Emplois “Plant Document Control System” au Canada

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 5h

  Senior Mechanical Engineer

  Pickering, ON

  TT

  Tetra Tech

  10+ ansCandidates need a four-year mechanical engineering degree and a P.Eng in Ontario, plus preferably 10 or more years of design consulting experience. They must be able to obtain a federal security clearance and work under tight schedules.

  flow analysis software, pipe stress analysis software

  5h

  Senior P&C Engineer

  Mississauga, ON +4

  TT

  Tetra Tech

  4+ ansCandidates need a bachelor's or master's in electrical engineering, a P.Eng. or PE registration, and 4+ years of protection and control experience on transmission, distribution, HVDC or renewable projects. Strong knowledge of protective relays, SCADA, IEC 61850 and SEL, GE or Siemens relays is required.

  ETAP, ASPEN, CYME, EasyPower, SKM, PSCAD

  5h

  Intermediate Mechanical Engineer - Hydro

  Mississauga, ON +4

  TT

  Tetra Tech

  6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  5h

  Intermediate Mechanical Engineer - Hydro

  Vancouver, BC +4

  TT

  Tetra Tech

  6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  5h

  Intermediate Instrumentation and Controls Engineer

  Pickering, ON +1

  TT

  Tetra Tech

  5+ ansTetra Tech needs candidates with a preferred electrical, electronic, mechatronic or electromechanical engineering degree and P.Eng registration or eligibility. Experience with industrial instrumentation, PLCs, PID controllers and safety instrumented systems is needed, and the candidate must be able to obtain a security clearance.

  PLC, schematic capture tools, BOM generation tools

  5h

  Intermediate Electrical Engineer – Heavy Industrial/Nuclear

  Mississauga, ON +1

  TT

  Tetra Tech

  4+ ansCandidates need a bachelor's degree in electrical engineering, a P.Eng. in Ontario or progress toward one, and 4-8 years of electrical engineering experience in heavy industry or power generation. Knowledge of the Canadian Electrical Code, CSA and IEEE standards, and power system studies is needed, with ETAP an asset.

  ETAP

• 5h

  Grounds Lead Hand

  Thunder Bay, ON

  Temps plein

  LU

  Lakehead University

  Lakehead University needs a horticulture diploma or related degree, extensive professional grounds or landscaping experience, and proven ability to supervise a unionized crew. Candidates also need deep plant biology knowledge and expert, WHMIS-compliant chemical safety skills.

  grounds machinery, snow removal equipment

• 5h

  Instrumentat/SCADA Support/Op

  Canada

  24,88–38,04 $/hTemps plein

  

  Ontario Clean Water Agency

  Candidates need an Instrumentation and Control technical program completion or Certificate of Qualification, with extensive experience in instrumentation, PLC, SCADA and medium voltage work. A valid Class G driver's licence and strong documentation and health and safety skills are also required.

  PLC, SCADA, Lucity, CMMS

• 5h

  Journeyman Instrumentation Technician

  Battleford, SK

  45 $/hTemps plein

  PE

  PTW Energy Services Ltd.

  PTW Energy Services needs a journeyman instrumentation technician with a journeyman certificate, Red Seal preferred, and current H2S Alive, Fall Protection, First Aid and CSTS 2020 tickets. Candidates need hands-on experience with Allen-Bradley PLCs, DCS and HMI systems, and the ability to read P&IDs and electrical drawings.

  Multimeters, Loop calibrators, Oscilloscopes, CMMS, Allen-Bradley PLC, DCS

  5h

  Journeyman Instrumentation

  Rocky Mountain House, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need a Journeyman Instrumentation Technician certificate and experience with industrial instrumentation, Allen-Bradley PLCs and DCS. Valid H2S Alive, Fall Protection, First Aid and CSTS 2020 tickets and a driver's licence are required.

  Allen-Bradley PLC, DCS, HMI, Multimeter, Loop calibrator, Oscilloscope

  5h

  Journeyman Instrumentation Technician

  Brooks, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need a Journeyman Instrumentation Technician certificate (Red Seal preferred), experience with Allen-Bradley PLCs, DCS and HMI systems, and the ability to read electrical drawings and P&IDs. Valid H2S Alive, Fall Protection, Standard First Aid, CSTS 2020 and a driver's licence are required, along with flexibility for shift work and overtime.

  Allen-Bradley PLC, DCS, HMI, Multimeters, Loop calibrators, Oscilloscopes

  5h

  Electrial Journeyperson

  Fort McMurray, AB

  52 $/hTemps plein

  PE

  PTW Energy Services Ltd.

  5+ ansCandidates need a Red Seal Journeyperson Electrician certificate and at least 5 years of industrial electrical maintenance experience. They also need H2S Alive, Fall Protection, First Aid, CSTS 2020 and a Class 5 driver's licence.

  test instruments, electrical diagnostic equipment, hand tools

• 8h

  DCN Manufacturing Engineer

  Calgary, AB

  Temps plein

  

  SLB

  3+ ansCandidates need a bachelor's degree in engineering or equivalent manufacturing experience, plus 3-7 years in manufacturing engineering. They should know Lean and Six Sigma, fabrication, assembly and testing, and be legally authorized to work in Canada without sponsorship.

  SAP ERP, Power BI, Power Apps, AutoCAD, Excel

• 9h

  Licensed 310t mechanic afternoon shift sign-on bonus $10 000

  Mount Forest, ON

  44,92 $/hTemps plein

  WM

  Waste Management Canada

  2+ ansCandidates need at least 2 years of mechanic experience on heavy equipment or trucks, a valid 310T Mechanic licence, and a valid driver's licence upon hire. High school, technical training and ASE certifications are preferred.

  fleet maintenance software, diagnostic equipment, hand tools

• 10h

  Electrical Reliability Lead

  Cardinal, ON

  106k–141k $/anTemps plein

  IC

  Ingredion Canada Corporation

  3+ ansCandidates need a bachelor's degree in electrical engineering or 3 to 6 years of industrial experience, with knowledge of electrical distribution, power systems and hazardous locations. Experience with PLCs, DCS, motors, VFDs and electrical codes, plus leadership and project management skills, is required.

  Allen Bradley PLC, Modicon PLC, Foxboro I/A DCS, Aspen IP.21, Motor soft starters

• 10h

  Integrated Operations Centre (IOC) Specialist

  Grande Prairie, AB

  Contrat, Temporaire

  

  adecco

  5+ ansCandidates need at least 5 years of oil and gas experience, including artificial lift operation (plunger lift, rod pump) and SCADA knowledge such as Cygnet or XSPOC. A valid Class 5 driver's licence and high school diploma are required.

  SCADA, Cygnet, XSPOC, WellView, Microsoft Office, SAP

• 10h

  Senior Process Engineer*** Analyste principale, ingénieur de procédés

  Clarkson, ON

  81k–102k $/anTemps plein

  IM

  IPEX Management Inc.

  10+ ans10+ ans d'expérience en ingénierie de procédés, extrusion de plastique; Formation en génie mécanique, chimique ou industriel; Expérience en amélioration continue, Lean Six Sigma un atout

  Extrusion equipment, Extrusion dies, Process instrumentation, Compounding equipment

  10h

  Senior Process Engineer*** Analyste principale, ingénieur de procédés

  Clarkson, ON

  81k–102k $/anTemps plein

  IM

  IPEX Management Inc.

  10+ ansCandidates need 10+ years of process engineering experience, mostly in plastics extrusion, and an engineering background in mechanical, chemical or industrial engineering. Strong project management, leadership, and ISO, health and safety and environmental systems skills are required; Lean Six Sigma is an asset.

  Extrusion equipment, Extrusion dies, Process instrumentation, Compounding equipment

• 10h

  Quality Inspector in Oakville

  Oakville, ON

  23–25 $/hSur placeTemps plein

  

  Thermon: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions.

  Candidates need a high school diploma or equivalent, good communication skills, and the ability to read electrical and mechanical drawings and inspection test plans. They also need metrology skills with measuring tools such as calipers and micrometers, and comfort with fractions and metric measurements.

  Vernier calipers, Micrometers, Tape measure, Gauges, Measuring instruments

• 11h

  Maintenance Technician - Millright

  Delta, BC

  Temps plein

  

  Sunrise Soya Foods: Sunrise Soya Foods, founded in 1956, has grown to become Canada's leading tofu manufacturer.

  3+ ansSunrise Soya Foods needs a candidate with a Red Seal Industrial Mechanic (Millwright) or Fourth-Class Power Engineer ticket, 3-5 years of industrial maintenance experience, and experience operating boilers and steam systems. Strong mechanical troubleshooting and CMMS familiarity are required.

  CMMS, PLC, Variable frequency drives, Welding equipment, Forklift, Boom lift

• 13h

  Commissioning Instrumentation Lead (Instrumentation Red Seal)

  Edmonton, AB

  80 $/hContrat

  

  Grizzlytrek Group: "Technical & Indigenous Staffing Company"

  7+ ans5+ gestionCandidates need a Red Seal Journeyman Instrumentation ticket, 7 to 15 years of experience with 5 years leading commissioning and start-up, and six safety tickets. Strong electrical, instrumentation and automation skills in power generation and protection relay testing are required.

  P&IDs, single line diagrams, loop diagrams, VFDs

• 13h

  Tax Manager - Remote

  Toronto, ON

  TélétravailTemps plein

  J

  Jeeter

  5+ ansCandidates need at least five years of progressive tax experience, strong knowledge of IRC Section 280E and cannabis taxation, and skill with inventory costing and multi-state filings. A bachelor's degree in accounting, finance or taxation is required, and a CPA is strongly preferred.

  Excel, Dynamics 365 Business Central

• 14h

  Supervisor – Electrical Assembly

  Brant, ON

  TI

  Tigercat Industries

  2+ ans2+ gestionTigercat Industries needs a candidate with at least 2 years of supervisory or production leadership experience in manufacturing, who can read wiring diagrams and engineering drawings and understands electrical components and assembly processes. Lean manufacturing knowledge, health and safety knowledge and Microsoft Office and ERP skills are also needed.

  Microsoft Office, ERP systems, Wiring diagrams, Engineering drawings

• 14h

  Machine Operator 1 - Production - Night

  Toronto, ON

  GA

  Give and Go Foods

  1+ ansGive and Go Foods needs candidates with at least one year of machine operator experience in manufacturing, a high school education or equivalent, and the ability to read and write English. Strong problem-solving, teamwork and time management skills are required.

  packaging machine, SPC weight control system, totes and bins, film packaging materials

15 entreprises