such as lifting up to 50 pounds, and commit to safety rules.

  multimeter, hand tools, power tools, hoists

  3j

  Electrical Commissioning Engineer

  Toronto, ON

  Temps plein

  EI

  eCAMION Inc.

  1+ ansCandidates need a bachelor's degree in electrical engineering or a related field and at least one year of experience in electrical engineering or system commissioning. Strong PLC programming, high-voltage integration skills and willingness to travel extensively across North America are required.

  PLC, Python, Bash, Microsoft Office

• 4j

  Maintenance Worker III

  Fort McMurray, AB

  

  Alberta Health Services

  1+ ansCandidates need a 5th Class Power Engineer certificate (ABSA) or post-secondary or technical training in a related field, a Class 5 Alberta driver's licence, and at least one year of plant operations and maintenance experience. Basic Windows computer skills, mechanical aptitude and the ability to work under pressure are also required.

  boiler, HVAC systems, medical air system, vacuum system, pure water system, building control systems

• 4j

  Sto 24r - senior radio communications technologist

  Vancouver, BC

  81k–92k $/anTemps plein

  BP

  BC Public Service Agency

  5+ ansCandidates need a diploma in electronics or electrical engineering technology with registration or eligibility as an Applied Electronics Technologist, or an engineering bachelor's degree, plus 5 to 7 years of radio communications technologist experience. They also need supervisory experience, radio frequency system design knowledge, a valid BC Class 5 driver's licence, and willingness to obtain a Class 3 licence with air brake endorsement.

  Radio test equipment, Schematics and topographical maps, Forklift, ATV, UTV, Snowmobile

• 4j

  Electrical engineering specialist

  Edmonton, AB

  JC

  Johnson Controls

  15+ ansCandidates need a bachelor's degree in electrical engineering or an electrical engineering technology diploma, at least 15 years of combined electrical design and field installation experience, and strong practical knowledge of power distribution, motor controls and troubleshooting.

  AutoCAD Electrical, Creo, Revit, Bluebeam, ETAP

• 4j

  MPD Technology - Automation Manager

  Calgary, AB

  

  Beyond Energy Services & Technology

  10+ ans3+ gestionBeyond Energy Services & Technology asks for a bachelor's degree in an engineering discipline or equivalent experience, 10+ years in industrial automation including 3+ years leading a team, expert PLC and HMI programming, electrical design software skills, and knowledge of hazardous-area equipment and industrial networks.

  Studio 5000, TIA Portal, FactoryTalk View, WinCC, Ignition, EPLAN

• 4j

  Systems Integrator III

  Burlington, ON

  Temps plein

  DB

  Default Brand

  Candidates need a bachelor's degree in electrical engineering or a related field, or equivalent experience. They need PLC programming, HMI design, schematic interpretation and fiber optic network experience, plus willingness to travel 25-35% of the time.

  PLC, HMI, SCADA, Schneider Electric, SEL RTAC, Allen Bradley

  4j

  Systems Integrator III

  Burlington, ON

  Temps plein

  DB

  Default Brand

  Candidates need a bachelor's degree in electrical engineering or a related field, or equivalent experience. They need PLC programming, HMI design, schematic interpretation and fiber optic network experience, plus willingness to travel 25-35% of the time.

  PLC, HMI, SCADA, Schneider Electric, SEL RTAC, Allen Bradley

• 4j

  Accenture Construct - Electrical Controls Engineer 2, COM

  Windsor, ON

  Temps plein

  

  Accenture Infrastructure & Capital Projects Inc.

  2+ ansCandidates need at least 2 years of related experience and a B.S. in Electrical Engineering. Basic AutoCAD and Microsoft Office skills and PLC or industrial automation familiarity are preferred.

  AutoCAD, EPLAN, Microsoft Office, Rockwell ControlLogix, Siemens Step 7, PLC

• 4j

  Sourcing Specialist

  Ontario

  

  Gwillimdale Farms Ltd

  Gwillimdale Farms needs candidates with procurement and supplier negotiation experience, inventory planning skills, and the ability to read equipment manuals and part lists. Fluency in Spanish is required for communication with the Mexico-based partner and vendors.

  PATH ERP

• 4j

  Red Seal Industrial Maintenance Electrician

  Alberta

  40,73 $/h

  

  CRH

  Candidates need knowledge of electrical safety, the ability to read electrical schematics and blueprints, and working knowledge of three-phase motors, programmable controls and circuits. Hydraulics, mechanics or related trade knowledge is preferred.

  hoist, crane, hand tools, power tools

• 4j

  Electrical Quality Specialist

  Calgary, AB

  

  Spartan Controls Ltd.: Spartan Controls is the leading provider of industrial automation, valves, measurement and process control technology and solutions in Western Canada.

  Spartan Controls needs an engineer or electrical technologist with experience in electrical equipment design review and testing, ideally on medium-voltage switchgear. Candidates should know IEEE C37.20.2, UL 891 and CSA C22.2 No. 31, and be able to use electrical test equipment.

  Relay test sets, Megohmmeter, Ductor, TTR test set, VLF test set, AC HiPot

• 4j

  Maintenance Gasfitter

  Winnipeg, MB

  46,09 $/hTemps plein

  WS

  Winnipeg School Division

  4+ ansWinnipeg School Division needs a journeyperson with a Manitoba Class A Gas Fitter licence and a Red Seal in Steamfitter or Plumber, plus at least four years of commercial or industrial boiler and blueprint experience. Candidates must pass a Vulnerable Sector Criminal Record Check and a Child Abuse Registry check and hold a valid Manitoba 5F driver's licence.

  Microsoft Office, blueprints, schematics

• 4j

  Assemblers Morning

  Burnaby, BC

  25 $/hContrat

  

  Randstad Canada

  Candidates need proven assembly experience with hand and power tools, practical electrical wiring skills, and the ability to read schematics. They also need good manual dexterity, attention to detail, and a commitment to workplace safety and 5S practices.

  Drills, Rivet guns, Saws, Drivers, Caulking guns, Power tools

  4j

  Mechanical Assembler

  Milton, ON

  Contrat

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of mechanical assembly experience using power tools, and the ability to read engineering drawings and models. A high school diploma or equivalent, basic English and eligibility to work in Canada are also required.

  Power tools, Punch press, Band saw, Pallet truck, Ladders, Hand tools

  4j

  Electrical Assembler Milton

  Milton, ON

  21–25 $/hContrat

  

  Randstad Canada

  2+ ansCandidates need at least 2 years of experience in medium to complex non-standard wiring and the ability to read one-line diagrams. A high school diploma or equivalent, eligibility to work in Canada, and residence within 80 km of Milton, Ontario are also required.

  Hand tools, Electrical test equipment, MS Excel, MS Word

• 4j

  Operations Engineer

  Brampton, ON

  HybrideTemps plein

  BC

  Brenntag Canada Inc.

  2+ ansCandidates need a bachelor's degree in engineering (chemical, mechanical or electrical preferred), at least 2 years in a chemical manufacturing environment, and fluent English. Skills needed include reading blueprints, maintaining plant equipment and using Microsoft Office, with AutoCAD and SAP as assets.

  SAP, Microsoft Office, AutoCAD

• 4j

  Architectural Technologist

  North Bay, ON +4

  Temps plein

  E

  EXP

  5+ ansCandidates need an architectural technology or related diploma or degree, a Licensed Technologist designation with OAA or AATO, and 5 to 10 years of architectural firm experience in Ontario. Strong drawing, detailing, Ontario Building Code and construction administration skills are required.

  Autodesk Revit, AutoCAD

• 4j

  Senior Architect – Rail & Transit Facilities

  Toronto, ON

  Sur placeTemps plein

  PI

  Parsons Inc.: Founded in 1944, Parsons Corporation, a digitally enabled solutions provider, is focused on creating the future of the defense, intelligence, and…

  20+ ansCandidates need a CACB-accredited architecture degree or equivalent, a Canadian provincial architect registration, and 20+ years of transit or transportation facility experience. Strong BIM, code and accessibility knowledge, alternative delivery experience, and business development skills are also required.

  Revit, AutoCAD, Navisworks, SketchUp, MicroStation

• 4j

  Manufacturing Technician Specialist

  Mississauga, ON

  60k–70k $/anTemps plein

  P

  PM-Mississauga

  3+ ansJohnson Electric needs candidates with a mechanical or mechatronics diploma or engineering degree, three to five years of high-speed manufacturing experience, and knowledge of finishing processes. They also need APQP, PFMEA, Lean, ISO and IATF experience, and strong problem-solving and training skills.

  AutoCAD, Microsoft Excel, Microsoft Word, Microsoft PowerPoint, CAM software, HMI

• 4j

  Senior Electrical Designer

  Toronto, ON

  Temps plein

  H

  HDR

  5+ ansCandidates need a technical degree or equivalent combined education and experience, at least 5 years of industry experience and ideally 5 years in data center or TMT electrical design. They also need advanced 3D design and coordination software skills, strong Microsoft Office skills and knowledge of electrical codes and standards.

  Microsoft Office, document management systems

• 4j

  Senior Mask Design Engineer - Hardware

  Toronto, ON

  Temps plein

  NC

  NVIDIA Canada Dev. Inc.

  7+ ansCandidates need a BSEE or equivalent, 7+ years in mask and layout design, and deep analog layout knowledge in submicron CMOS. They must be expert in Cadence Virtuoso, experienced with Calibre, Dracula, Hercules and PrimeYield, and skilled in scripting and DRC/LVS flows.

  Cadence Virtuoso, Calibre, Dracula, Hercules, PrimeYield

• 5j

  Principal Analog Mixed Signal Designer - 19497

  Mississauga, ON

  S

  Synopsys

  5+ ansCandidates need a PhD with 5+ years or a Master's with 8+ years of hands-on analog IC design experience. Strong CMOS skills, detailed SerDes sub-circuit design experience and SPICE simulation expertise are required.

  SPICE simulators, Verilog-A, schematic entry tools, physical layout tools, MATLAB, Python

19 entreprises