Emplois “Blueprints and schematic drawings” au Canada – Page 15

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 1 mois

  Electrician Journeyman

  Abbotsford, BC

  Sur placeTemps plein

  

  Silver Hills Bakery

  1+ ansCandidates need a Red Seal certification and at least one year of relevant experience. Strong computer skills, math and mechanical ability, and good verbal and written communication are also required.

  MS Office

  1 mois

  Millwright

  Mission, BC

  Sur place

  

  Silver Hills Bakery

  1+ ansCandidates need at least one year of relevant experience and a Red Seal Millwright certification. Strong mechanical, mathematical and problem-solving skills, good computer skills with MS Office, and clear verbal and written communication are required.

  hand tools, power tools, hoisting and lifting devices, cranes, lathes, grinders

• 1 mois

  Journeyperson Electrician

  Calgary, AB

  Sur placeTemps plein

  

  HighLine Electrical

  Candidates need a Journeyperson Red Seal ticket and experience with streetlights, trenching and traffic signals. IMSA Traffic Signal certification and concrete pouring experience are considered assets.

  concrete, survey stakes

• 1 mois

  HVAC Technician

  Winnipeg, MB

  

  Staffmax

  Candidates need a Refrigeration and Air Conditioning Mechanic/Journeyperson licence, strong diagnostic skills and a valid driver's licence. Commercial or industrial service experience and a Gas Fitter Class B licence are preferred.

  HVAC, Journeyperson, Troubleshoot, Technical drawings, Troubleshooting, Gas fitter

• 1 mois

  Millwright

  Bradford, ON

  65 $/hTemps plein

  AC

  AFIMAC Canada

  1+ ansCandidates need a valid 433A Industrial Mechanic certificate of qualification, at least one year of millwright experience in a manufacturing environment, and Grade 12 or equivalent. Fluent written and spoken English and familiarity with computerized maintenance management systems are required.

  Hand and power tools, Welding equipment, Hydraulic equipment, Pneumatic equipment, Computerized maintenance management system

  1 mois

  Millwright

  Belleville, ON

  65 $/hTemps plein

  AC

  AFIMAC Canada

  1+ ansCandidates need a valid 433A Industrial Mechanic certificate of qualification, at least one year of millwright experience in a manufacturing environment, and Grade 12 or equivalent. Fluent written and spoken English and familiarity with computerized maintenance management systems are required.

  Hand and power tools, Welding equipment, Hydraulic equipment, Pneumatic equipment, Computerized maintenance management system

  1 mois

  Millwright

  Barrie, ON

  65 $/hTemps plein

  AC

  AFIMAC Canada

  1+ ansCandidates need a valid 433A Industrial Mechanic certificate of qualification, at least one year of millwright experience in a manufacturing environment, and Grade 12 or equivalent. Fluent written and spoken English and familiarity with computerized maintenance management systems are required.

  Hand and power tools, Welding equipment, Hydraulic equipment, Pneumatic equipment, Computerized maintenance management system

  1 mois

  Millwright

  Kitchener, ON

  65 $/hTemps plein

  AC

  AFIMAC Canada

  1+ ansCandidates need a valid 433A Industrial Mechanic certificate of qualification, at least one year of millwright experience in a manufacturing environment, and Grade 12 or equivalent. Fluent written and spoken English and familiarity with computerized maintenance management systems are required.

  Hand and power tools, Welding equipment, Hydraulic equipment, Pneumatic equipment, Computerized maintenance management system

  1 mois

  Millwright

  Ottawa, ON

  65 $/hTemps plein

  AC

  AFIMAC Canada

  1+ ansCandidates need a valid 433A Industrial Mechanic certificate of qualification, at least one year of millwright experience in a manufacturing environment, and Grade 12 or equivalent. Fluent written and spoken English and familiarity with computerized maintenance management systems are required.

  Hand and power tools, Welding equipment, Hydraulic equipment, Pneumatic equipment, Computerized maintenance management system

  1 mois

  Millwright

  Sault Ste. Marie, ON

  65 $/hTemps plein

  AC

  AFIMAC Canada

  1+ ansCandidates need a valid 433A Industrial Mechanic certificate of qualification, at least one year of millwright experience in a manufacturing environment, and Grade 12 or equivalent. Fluent written and spoken English and familiarity with computerized maintenance management systems are required.

  Hand and power tools, Welding equipment, Hydraulic equipment, Pneumatic equipment, Computerized maintenance management system

  1 mois

  Millwright

  Hamilton, ON

  65 $/hTemps plein

  AC

  AFIMAC Canada

  1+ ansCandidates need a valid 433A Industrial Mechanic certificate of qualification, at least one year of millwright experience in a manufacturing environment, and Grade 12 or equivalent. Fluent written and spoken English and familiarity with computerized maintenance management systems are required.

  Hand and power tools, Welding equipment, Hydraulic equipment, Pneumatic equipment, Computerized maintenance management system

• 1 mois

  Domtar - millwright (noc 72400)

  Thunder Bay, ON

  36–41 $/hTemps plein

  

  Groupe Perspective

  3+ ansCandidates need at least 3 years of millwright or industrial maintenance experience, a high school diploma or equivalent, and English. Reading blueprints and schematics and repairing hydraulic and mechanical equipment are essential.

  Blueprints, Schematic drawings, Hydraulic systems, Conveyors, Pumps, Power transmission belts

• 1 mois

  Instrumentation & controls technician

  New Westminster, BC

  44,08 $/h

  

  Fraser Health Authority

  5+ ansCandidates need a graduate of a recognized electronic technology program and five years of recent field experience, plus any required vendor certifications. Strong skills in building automation, HVAC, DDC and VFD systems, and the ability to read blueprints, are needed.

  Blueprints and schematic drawings

  1 mois

  Instrumentation & Controls Technician

  New Westminster, BC

  44,08 $/h

  

  Fraser Health Authority

  5+ ansCandidates need a graduate of a recognized electronic technology program and five years of recent field experience, or an equivalent mix of education and training. Industry and vendor certifications are required where applicable, along with strong communication skills and the ability to read blueprints.

  Building automation software

• 1 mois

  Industrial plumber

  Red Deer, AB

  OS

  Olymel S.E.C.

  Candidates need a valid Journeyperson Plumber certification and previous industrial plumbing experience. Experience with stainless steel, steam and process-water systems, and the ability to read technical drawings, are preferred.

  pumps, valves

• 1 mois

  Installation Technician

  Richmond Hill, ON

  Sur placeTemps plein

  

  Umbrella: • Cloud Managed Networks: Provides comprehensive (full stack) cloud and network management solutions focusing on cybersecurity and maintenance,…

  Candidates need hands-on experience installing and troubleshooting network cabling and access control or video surveillance systems, and the ability to read technical drawings. A valid driver's licence and willingness to travel and work at heights are required.

  hand tools, ladders

• 1 mois

  Field Service Technician - Rig Technologies Aftermarket Service

  Leduc, AB

  Sur placeTemps plein

  N

  NOV

  Candidates need basic electrical and mechanical skills, experience with schematics and blueprints, and strong verbal and written communication. A Class 5 driver's licence and a passport are required, and oilfield experience and an Alberta apprenticeship or Millwright or Heavy Duty Mechanic background are assets.

  overhead crane, jib crane, forklift

• 1 mois

  Journeyman electrician (rotating day shift)

  Edmonton, AB

  JC

  Johnson Controls

  Silent-Aire needs a licensed Journeyperson Electrician with machinery and equipment experience, strong blueprint-reading skills, and the ability to communicate clearly in writing and speech. Experience supervising apprentices and routine electrical maintenance is an asset.

  Journeyperson, Assembly, Documentation, Regulatory compliance, Control systems, Troubleshoot

  1 mois

  Facility maintenance electrician

  Toronto, ON

  36,04 $/h

  JC

  Johnson Controls

  5+ ansCandidates need a 309A or 442A electrician licence, a strong grasp of electrical and mechanical systems, and flexibility for on-call, weekend and holiday work. Lifting up to 50 lbs and working at heights are required, with five or more years of facility maintenance experience preferred.

  CMMS, Metasys, Hand tools, Blueprints, Electrical drawings

  1 mois

  Fire alarm installer

  Delta, BC

  28–40 $/h

  JC

  Johnson Controls

  Candidates need a college diploma in fire protection, electronics, electrical apprenticeship or equivalent experience, plus skill reading blueprints and using hand tools and multimeters. They must be able to lift 50-70 lbs, work at heights up to 40 feet, travel, work flexible hours, and hold a valid Class 5 driver's licence.

  Digital analyzer, Commissioning devices, Hand tools, Ladders, Scaffolding, High lift equipment

• 1 mois

  Machinist

  Lloydminster, AB

  22–32 $/hTemps plein

  

  Upstream Data Inc: Upstream Data manufactures and services portable bitcoin mining loadcenters for the upstream oil and gas and power generation sectors.

  2+ ansCandidates need a high school diploma and at least 2 years of conventional and CNC machining experience in industry. Precision measuring tools, G-code programming and fluent English are required; an Alberta Journeyman, Red Seal or apprentice registration is highly preferred.

  CNC lathe, CNC mill, conventional lathe, milling machine, saw, micrometer

• 1 mois

  Millwright (Rotating/Steady Midnights)

  Ingersoll, ON

  Temps plein

  A

  AMTB

  5+ ansCandidates need a Licensed Industrial Millwright (433A) in Ontario and at least 5 years of automotive or heavy manufacturing experience. Strong mechanical aptitude with hydraulics, pneumatics, conveyors and gear systems, and willingness to work shifts, weekends and overtime, are also required.

  hand tools, power tools, vibration analysis equipment, thermography equipment, CMMS, PLC

  1 mois

  Tool & Die Maker (Midnights)

  Ingersoll, ON

  Temps plein

  A

  AMTB

  3+ ansCandidates need a Tool and Die certification and at least 3 years of experience as a tool maker in manufacturing, ideally in steel blanking or metal stamping. They should be skilled with manual machines, precision measuring tools and technical drawings, and be detail-oriented with strong problem-solving skills.

  lathe, grinder, overhead crane, precision measuring instruments, hand tools, machine shop tools

• 1 mois

  Industrial Mechanic (Millwright) Apprentice or Industrial Electrician Apprentice

  Collingwood, ON

  Temps plein

  DB

  Default Brand

  Candidates need to be registered Ontario apprentices (433A Millwright or 442A Industrial Electrician) with a secondary school diploma or equivalent. They need mechanical aptitude, good teamwork and communication skills, and the ability to work safely in a manufacturing environment.

  SAP PM, CMMS, PLC, blueprints, wiring diagrams

13 entreprises