Emplois “Electrical code specifications” au Canada – Page 22

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 10j

  Camera Design Engineer

  Vancouver, BC

  Sur place

  

  Qualcomm Canada ULC

  3+ ansCandidates need a bachelor's, master's or PhD in a computer, electrical or related engineering field, with 4 to 2 years of hardware or related experience depending on degree. Verilog or VHDL RTL design, design verification and bus protocol experience are key.

  Verilog, VHDL, TCL, Perl, Python

  10j

  FY27 Intern - Camera Systems Internship - Canada (16 months)

  Vancouver, BC

  Sur placeStage

  

  Qualcomm Canada ULC

  Candidates need to be enrolled toward a bachelor's or master's in engineering, computer science or a related field, and be available for a 16-month internship. Experience with microcontrollers, RTOS or ARM architectures, plus Android debugging and version control, is preferred.

  JTAG, ADB, Android development environments, Version-control systems

• 10j

  Intermediate Instrumentation and Controls specialist

  Edmonton, AB +1

  Temps plein

  

  Kleinfelder Inc

  6+ ansCandidates need a P.Tech or P.Eng able to stamp drawings, 6+ years of instrumentation, communication and controls experience in oil and gas including EPC work, and a technical diploma or related degree. Working knowledge of SmartPlant Instrumentation, PLC and communication network design, and strong detail and communication skills are also required.

  SmartPlant Instrumentation, Bluebeam, Adobe, MS Office

  11j

  GIS & AIS Substation Engineer with strong Power Systems engineering capability

  Edmonton, AB +1

  Temps plein

  

  Kleinfelder Inc

  6+ ansCandidates need a bachelor's degree in electrical engineering, with P. Eng or eligibility preferred, and 6–15+ years of high-voltage substation experience across GIS and AIS. They must be living in Alberta, with strong knowledge of HV equipment, studies software and CSA, IEEE, IEC and NFPA standards.

  ETAP, CYME, SKM, PSCAD

• 10j

  HV Transformer Engineer- Mandarin Speaker

  Burnaby, BC

  115k–145k $/anTemps plein

  LE

  Leading Edge

  5+ ansCandidates need a Bachelor's degree in electrical engineering, 5 to 8 years of transformer design or failure analysis experience, and skill in interpreting DGA, SFRA and Tan Delta tests against NETA, CSA and IEEE standards. Full fluency in English and Mandarin, a valid driver's licence and passport, and legal authorization to work in Canada are required.

  Easy Power, ETAP, PSCAD, SKM Tools, SolidWorks, ANSYS Maxwell

• 10j

  Faculty, Electrical Engineering and Technology

  Burnaby, BC

  69k–120k $/anTemps plein

  

  British Columbia Institute of Technology

  5+ ansCandidates need a bachelor's degree in electrical engineering, control systems or a related field, or a technology diploma with substantial experience, plus at least five years of hands-on automation or instrumentation work. Strong English communication and a commitment to inclusive teaching are also required.

  PLC, DCS, HMI, SCADA, Modbus, OPC UA

• 10j

  Electrician

  Edmonton, AB

  Temps plein

  

  Alberta Health Services

  5+ ansCandidates need a Red Seal Journeyperson Electrician certificate, a valid Class 5 Alberta Operator's Licence and at least five years of journeyperson experience, including high-voltage and 600-volt distribution work. Grade 12 or equivalent and clear English are also required.

  Test equipment, Blueprints and schematics, Computerized maintenance system, Microsoft Office

• 10j

  Electrician

  Fort McMurray, AB

  

  Regional Municipality of Wood Buffalo

  3+ ansCandidates need a Certified Journeyperson Electrician ticket, three years of commercial or industrial electrical experience, and strong knowledge of the Canadian Electrical Code. A high school diploma or GED, a valid Class 5 licence, and the ability to obtain an RCMP enhanced reliability clearance are also required.

  PLC, VFD, MCC, SCADA, Microsoft Excel, Microsoft Word

• 10j

  Building structural Engineer

  Repentigny, QC

  

  BPA

  6+ ansCandidates need a civil or construction engineering degree with a structural focus, OIQ membership in good standing, and 6 to 10 years of structural design experience in Canada. Strong numerical analysis skills and excellent French are required.

  ETABS, SAP2000, SAFE, Revit Structure

  10j

  Building structural Engineer

  Longueuil, QC

  

  BPA

  6+ ansCandidates need a civil or construction engineering degree with a structural focus, OIQ membership in good standing, and 6 to 10 years of structural design experience in Canada. Strong numerical analysis skills and excellent French are required.

  ETABS, SAP2000, SAFE, Revit Structure

  10j

  Building Structural Engineer

  Montréal, QC

  

  BPA

  6+ ansCandidates need a civil or construction engineering degree with a structural focus, OIQ membership in good standing, and 6 to 10 years of building structural design experience in Canada. Excellent French and strong numerical analysis skills are required.

  ETABS, SAP2000, SAFE, Revit Structure

• 10j

  Intermediate CAD Designer

  Toronto, ON

  Temps plein

  

  Arcadis

  3+ ansCandidates need a diploma or degree in civil, structural or architectural technology and about 3 to 7 years of structural drafting experience. Strong AutoCAD skills and Revit proficiency are strongly preferred, along with knowledge of concrete, steel, masonry and timber systems.

  AutoCAD, Revit

• 10j

  Jr installer/jr technician

  Toronto, ON

  RC

  Reliance Comfort Limited Partnership o/a Reliance Home Comfort

  Candidates need a G3 gas technician licence (G2 preferred), a valid class G driver's licence, a Grade 12 diploma and a valid ODP card. They must be able to lift up to 75 lbs, communicate well, stay organized and work with minimal supervision.

  Trucks with stocked tools

• 10j

  Senior Project Manager - Electrical Engineer

  Mississauga, ON

  115k $/an

  C

  Cascades

  3+ ansCascades needs a Bachelor's degree in electrical or a related engineering discipline, a Professional Engineer (P.Eng.) designation, and at least 3 years of electrical engineering and project management in manufacturing. Candidates must know power distribution, industrial controls, Allen-Bradley PLCs and the Ontario Electrical Code.

  RsLogix, Studio Logix, VFD

• 11j

  Project Manager

  Saskatoon, SK

  

  ERCO Worldwide

  6+ ansCandidates need a college diploma in engineering technology, 6-10 years of project management and manufacturing process experience, and a strong health and safety mindset. Project management and Lean Manufacturing certifications and a multi-discipline engineering degree are preferred.

  P&ID drawings, Management of Change system

• 11j

  Category Specialist – Turbomachinery

  Calgary, AB

  Temps plein

  TP

  TransCanada PipeLines Limited

  6+ ansCandidates need post-secondary education in a related field and 6 to 8 years of progressive related experience, or an equivalent mix. Strong commercial analysis, contract negotiation and turbomachinery sourcing experience are preferred, along with SAP skills.

  SAP, SCM systems

• 11j

  Intern Bachelors Test Eng

  Kanata, ON

  50k–59k $/anTemps plein

  

  Aerospace: Aerospace’s national workforce of more than 4,600 employees provides objective technical expertise and thought leadership to solve the hardest…

  Candidates need a Bachelor's degree in Electrical, Electronics, Computer, Systems Engineering or Computer Science/IT, earned in April 2029. Hands-on experience with test equipment and networking tools, strong communication skills, and eligibility for controlled goods and security clearance are required.

  spectrum analyzer, network analyzer, power meter, noise figure analyzer, BER tester, LabVIEW

• 11j

  Panel Assembler

  Mississauga, ON

  20–23 $/h

  

  Arrow Speed Controls

  1+ ansArrow Speed Controls needs candidates with electrical experience and VFD control system knowledge, including relay logic and PLC control. They must read schematics, work in English, lift up to 50 lbs, and ideally have 1 to 2 years as an electrician or panel builder.

  hand tools, schematic drawings, BOM

  11j

  Panel Assembler

  Mississauga, ON

  20–23 $/h

  

  Arrow Speed Controls

  1+ ansArrow Speed Controls needs candidates with electrical experience and VFD control system knowledge, including relay logic and PLC control. They must read schematics, work in English, lift up to 50 lbs, and ideally have 1 to 2 years as an electrician or panel builder.

  hand tools, schematic drawings, BOM

• 11j

  First Line Manager, Quality NDE (Temporary/Term)

  Ontario

  Temps plein

  BB

  BPLP Bruce Power L.P.

  8+ ansCandidates need about 8 years of experience in quality control, surveillance, pressure boundary or NDE inspection, plus CGSB Radiography Level II, which is a stated focus area. Familiarity with ASME, ASNT and CSA standards and with nuclear station systems and operations is also required.

  radiography equipment, remotely operated inspection equipment, remote data logging equipment, data processing equipment

• 11j

  Customer Engineering & Reliability - Technical Support (October 30, 2026)

  Mississauga, ON

  Temps plein

  

  GoFleet

  3+ ansCandidates need 3+ years in technical support, application support, customer engineering, QA, implementation or field service, with real examples of diagnosing non-obvious problems. Working knowledge of REST APIs, logs, SQL or MongoDB, networking, scripting, and tools like Postman is needed, along with the legal right to work in Canada.

  Postman, SQL, MongoDB, Python, PowerShell, Bash

• 11j

  Field Service Technician - Laval, QC

  Laval, QC

  Temps plein

  

  Rivian

  Candidates need hands-on automotive repair experience, with EV or hybrid experience an asset, and an Automotive Journeyperson licence (Red Seal strongly preferred). They must hold a valid driver's licence with a clean record, be at least 21, read and speak fluent English, and work well with computers and tools.

  DVOM, Outils à main, Outils électriques, Ordinateur Windows ou Mac

  11j

  Field Service Technician - Laval, QC

  Laval, QC

  

  Rivian

  Rivian needs candidates who are at least 21, hold a valid driver's licence with a clean record, and can lift up to 50 lbs. Hands-on automotive experience is highly preferred, with EV or hybrid repair considered a plus, and entry-level applicants are encouraged to apply.

  Outils à main, Outils électriques, DVOM, Ordinateur portable

• 11j

  Senior Mechanical Engineer – Static Equipment

  Calgary, AB

  75–90 $/hTemps plein

  K

  Kent

  10+ ansCandidates need a mechanical engineering degree, a PEng with APEGA, and 10+ years of experience with pressure vessels, heat exchangers and storage tanks. They must know ASME, API, TEMA and CSA codes and be able to review design calculations.

  COMPRESS, PV Elite

18 entreprises