Emplois “Automotive service equipment” au Canada – Page 3

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 13h

  Licensed 310S Automotive Technician - Jaguar Land Rover Brampton - 26345

  Brampton, ON

  

  Zanchin Automotive Group

  2+ ansCandidates need 2 to 5 years of proven automotive technician experience, a post-secondary diploma or equivalent experience, and a 310S Mechanic License in good standing. They also need a valid driver's licence with a clean driver's abstract and the ability to drive manual and automatic vehicles.

  computerized diagnostic tools, hand tools, specialized automotive repair equipment

  13h

  Vehicle Jockey - JLR Brampton - 25069

  Brampton, ON

  22 $/h

  

  Zanchin Automotive Group

  1+ ansCandidates need 1 to 2 years of experience as a vehicle jockey, a secondary school diploma or equivalent, and a valid driver's licence with a clean driver's abstract. They must drive manual and automatic vehicles and communicate professionally, verbally and in writing.

• 13h

  Service Technician

  Sioux Lookout, ON

  36,92 $/hTemps plein

  SL

  Sioux Lookout GM

  Candidates need strong diagnostic skills across mechanical and electrical systems, a valid G driver's licence, and a Red Seal certification or enough hours to challenge the 310S equivalency. Communication with service advisors and documentation skills are also required.

  diagnostic equipment

• 13h

  Service Technician

  Dryden, ON

  36,92 $/hTemps plein

  DG

  Dryden GM

  Candidates need strong diagnostic skills across mechanical and electrical systems, a valid G driver's licence, and a Red Seal or enough work hours to qualify for the 310S equivalency process. Clear written documentation and good communication with advisors and management are also required.

  Advanced diagnostic equipment

  13h

  Autobody Technician – Dryden GM

  Dryden, ON

  36,92 $/hTemps plein

  DG

  Dryden GM

  Candidates need collision and autobody repair experience, attention to detail, and the ability to read damage and follow OEM procedures. A 310B certification or training toward it and a valid G driver's licence are also required.

  Refinishing preparation tools

• 13h

  Autobody Technician – Fort Frances Collision Center

  Fort Frances, ON

  36,92 $/hTemps plein

  FF

  Fort Frances Collision Center

  Candidates need collision and autobody repair experience, a valid G driver's licence, and a 310B Auto Body and Collision Damage Repairer certification or the training to pursue it. They must follow manufacturer procedures, pay close attention to detail, and work well with estimators and painters.

• 13h

  Automotive Service Technician

  Fort Frances, ON

  36,92 $/hTemps plein

  FF

  Fort Frances GM

  Candidates need Red Seal certification in Automotive Service Technology (310S) or enough trade experience to qualify for the Skilled Trades Ontario equivalency assessment (7,220 hours), plus a valid Class G licence. They need strong diagnostic skills, careful workmanship and clear written and verbal communication.

  diagnostic equipment

• 13h

  Automotive Service Technician

  Fort Frances, ON

  36,92 $/hTemps plein

  SC

  Sunset Country Ford

  Candidates need strong diagnostic skills across mechanical and electrical systems, a valid Class G licence, and a Red Seal in Automotive Service Technology or equivalent experience (7,220 hours). Good communication with advisors and management and careful documentation are also expected.

  advanced diagnostic equipment

• 13h

  Commis aux pièces

  Boucherville, QC

  Temps plein

  CC

  CARQUEST Canada Ltd (720)

  3+ ansCandidates need 3 to 5 years of automotive parts experience, proven sales ability, and working knowledge of automotive systems and diagnostics. They also need a high school diploma, basic math and Microsoft Word and Excel skills. ASE certification is preferred but not required.

  POS system, Parts lookup system, Inventory system, Diagnostic equipment, Microsoft Word, Microsoft Excel

• 13h

  Parts Coordinator - Aviva AutoCare Centre

  Oakville, ON +1

  

  Aviva Canada Inc: Leading insurer for home, auto, lifestyle and Business / Assurance automobile, habitation, mode de vie et entreprise

  1+ ansCandidates need a high school diploma or equivalent and 1-3 years of automotive industry experience, including motor vehicle repair knowledge. They must be detail-oriented, handle a fast-paced environment, and use body shop management software, with Body Shop Connect preferred.

  Body Shop Connect, body shop management software

• 14h

  Field Specialist

  Ontario

  75k–90k $/anHybrideTemps plein

  

  MSX International

  5+ ans2+ gestionCandidates need at least five years in an automotive service environment, a valid driver's licence and a high school diploma. Two years of multi-store supervision, college business training, and strong Microsoft Office skills are also expected.

  Microsoft Office, Ford vehicle

• 14h

  Driver - Cobourg

  Cobourg, ON

  Temps partiel

  

  PartSource

  Candidates need a valid driver's licence and a clean driver's abstract, plus strong teamwork and communication skills. Ability to sit for up to 8 hours and lift up to 50 lbs is required, and automotive aftermarket experience is an asset.

  company vehicle

• 14h

  Truck Vehicle Service Attendant

  Kanata, ON

  20 $/hTemps partiel

  EM

  Enterprise Mobility

  Candidates need to be at least 18 with a valid Ontario G or G2 licence and a clean driving record, able to lift 25 pounds and work the stated schedule. Outside employment is not permitted, and candidates must be authorized to work in Canada without sponsorship.

• 14h

  Outside Sales Representative (Cargo) - Calgary, AB

  Calgary, AB

  

  Wurth Canada Limited: The company is headquartered in Guelph, Ontario, with state-of-the-art distribution centres in Guelph and Mississauga, Ontario, and Acheson,…

  Candidates need a high-school diploma, with post-secondary education in a related field or 1-3 years of relevant work experience. They must hold a valid driver's licence, a clear driver's abstract and a clear criminal record, and be comfortable using an iPad, Microsoft Office and a CRM.

  iPad, CRM system, e-shop

• 14h

  Mechanical Automation Designer

  Concord, ON

  Temps plein

  AC

  ALTEN Canada

  Candidates need a Bachelor of Science or Bachelor of Engineering in Mechanical Engineering, or equivalent engineering technologist education. They need automation and machinery design experience on at least two systems, plus SolidWorks drafting skills and FEA knowledge.

  SolidWorks, MRP system

  14h

  Senior Mechanical Designer (Solidworks Expert)

  Burlington, ON

  Temps plein

  AC

  ALTEN Canada

  10+ ansALTEN Canada needs candidates with 10+ years of design experience or equivalent, strong piping and skid package design skills, advanced SolidWorks proficiency, and the ability to work independently with minimal supervision.

  SolidWorks, Epicor ERP

  16h

  Process Engineer

  Etobicoke, ON

  Temps plein

  AC

  ALTEN Canada

  5+ ansCandidates need a Mechanical or Chemical Engineering degree, 5 to 10 years of process plant experience including gas systems and project leadership, and nuclear industry experience. A P.Eng., knowledge of ASME VIII or III, and skills in SolidWorks or AutoCAD are also expected.

  Aspen, SolidWorks, AutoCAD

  16h

  Electrical and Instrumentation Engineer

  Etobicoke, ON

  Temps plein

  AC

  ALTEN Canada

  5+ ansCandidates need a bachelor's degree in electrical or instrumentation engineering and at least 5 years of electrical or I&C design experience in regulated, project-driven environments. They must be able to read P&IDs, select equipment and instruments, and work with SolidWorks Electrical, AutoCAD Electrical or EPLAN.

  SolidWorks Electrical, AutoCAD Electrical, EPLAN, PLC, DCS

  17h

  Senior Control Engineer

  Woodbridge, ON

  Temps plein

  AC

  ALTEN Canada

  10+ ansALTEN Canada asks for at least 10 years of PLC programming experience with Rockwell or Siemens, including developing systems from scratch. Candidates also need FANUC or ABB robot programming experience, VFD control experience, and the ability to travel to customer sites, mainly in the U.S.

  Rockwell PLC, Siemens PLC, FANUC robot, ABB robot, VFD, motion controllers

  17h

  Senior Mechanical Designer (Water Treatment)

  Oakville, ON

  Temps plein

  AC

  ALTEN Canada

  Candidates need SolidWorks skills and experience with piping systems in water treatment or oil and gas. They should also be committed to a long-term career in this role.

  SolidWorks, AutoCAD Plant 3D

• 16h

  Senior Logistics Centre & Dangerous Goods Specialist

  Mississauga, ON

  

  Mercedes-Benz

  2+ ansMercedes-Benz Canada needs candidates with a college or university diploma in supply chain, logistics, engineering, business or a related field, and at least 2 years in inventory or logistics work. Candidates need Dangerous Goods regulatory knowledge (Transport Canada, IATA, IMDG, TDG), plus SAP, Excel and Power BI skills.

  SAP, Power BI, Excel

  16h

  Senior Logistics Centre & Dangerous Goods Specialist

  Mississauga, ON

  

  Mercedes-Benz

  2+ ansMercedes-Benz Canada needs candidates with a college or university diploma in supply chain, logistics, engineering, business or a related field, and at least 2 years in inventory or logistics work. Candidates need Dangerous Goods regulatory knowledge (Transport Canada, IATA, IMDG, TDG), plus SAP, Excel and Power BI skills.

  SAP, Power BI, Excel

• 16h

  Project Estimating Lead

  Calgary, AB

  Contrat

  

  Brunel

  10+ ans5+ gestionBrunel needs 10+ years of project estimating experience, including 5+ years leading estimates on major capital projects. Candidates need experience across Stage 1 to Stage 4 and in energy, midstream, oil and gas, utilities or petrochemical, plus a relevant bachelor's degree.

  EcoSys, Microsoft Excel, Power BI

• 16h

  Outside Sales Representative

  Winnipeg, MB

  Temps plein

  

  Summit Search Group: Summit Search Group is a leading national recruitment firm committed to helping great employers find smart, motivated people to advance both the…

  Candidates need proven industrial or B2B sales experience and technical aptitude with hydraulic systems and hose products. A valid Class 5 driver's licence and willingness to travel regularly across the territory are required.

  Sales, Customer relations, Customer service, Product knowledge, Mechanical systems, Time management

16 entreprises