Emplois “Dexterity” au Canada – Page 39

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 16j

  PRODUCTION OPERATOR - JBS ONTARIO

  Belleville, ON

  

  JBS Food Canada ULC.

  Candidates need a high school diploma (preferred), one to less than seven months of physically demanding work, ideally in food processing, and basic English. They must be able to lift up to 23 kg, work safely, stand for long periods, and tolerate cold, refrigerated conditions.

  production equipment, pallets

  16j

  SANITOR - JBS ONTARIO

  Belleville, ON

  

  JBS Food Canada ULC.

  Candidates need a high school diploma, some physically demanding work experience (ideally food processing), basic English, the ability to lift up to 23 kg and push or pull sanitation equipment over 50 pounds, and a safety-first attitude.

  hose, sanitation equipment, PPE

  16j

  Production Worker-Brooks, AB

  Brooks, AB

  

  JBS Food Canada ULC.

  Candidates need a high school diploma, 1 to 6 months of full-time experience in a physically demanding job (food processing is an asset), and basic English. They must wear provided PPE and pass a pre-hire medical and drug and alcohol test.

  Wear protective equipment against industrial noise, Packaging, Pack goods, Sanitation, Attention to detail

• 16j

  Aircraft Paint Technician

  Peterborough, ON

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  3+ ansCandidates need secondary school completion and ideally about 3 years of paint preparation or painting experience, such as bus, boat, auto painting or bodywork. They must be physically fit, detail-oriented, able to work independently and in a team, and read, write and speak English.

  dual action sander, hydraulic lift platform, measuring tanks, calibrated rods, suction tubes

  16j

  Aircraft Maintenance Engineer - Structures

  Peterborough, ON +1

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  4+ ansCandidates need secondary school, structural repair training from college or a technical program, and either a recognized apprenticeship or 4+ years of industry experience. A Transport Canada AME S licence is required, along with the ability to read engineering drawings and use hand tools and sheet-metal equipment.

  hand tools, sheet-metal equipment, assembly jigs

  16j

  Aircraft Maintenance Engineer M2

  Peterborough, ON +1

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  3+ ansCandidates need an M2 Aircraft Maintenance Engineer licence, aircraft maintenance college or technical training, and ideally 3+ years of licensed experience on Gulfstream, Bombardier or Embraer jets. They must read engineering drawings and wiring diagrams, work in confined spaces and lift up to 40 lbs.

  Microsoft Word, Microsoft Excel, Microsoft PowerPoint

  16j

  Finish Technician

  Peterborough, ON

  31,23 $/h

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  Candidates need a high school diploma or equivalent, with aviation or aerospace experience preferred. They need basic math with whole numbers, decimals and fractions, good communication and teamwork, and the ability to lift up to 40 lbs and work in shifts, overtime and confined spaces.

  spray equipment

  16j

  Interior Installation (R&I) Technician

  Peterborough, ON +2

  25 $/h

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  1+ ansCandidates need a secondary school diploma (college or technical training preferred) and at least one year of hands-on experience in assembly, manufacturing, construction or installation. They must be able to lift up to 40 lbs and work long periods in protective equipment.

  hand tools

  16j

  Upholstery Technician

  Peterborough, ON

  25–31,23 $/h

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  Candidates need extensive upholstery experience, ideally with seating and leather, plus skill operating industrial sewing machines. A secondary school diploma is required, with aviation experience and college or technical training preferred.

  industrial sewing machine, multi-needle sewing machine, serger, overlock machine, piping machine, binding machine

  16j

  Cabinetry Apprentice

  Peterborough, ON

  25 $/h

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  Candidates need a high school diploma or equivalent, fluent spoken and written English, and working knowledge of Windows and MS Office. They must be detail-oriented, able to multi-task in a team, and work well under pressure and deadlines.

  Power tools, Blueprints and technical manuals, MS Office

  16j

  Upholstery Apprentice

  Peterborough, ON

  25 $/h

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  Candidates need a high school diploma or equivalent and fluent spoken and written English. Working knowledge of Windows and MS Office, teamwork, attention to detail and the ability to work under pressure are also required.

  industrial sewing machine, serger, overlock machine, piping machine, binding machine, power tools

  16j

  Interior Installation Apprentice

  Peterborough, ON

  25 $/h

  

  Flexjet: Flexjet’s fractional aircraft program is the first in the world to be recognized as achieving the Air Charter Safety Foundation’s Industry Audit…

  Candidates need a high school diploma or equivalent and strong English communication. Hands-on experience and aviation or manufacturing training are assets, along with attention to detail, teamwork and basic Windows and MS Office skills.

  hand tools, power tools, MS Office

• 16j

  Maintenance Services Representative

  Burnaby, BC

  

  Campus Living Centres

  1+ ansCandidates need at least 1 year of industry experience, a high school diploma (a college diploma is preferred), and knowledge of commercial electrical, plumbing and HVAC systems. They must be physically fit, handle several projects at once, and complete WHMIS 2015, GHS and OHSA safety training.

  Ladders, Hand tools, Fire extinguishers, Standpipes and fire panel, Utility meters

  16j

  Maintenance Services Representative

  Thunder Bay, ON

  

  Campus Living Centres

  1+ ansCandidates need at least 1 year of industry experience, a high school diploma (a college diploma is preferred), and knowledge of commercial electrical, plumbing and HVAC systems. They must be physically fit, handle several projects at once, and complete WHMIS 2015, GHS and OHSA safety training.

  Ladders, Hand tools, Fire extinguishers, Standpipes and fire panel, Utility meters

  16j

  Maintenance Service Lead

  Victoria, BC

  

  Campus Living Centres

  2+ ansCandidates need at least 2 years of industry experience or equivalent. They need knowledge of commercial electrical, plumbing and HVAC systems, and must be able to handle several projects at once. A high school diploma is required, and a recognized college diploma is preferred.

  fire panel, standpipes, utility meters

• 16j

  Continuous Improvement Maintenance Specialist

  Ontario

  45 $/h

  

  Ice River Sustainable Solutions

  7+ ansCandidates need at least 7 years of manufacturing maintenance, production or continuous improvement experience, and 5 years as a Krones service engineer. They also need a mechanical, electrical or industrial engineering diploma or degree, plus hands-on PLC and automation skills.

  Krones machinery, PLC, forklift

• 16j

  Cleanroom Technician, Fresenius Kabi Canada

  Mississauga, ON

  

  Fresenius Kabi Canada: Fresenius Kabi Canada is a diverse pharmaceutical company committed to supplying high quality, cost-effective pharmaceutical products and services…

  1+ ansCandidates need a Pharmacy Technician diploma or a related post-secondary education, with 1 to 2 years of compounding experience as an asset. They must know GMP and standard operating procedures and pay close attention to detail.

  Production equipment

• 16j

  Crop Care Worker

  Sombra, ON

  17,95 $/hTemps plein

  

  Sunset

  1+ ansCandidates need 1 to under 7 months of verified experience on a greenhouse or field crop farm, plus a self-motivated, team-oriented attitude and the ability to take direction. Flexible hours during high production season are required.

  time recording system

• 16j

  Retail Experience Lead

  Aurora, ON

  F

  FIKA

  2+ ansCandidates need at least 2 years of retail experience, a high school diploma or GED, and a Provincial Cannabis Certification. They should have strong customer service, communication and organization skills, cash management experience, and a clear criminal record.

  desktop computer, sales software, security alarm system

• 16j

  Retail Experience Lead

  Spruce Grove, AB

  L

  Lucid

  2+ ansCandidates need at least 2 years of retail experience, a high school diploma or GED, a clear criminal record, and a Provincial Cannabis Certification. They also need strong customer service, communication, conflict resolution, and cash management skills.

  Desktop computer, Sales software, Security alarm system

• 16j

  Retail Experience Lead

  Calgary, AB

  PR

  Prairie Records

  2+ ansCandidates need at least 2 years of retail experience, a high school diploma or GED, and a Provincial Cannabis Certification. They also need strong customer service, communication, conflict resolution and cash handling skills.

  desktop computer, sales software, security alarm system

• 16j

  Electronics Production Assembler I, II, or III [641]

  Burnaby, BC

  Sur placeTemps plein

  

  D-Wave Quantum

  1+ ansCandidates need a high school diploma and hands-on electronics or electro-mechanical assembly experience, with strong dexterity and attention to detail. Post-secondary technical training is an asset, and the role requires lifting up to 30 lbs and flexibility for peak production periods.

  soldering equipment, microscope, hand tools, basic test equipment

• 16j

  System Designer - AV

  Vancouver, BC

  Temps plein

  

  Bosch Building Technologies

  3+ ansCandidates need a high school diploma and either a two-year technical degree or 3 to 5 years of AV design experience. Bosch Building Technologies asks for two control or DSP certifications, two audio or video distribution certifications, AVIXA CTS, and knowledge of NEC code and AVIXA standards.

  Microsoft Office, CAD, Crestron, Extron, QSC Q-SYS, Biamp Tesira

• 16j

  Production Microscope Soldering Technician

  Burlington, ON

  Temps plein

  EM

  Evertz Microsystems Limited: Evertz Microsystems (TSX:ET) is a leading global manufacturer of broadcast equipment and solutions that deliver content to television sets,…

  Candidates need proven fine-pitch soldering experience using a microscope and experience reworking populated PCBs with multi-pin and area-array parts. Strong manual dexterity, attention to detail, the ability to read technical documents, and comfort working at a microscope for long periods are required.

  Soldering irons, Hot-air rework equipment, Microscope, Desoldering tools, Solder removal equipment

12 entreprises