Emplois “isolation drawings” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 5h

  Crane Service Technician

  Toronto, ON

  Temps plein

  CC

  Canadian Crane & Hoist Mfg. Ltd.

  4+ ansCandidates need at least 4 years of experience troubleshooting, inspecting, maintaining and repairing overhead cranes, with both electrical and mechanical skills. Canadian Crane & Hoist Mfg. Ltd. also requires fluent English, strong customer service, a valid Ontario G licence with a clean driving record, and the ability to work at heights and travel with short notice.

  Customer service, Inspection, Material handling, Cope with pressure, Problem solving, Communication skills

• 8h

  Lead Mechanical Design Engineer

  Vaughan, ON +2

  110k–150k $/anTemps plein

  

  Modern Niagara

  5+ ansCandidates need a mechanical engineering degree and a P.Eng. in good standing with Professional Engineers Ontario, or eligibility to obtain it within six months. They need 5 to 8 or more years of mechanical design experience, healthcare or institutional project experience, and knowledge of HVAC, plumbing, piping, controls, fire protection and the relevant codes.

  Revit, Navisworks, Bluebeam, Microsoft Office

• 9h

  Senior Commissioning Technologist

  Edmonton, AB

  Temps plein

  

  Iconic Power Systems Inc.

  5+ ansCandidates need an electrical engineering diploma or degree, 5+ years of power systems commissioning experience (high voltage substations preferred), and experience with protective relays and test equipment. A valid Class 5 driver's licence and willingness to travel are required.

  Omicron, Doble, Megger, multimeter, power analyzer, SCADA

• 10h

  Design Support Technician

  Greater Sudbury, ON

  31,70–46,50 $/hTemps plein

  W

  WSP

  WSP needs a diploma in Civil Engineering Technology or a related field, plus drafting or design-support experience on municipal infrastructure. Candidates should know AutoCAD and Civil 3D and civil design fundamentals such as grading, servicing and drainage.

  AutoCAD, Civil 3D

  10h

  Intermediate Structural Designer – Resources

  Greater Sudbury, ON

  Temps plein

  W

  WSP

  6+ ansWSP needs candidates with a civil engineering technology or structural engineering diploma or degree and 6+ years of structural drafting experience. Strong AutoCAD and Revit skills, knowledge of Ontario and National Building Codes, and willingness to do field work are also required.

  AutoCAD, Revit

  2j

  Civil Engineering Inspector

  Thornhill, ON +1

  Temps plein

  W

  WSP

  Candidates need a Certified Technician or Technologist designation, or equivalent civil engineering education and experience. Construction inspection, municipal or utility experience, a valid Ontario driver's licence, and the ability to work outdoors in all weather are required.

  Daily inspection logs

  2j

  Senior Mechanical / Layout Designer (Sudbury)

  Greater Sudbury, ON

  Temps plein

  W

  WSP

  Candidates need a college diploma or technical credential in mechanical engineering technology, design, or drafting, plus substantial mining or heavy industry layout experience. Advanced skill with plant design and 3D CAD tools, and experience leading design packages, is required.

  CAD

  2j

  Structural Designer - Mining (Sudbury)

  Greater Sudbury, ON

  Temps plein

  W

  WSP

  Candidates need a college diploma or technical credential in civil or structural engineering technology, drafting or a related field, or equivalent experience. They should have structural drafting experience, working knowledge of steel and concrete detailing with CAD and BIM tools, and attention to detail. Mining, industrial or point-cloud experience is preferred.

  2j

  Senior Structural Designer (Sudbury)

  Greater Sudbury, ON

  Temps plein

  W

  WSP

  Candidates need a college diploma or technical credential in civil or structural engineering technology, drafting or a related field, or equivalent experience. Extensive structural design and drafting experience in mining or heavy industry, plus advanced 2D and 3D design software skills, are required.

• 22h

  Work Face Planner

  Cochrane, ON

  Temps plein

  NE

  Northern Employment Solutions Inc

  5+ ansCandidates need a diploma or degree in engineering, construction management or a related field, plus 5 to 15 years of industrial or mining construction experience. Knowledge of construction sequencing, work packaging and Primavera P6 is required, and AWP methodology is highly desirable.

  Primavera P6

• 23h

  Mechanical Project Engineer (Process Plant)

  Ontario

  Contrat

  PC

  Phase Consulting

  8+ ansCandidates need a mechanical engineering degree, a valid P.Eng. in Canada, and about 8 to 10 years of project experience. Hands-on mining process-plant upgrade experience, consultant coordination and constructability review are required.

  P&ID

  1j

  Workface Planner (Capex)

  Ontario

  Contrat

  PC

  Phase Consulting

  5+ ansCandidates need 5 to 15 years of industrial or mining construction experience, including mega projects, and a diploma or degree in engineering or construction management. Strong construction sequencing and work packaging knowledge, Primavera P6 proficiency, and the ability to read drawings, specifications and schedules are essential.

  Primavera P6

• 1j

  Electrical Inspector

  British Columbia

  Contrat

  CP

  Contract Professionals Canada Inc.

  10+ ansCandidates need a Red Seal journeyperson electrician, 10+ years of electrical experience in oil and gas or heavy industrial construction, and at least 3 years in inspection or QA/QC. They also need knowledge of the Canadian Electrical Code, safety tickets, and a valid Class 5 licence.

  Megger, Microsoft Office, Procore, WinPCS, ProjectWise

• 1j

  Decommissioning Lead

  Ottawa, ON

  Temps plein

  M

  Mantu

  8+ ansCandidates need a degree in an engineering or pharmaceutical science discipline and at least 8 years in pharmaceutical manufacturing or validation. They need hands-on oral solid dose experience, an end-to-end decommissioning project, and working knowledge of GMP, GAMP 5, ASTM E2500 and FDA 21 CFR Part 11.

  SAP PM, CMMS, Kneat, PLC, HMI, SCADA

• 1j

  Industrial Maintenance Technician

  Vaughan, ON

  Temps plein

  PG

  Pangeo Group

  3+ ansPangeo Group needs candidates with 3+ years of hands-on industrial maintenance or mechanical troubleshooting experience, strong welding and machining skills, and the ability to read drawings and manuals. A secondary school diploma is required, and a technical credential is an asset.

  CMMS, QMS, forklift, overhead crane, CNC machines, hydraulic press

• 1j

  LOTO Coordinator

  Edmonton, AB

  Contrat

  GE

  Global Edge Group

  10+ ansCandidates need 10+ years of industrial construction, maintenance, operations or commissioning experience, with hands-on LOTO and hazardous-energy isolation work on major projects such as oil and gas or petrochemical facilities. They must read P&IDs and single-line diagrams and coordinate several contractors in an active field setting.

  P&IDs, single-line diagrams, LOTO register

• 1j

  Field Service Representative

  British Columbia

  Temps plein

  

  Insight Global: Insight Global is an international talent and consulting company that delivers business outcomes in an ever-changing world.

  6+ ansCandidates need a Bachelor's in Electrical Engineering with 6+ years of experience, or a certified Communications/Electronics Technician qualification with 8+ years of hands-on experience. They also need strong electrical troubleshooting skills, a valid driver's licence, and a passport.

  multimeter, oscilloscope, multifunction process calibrator, hand tools, power tools

• 1j

  Journeyperson HD Mechanic

  Edmonton, AB

  

  West Coast Reduction

  Candidates need a valid Alberta Journeyperson Heavy Duty Mechanic certificate or Red Seal, plus an Alberta Commercial Vehicle Safety Inspection licence. They must be able to lift up to 50 lbs and work in confined spaces, at heights and in cold conditions.

  computerized diagnostic devices, skid-steers, vacuum pumps, fork loaders, hydraulic equipment

  1j

  HD Mechanic - Journeyperson

  Calgary, AB

  

  West Coast Reduction

  Candidates need a valid Alberta Journeyperson Heavy Duty Mechanic certificate or Interprovincial Red Seal, a valid Class 3 licence with air, and the ability to lift up to 50 lbs and work in confined spaces, heights and cold weather. Three years of truck repair experience is an asset.

  Computerized diagnostic equipment, Hand tools, Vacuum pumps, Hydraulic equipment, Fork loaders

• 1j

  Senior Construction Manager

  Edmonton, AB

  Sur placeTemps plein

  

  Stantec

  10+ ansCandidates need at least 10 years of construction management experience on brownfield or live-generation projects, including outage coordination and natural gas transmission safety. Certifications such as CSTS, energy isolation, ground disturbance and First Aid/CPR, plus a Class 5 licence, are required.

  Computers

• 1j

  Mechanical Installer/General Technician

  St. Catharines, ON

  Temps plein

  D

  Duke

  Candidates need hands-on mechanical and electrical installation skills, the ability to read technical drawings and electrical codes, and strong troubleshooting ability. Good communication and teamwork are also expected.

  Plumbing, HVAC, Circuit diagrams, Wire harnesses, Troubleshoot, Control systems

• 1j

  WTP Maintenance Planner

  Edmonton, AB

  70,24 $/hTemps plein

  

  EPCOR

  5+ ansCandidates need a Journeyman Electrician and Journeyman Instrument Technician certification, at least 5 years of progressive electrical and instrumentation experience, and a Grade 12 or GED. A valid Class 5 Alberta licence with a clean driving record and a willingness to work outdoors in all weather are also required.

  IVARA CMMS, bill of materials, diagrams and drawings

• 1j

  Maintenance Mechanic

  Burnaby, BC

  76k $/anTemps plein

  

  British Columbia Institute of Technology

  2+ ansCandidates need a valid Trades Qualification or Interprovincial Trades Ticket as a Millwright, a valid driver's licence, and two years of general trades experience plus up to four years of relevant building trades experience. Strong troubleshooting, organization and customer service skills are needed.

  Hoisting and rigging equipment, Computer for work orders

• 1j

  Oshawa Power | Control Room Operator

  Oshawa, ON

  44,99–59,23 $/h

  

  The MEARIE Group

  4+ ansCandidates need a three-year electrical engineering technology diploma or equivalent utility experience, the MEARIE Operator-in-Training Program and EDA Journeyperson Electrical Operator certification, and a current UWPC certification. At least four years of electrical distribution or control room experience with SCADA, ADMS and GIS is also required.

  SCADA, ADMS, GIS, Microsoft Office

17 entreprises