Emplois “Schematics and circuit plans” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1m

  Project Manager

  Winnipeg, MB

  Temps plein

  T

  Tavoron

  Work with vendors and internal teams to ensure materials, equipment, and resources are available when required.; Research, evaluate, and select appropriate products, components, and applications based on project requirements, technical…

• 21m

  Systems Designer

  Pitt Meadows, BC

  Temps plein

  E

  Epiroc

  Decompose high‑level system requirements into subsystem and component‑level requirements and support traceability through design and validation; Participate in system safety activities, including risk assessments, FMEA…

  41m

  Firmware Developer

  Pitt Meadows, BC

  Temps plein

  E

  Epiroc

  2+ ansCandidates need an engineering degree or diploma, at least 2 years of firmware development experience, and in-depth knowledge of embedded systems, communication protocols such as CAN and Ethernet, and Linux. Experience writing unit test frameworks in C/C++ or Python is also required.

  Multimeter, Oscilloscope, Power analyzer, Spectrum analyzer, Qt, React

• 32m

  Signal Maintainer - Sault Ste, Marie, ON

  Sault Ste. Marie, ON

  Temps plein

  W

  Watco

  Candidates need a valid driver's licence, high school or GED, and the ability to read electrical diagrams and test procedures. Prior railroad signal experience or electrical/electronics training is preferred, and candidates must complete railroad safety and signal training.

  Test instruments, Schematics and circuit plans, Signal test equipment

• 32m

  Embedded Systems Design & DSP Engineer

  Newmarket, ON

  Temps plein

  L

  Lotek

  5+ ansCandidates need an MSEE or BSEE and at least 5 years of relevant experience, with current digital signal processing skills, low-power circuit design, and bare-metal embedded C programming. Experience with ARM microprocessors, sensors, PCB layout and EMI/EMC is an asset.

  Altium, OrCAD, PSPICE, MATLAB

• 37m

  Electrical and Electronics Developer

  Mississauga, ON

  Temps plein

  E

  Electrovaya

  8+ ansElectrovaya needs candidates with at least 8 years of circuit design experience, ideally on battery or energy storage systems, plus strong analog and digital design skills and knowledge of battery safety standards. A bachelor's degree in electrical or electronics engineering is required, and a master's is preferred.

  OrCAD, Altium, Allegro, JIRA, Confluence

• 37m

  Test Technician

  Ottawa, ON

  Temps plein

  G

  Gogo

  4+ ansCandidates need at least 4 years of hands-on experience testing and repairing electronic systems, plus an electronics technician diploma or equivalent. They must read schematics, use test instruments, follow structured quality processes and work well with teams.

  multimeter, circuit testers, thermal chambers, spectrum analyzer, power meter

• 41m

  Field Service Mechanic

  Fort Saskatchewan, AB

  Temps plein

  HR

  Herc Rentals

  3+ ansCandidates need a Journeyman Off Road certification or HET Red Seal in Heavy Duty, at least 3 years of hands-on aerial equipment repair, and a valid Class 5 licence with a clean driving record. They must lift 50 pounds frequently, work indoors and outdoors, and be on call every other week.

  Diagnostic tools, Laptop/tablet diagnostic software, Fleet management system, Electrical measuring instruments

  1h

  Field Service Mechanic - Husky Site

  Fort McMurray, AB

  Temps plein

  HR

  Herc Rentals

  3+ ansCandidates need a Journeyman Mechanic (Off Road) Certificate or Red Seal in HET, at least 3 years of hands-on aerial equipment experience and a valid Class 5 licence. They must pass a clean driver's abstract check and drug and alcohol screening, and must be clean shaven.

  Diagnostic tools, Laptop/tablet diagnostic software, Hand tools, Measuring instruments, Fleet management system

• 41m

  Electrical Engineer / System Integrator

  North Vancouver, BC

  Temps plein

  C

  Canal

  Canal needs candidates with a bachelor's degree or diploma in electrical engineering or a related field, plus experience designing electrical generation, distribution, SCADA or integrated control systems. Marine experience, CAD skills in AutoCAD or CADMATIC, and intermediate MS Office skills are assets.

  AutoCAD, AutoCAD Electrical, CADMATIC, MS Word, MS Excel, MS Outlook

  46m

  Senior Electrical Engineer

  North Vancouver, BC

  Temps plein

  C

  Canal

  5+ ansCandidates need a bachelor's degree in engineering, P.Eng registration (complete or in progress), and at least 5 years of marine or industrial high and low voltage power system design. Strong power system analysis, protection design, and IEEE/IEC standards knowledge are required.

  ETAP, SKM, AutoCAD, AutoCAD Electrical, CADMATIC, EPLAN

• 46m

  Electrical Cabinet Assembly Technician

  Ottawa, ON

  Temps plein

  S

  STERIS

  1+ ansCandidates need knowledge of electronic components, electrical safety and electro-mechanical tools, plus one year of related experience and an associate's or vocational/technical credential. Soldering, schematic interpretation and strong attention to detail are preferred.

  Oscilloscope, Soldering iron, Electro-mechanical tools, Schematics and bills of materials

• 46m

  Journeyman Electrician

  Kananaskis, AB

  Temps plein

  

  Resorts of the Canadian Rockies

  2+ ansCandidates need journeyman status, 2 to 5 years of electrical maintenance experience in a resort setting, and knowledge of the Canadian Electrical Code and CSA Z-98. They also need PLC, motor and drive experience, lockout/tagout skills, comfort working at heights, and a valid Class 5 licence.

  voltmeter, ammeter, PLC, test instruments

• 56m

  Power Electronics Engineer

  Richmond, BC

  Contrat

  FT

  Foreseeson Technology

  3+ ansCandidates need a bachelor's degree in electrical engineering or a related field, at least three years of power electronics experience, and experience with low- and high-voltage system design. Strong knowledge of DC power systems, energy storage, battery safety and circuit simulation tools is also required.

  LTspice, PSpice, MATLAB/Simulink, oscilloscopes, power analyzers, electronic loads

  1h

  Senior Electrical Engineer

  Richmond, BC

  Contrat

  FT

  Foreseeson Technology

  5+ ansCandidates need a Bachelor's degree in electrical or electronics engineering and at least five years of professional experience. Strong PCB design skills in Altium Designer, microcontroller knowledge and good communication are required.

  Altium Designer, SolidWorks Electrical, Microsoft Excel

• 1h

  Test Operator / Opérateur(trice) de test

  Montréal, QC

  Temps plein

  D

  dormakaba

  Diplôme d'études secondaires ou équivalent; Dextérité manuelle et acuité visuelle; Expérience en assemblage électronique et en soudure

  Oscilloscope, Multimeter, Frequency counter, Test jig, Soldering iron

• 3h

  Electronics Engineer, Diagnostics & Data Acquisition

  Richmond, BC

  140k–170k $/anHybrideTemps plein

  GF

  General Fusion Inc.

  10+ ansCandidates need a bachelor's degree in electrical or electronics engineering, at least 10 years of progressive experience deploying electronic systems, and expertise in analog signal conditioning and high-speed digitization. Strong technical leadership, PCB design skills and clear communication with multidisciplinary teams are also required.

  Altium, LTSpice, LabVIEW, Beckhoff TwinCAT, PLC, Python

  3h

  Electrical Engineer (Controls and Infrastructure)

  Richmond, BC

  100k–140k $/anHybrideTemps plein

  GF

  General Fusion Inc.

  5+ ansCandidates need a bachelor's degree in electrical engineering, P.Eng. registration or eligibility with EGBC, and 5+ years of hands-on experience taking control panels from schematic to commissioning. Strong PLC programming skills in IEC 61131-3 and knowledge of the Canadian Electrical Code are also required.

  Beckhoff TwinCAT, multimeter, insulation resistance tester, oscilloscope, AutoCAD Electrical, EPLAN

• 3h

  Senior Electrical Engineer

  Oakville, ON

  140k–160k $/an

  NN

  Natus Neuro

  6+ ansNatus Neuro needs a candidate with at least 6 years of electrical engineering design and testing experience and a bachelor's or master's degree. The candidate should know circuit analysis, signal processing and control systems, and be familiar with FDA, CE and ISO 13485 requirements.

  Altium, Cadence, SPICE, MATLAB

• 9h

  Journeyman electrician

  Nisku, AB

  JC

  Johnson Controls

  Candidates need a licensed Journeyperson Electrician certification and experience with machinery and electrical maintenance. They must read blueprints and schematics well, communicate clearly, and follow Alberta safety rules.

  Blueprints, Schematics, Vendor manuals

• 11h

  Apprentice Electrician

  Bonnyville, AB

  27,63–38,25 $/hTemps plein

  PE

  PTW Energy Services Ltd.

  Candidates need to be an indentured 1st to 4th year electrical apprentice with a provincial regulatory body, plus H2S Alive, Fall Protection, Standard First Aid and CSTS 2020. They must read electrical drawings and schematics, have a valid driver's licence, and be willing to work heights, confined spaces, outdoor conditions, shifts and weekends.

  PLC, Electrical drawings, P&IDs

• 12h

  Mechanical Assembler

  Langley, BC

  28,44 $/hSur placeTemps plein

  RB

  Regal Beloit Canada ULC

  Candidates need prior electrical or mechanical experience, strong analytical skills and the ability to use hand and power tools. They must be able to lift 30 lbs, work with minimal supervision, and read technical drawings and schematics.

  Power tools, Hand tools, Jig saws, Grinders, Pneumatic tools, Cutters

• 13h

  Electrical Engineering Student – Buildings (Summer 2027) - 4-12 Term

  Whitehorse, YT +1

  Sur placeTemps plein

  

  Stantec

  Candidates need to be working toward an Electrical Engineering Technology diploma or an electrical engineering degree, with basic knowledge of the Canadian Electrical Safety Code. Strong communication, organization and attention to detail are required, with AutoCAD, Revit or lighting software as an asset.

  AutoCAD, Revit

• 13h

  Electronics Engineer

  Calgary, AB

  52–60 $/hContrat

  

  Actalent: Actalent is an operating company of Allegis Group, the global leader in talent solutions.

  3+ ansCandidates need a bachelor's degree or higher in electrical engineering or a related field and at least 3 years of electronics design experience. Strong PCB layout skills in Altium Designer, DFM and EMC knowledge, and embedded systems experience are required.

  Altium Designer, electronic test equipment, AI analysis tools

19 entreprises