Emplois “Maintenance and repair tools” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 3m

  Aircraft Maintenance Engineer (AME – M2)

  Hamilton, ON

  Temps plein

  PS

  Professional Staffing

  Valid Transport Canada AME M2 licence ; Ideally, at least one year of licensed experience; Experience with larger commercial aircraft is highly desirable

  18m

  Aircraft Maintenance Engineer (AME – M2)

  Vancouver, BC

  Temps plein

  PS

  Professional Staffing

  1+ ansCandidates need a valid Transport Canada AME M2 licence, ideally with a year of licensed experience. Boeing 757 or 767 endorsements are strong assets, and availability for rotating day and night shifts is required.

  48m

  Aircraft Maintenance Engineer

  Hamilton, ON

  Temps plein

  PS

  Professional Staffing

  1+ ansCandidates need a valid Transport Canada AME M2 licence, ideally at least one year of licensed experience, and a valid ROC-A. They must obtain airport security clearance and airside driving privileges, and work rotating 12-hour shifts, including nights, weekends and holidays.

• 1h

  Component Apprentice

  Delta, BC

  H

  Heli-One: Heli-One is the world’s largest helicopter support company, specializing in maintenance, repair and overhaul.

  Candidates need a high school diploma or equivalent, a basic understanding of aircraft systems and tools, and strong English for reading technical manuals. Legal right to work in Canada and the ability to pass the Controlled Goods Security Program are required.

  Hand tools

• 2h

  Toolroom Attendant

  Burnaby, BC

  63k–68k $/anTemps plein

  

  British Columbia Institute of Technology

  2+ ansCandidates need Grade 12 plus a year of specialized related courses, a valid Class 5 driver's licence, and valid forklift and scissor lift operator licences. Strong organization, safety awareness and clear communication with staff and students are needed.

  forklift, scissor lift, gasboy, WHMIS binder, BCIT inventory system

• 3h

  Regional Maintenance Manager

  Montréal, QC

  Temps plein

  TT

  TEN (Transportation Equipment Network)

  5+ ans5+ gestionCandidates need 5 to 7+ years of shop leadership or management experience, strong fleet or transportation knowledge, and proven skills in scheduling, organization and team motivation. Experience with continuous process improvement and a safety program is required, along with fluency in French and English.

  5h

  Licensed Mobile Trailer Mechanic (310J/310T) | Up to $47/hr + $6,000 Retention Bonus

  Mississauga, ON

  Temps plein

  TT

  TEN (Transportation Equipment Network)

  Candidates need a 310J/310T technician certification and licence, plus proven trailer service technician experience. They must know trailer electrical, suspension, braking and structural systems and be able to lift up to 85 pounds.

  Air brake equipment, ABS diagnostic tools, Welding equipment

• 3h

  Maintenance Millwright

  Brockville, ON

  41,51 $/hTemps plein

  SC

  Shell Canada Ltd

  2+ ansCandidates need a high school diploma or equivalent and must hold or obtain the 433A Industrial Mechanic Millwright Certificate. Two years of production experience, PLC and electrical experience, SAP or CMMS skills, a valid driver's licence, and the physical ability to lift 20 kg and work at heights, in confined spaces and while wearing a respirator are required or preferred.

  SAP, Excel, Word, hand and power tools, electric meters, alignment tools

• 4h

  Engine Shop Manager

  Montréal, QC

  Temps plein

  JA

  JMC Aviation

  Vaste expérience dans un atelier MRO de moteurs à turbine; Expérience de gestion de superviseurs ou chefs d'équipe; Connaissance des publications techniques OEM

  Aerotrac, SAP, AMOS, Ramco

  4h

  Technician- Rolls-Royce M250 Engine

  Dorval, QC

  Temps plein

  JA

  JMC Aviation

  JMC Aviation needs candidates with turbine engine maintenance and repair experience and knowledge of gas turbine design and operation. Familiarity with FAA compliance, airworthiness and traceability rules, plus strong teamwork and fast learning, are required. Experience at a certified MRO facility, with TCCA AMO rules, or on turboprop or turboshaft engines is preferred.

  precision measuring tools, special and precision tooling, OEM manuals, engineering drawings

  5h

  Technician- Rolls-Royce M250 Engine

  Vancouver, BC

  Temps plein

  JA

  JMC Aviation

  JMC Aviation needs candidates with turbine engine maintenance experience and knowledge of gas turbine design and operation. Candidates must understand Transport Canada aviation compliance and documentation, and work well in teams.

  precision measuring tools, shared special and precision tooling

• 4h

  Maintenance Technician Lead

  Toronto, ON

  Temps plein

  SM

  Samco Machinery

  5+ ansSamco Machinery needs candidates with a Millwright certificate, about 5 years of industrial equipment maintenance, and knowledge of safety codes. Strong leadership, organization, communication and the ability to read mechanical and electrical drawings are also required.

  Precision measuring tools, Dial indicator, Forklift, Crane, Scissor lift, Hand drill

• 4h

  Artificial Lift Automation Field Technician (Rotational Role)

  Calgary, AB

  Temps plein

  DE

  DV8 Energy Inc

  3+ ansCandidates need at least 3 years of experience in industrial or oil field settings and experience troubleshooting live electrical equipment. A valid driver's licence and passport are required, along with willingness to travel frequently and undergo a background check.

  Electrical meters, Basic hand tools, Variable speed drives, Edge computing devices, Cellular radios

• 4h

  Maintenance Worker IV

  Calgary, AB

  Temps plein

  

  Alberta Health Services

  5+ ansCandidates need post-secondary or technical certification in a related field, or a 4th Class Power Engineer certificate where boiler support is needed. They also need five to seven years of experience, at least five of them maintaining institutional building systems, plus vendor training on acute care building systems.

  E-Facilities

• 5h

  Industrial Electrician

  Windsor, ON

  Temps plein

  JW

  Jamieson Wellness Inc.

  Candidates need an electrician licence (Red Seal 442A/309A preferred, with 433A dual ticket highly desirable) or a Certificate of Apprenticeship, plus hands-on experience with PLCs, VFDs, robots and industrial automation. They must read equipment drawings and manuals, work with minimal supervision, communicate well in English and be available for three-shift work and overtime.

  PLC, VFD, robots, industrial automation equipment

  5h

  Millwright

  Windsor, ON

  Temps plein

  JW

  Jamieson Wellness Inc.

  Candidates need an Ontario Secondary School Diploma and a 433A ticket, along with electrical, pneumatic and hydraulic knowledge and the ability to read equipment drawings and manuals. They must work independently, be available for three-shift operation with overtime, and communicate well in English at all levels of the organization.

  Auger fillers, Cappers, Labelers, Blenders, Capsule encapsulators, Air compressors

• 5h

  Building Serviceperson I - Mason

  Waterloo, ON

  Temps plein

  

  University of Waterloo: In a complex and rapidly evolving world, WatSPEED at the University of Waterloo is professional education that’s designed to be different.

  5+ ansCandidates need five years of recent mason or concrete finisher experience and a Brick and Stone Mason (401A) or Cement Finisher (244G) certificate. They also need strong knowledge of masonry construction, the ability to read drawings and estimate materials, and a valid Ontario class G licence.

  Archibus, MS Office

  5h

  Building Serviceperson I - Mason

  Waterloo, ON

  Temps plein

  

  University of Waterloo: In a complex and rapidly evolving world, WatSPEED at the University of Waterloo is professional education that’s designed to be different.

  5+ ansCandidates need a Brick and Stone Mason (401A) or Cement Finisher (244G) certificate, at least five years of recent mason or cement finishing experience, and an Ontario Secondary School Diploma. They also need strong blueprint reading, material takeoff skills, a valid Ontario G licence, and the ability to lead others.

  MS Office, Archibus, Mobile phones

• 5h

  Maintenance Technician

  Bolton, ON

  Temps plein

  AE

  Agrocrop Exports Ltd.

  Candidates need hands-on manufacturing experience with electrical and mechanical systems and strong troubleshooting skills. An electrician licence and PLC and HMI troubleshooting and programming skills are required, and the ability to read schematics and blueprints is needed.

  PLC, HMI, MS Word, MS Excel, MS Outlook

• 5h

  Instrumentation & Control Technician

  Montréal, QC

  Temps plein

  TP

  The People Co.

  5+ ansCandidates need a bachelor's degree in mechanical, electrical or manufacturing engineering or a related field, plus over five years of relevant experience. They must read electrical schematics and P&IDs, work in Ladder Logic and FBD, know industrial networks such as Ethernet/IP, and be fluent in French and English.

  Allen-Bradley PLC, HMI, SCADA, Ethernet/IP

• 5h

  Maintenance Technician

  Brampton, ON

  Temps plein

  IS

  InVision Staffing Services Inc.

  5+ ansCandidates need 5+ years maintaining industrial equipment and automation, knowledge of mechanical, electrical and hydraulic systems, and basic MIG and TIG welding. An associate degree in mechanical engineering or a similar field and familiarity with safety standards are also expected.

  PLC, Hand and portable tools, Welding equipment, Measuring instruments, Building management system

• 6h

  Service Technician

  Ancaster, ON

  Temps plein

  AC

  AERZEN Canada Inc.

  2+ ansAERZEN Canada Inc. requires two to four years of mechanical repair experience, ideally with rotating equipment, and a certificate in industrial or heavy equipment mechanics or equivalent experience. A valid driver's licence and professional English are required, and French is also required for roles in Eastern Canada.

  Salesforce, MS Office, ERP, forklift, overhead crane

• 6h

  Maintenance Millwright

  Canada

  Temps plein

  CE

  Canadian Executive Search Group (USA) Inc / Division of Arrow Group of Companies

  1+ ansCandidates need a valid 433A Millwright Certificate of Qualification, a completed Canadian apprenticeship and at least one year in high-volume manufacturing. They must troubleshoot mechanical problems, read blueprints, communicate clearly in English, own a full set of tools and work midnight shifts.

  hand tools, power tools, overhead cranes, tow motors, aerial lifts, industrial measuring equipment

  6h

  Maintenance Electrician

  Canada

  Temps plein

  CE

  Canadian Executive Search Group (USA) Inc / Division of Arrow Group of Companies

  1+ ansCandidates need a valid 442A or 309 Electrician Certificate of Qualification, a completed Canadian apprenticeship, and at least 1 year in a high-volume manufacturing environment. They must have strong electrical troubleshooting skills, blueprint reading ability, clear English communication, their own complete toolbox, and willingness to work midnights and about one weekend in five.

  Hand tools, Power tools, Overhead cranes, Tow motors, Aerial lifts, Industrial measuring equipment

16 entreprises