Emplois “Plant Document Control System” au Canada – Page 4

Aucun filtre correspondant. Essayez un autre nom.

Résultats

• 17h

  Intermediate Mechanical Engineer - Hydro

  Vancouver, BC +4

  TT

  Tetra Tech

  6+ ansCandidates need a mechanical engineering degree and a P.Eng. in Canada, plus about 6 to 10 years of progressive engineering experience. Hydropower or water resources project experience with turbines, penstocks, gates and hydraulic steel structures is required, along with knowledge of CSA and ASME codes.

  Procurement, Mechanical systems, Mechanical engineering, Documentation, Design principles, Inspection

  17h

  Intermediate Instrumentation and Controls Engineer

  Pickering, ON +1

  TT

  Tetra Tech

  5+ ansTetra Tech needs candidates with a preferred electrical, electronic, mechatronic or electromechanical engineering degree and P.Eng registration or eligibility. Experience with industrial instrumentation, PLCs, PID controllers and safety instrumented systems is needed, and the candidate must be able to obtain a security clearance.

  PLC, schematic capture tools, BOM generation tools

  17h

  Intermediate Electrical Engineer – Heavy Industrial/Nuclear

  Mississauga, ON +1

  TT

  Tetra Tech

  4+ ansCandidates need a bachelor's degree in electrical engineering, a P.Eng. in Ontario or progress toward one, and 4-8 years of electrical engineering experience in heavy industry or power generation. Knowledge of the Canadian Electrical Code, CSA and IEEE standards, and power system studies is needed, with ETAP an asset.

  ETAP

• 17h

  Journeyman Instrumentation Technician

  Battleford, SK

  45 $/hTemps plein

  PE

  PTW Energy Services Ltd.

  PTW Energy Services needs a journeyman instrumentation technician with a journeyman certificate, Red Seal preferred, and current H2S Alive, Fall Protection, First Aid and CSTS 2020 tickets. Candidates need hands-on experience with Allen-Bradley PLCs, DCS and HMI systems, and the ability to read P&IDs and electrical drawings.

  Multimeters, Loop calibrators, Oscilloscopes, CMMS, Allen-Bradley PLC, DCS

  17h

  Journeyman Instrumentation

  Rocky Mountain House, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need a Journeyman Instrumentation Technician certificate and experience with industrial instrumentation, Allen-Bradley PLCs and DCS. Valid H2S Alive, Fall Protection, First Aid and CSTS 2020 tickets and a driver's licence are required.

  Allen-Bradley PLC, DCS, HMI, Multimeter, Loop calibrator, Oscilloscope

  17h

  Journeyman Instrumentation Technician

  Brooks, AB

  Temps plein

  PE

  PTW Energy Services Ltd.

  Candidates need a Journeyman Instrumentation Technician certificate (Red Seal preferred), experience with Allen-Bradley PLCs, DCS and HMI systems, and the ability to read electrical drawings and P&IDs. Valid H2S Alive, Fall Protection, Standard First Aid, CSTS 2020 and a driver's licence are required, along with flexibility for shift work and overtime.

  Allen-Bradley PLC, DCS, HMI, Multimeters, Loop calibrators, Oscilloscopes

  17h

  Electrial Journeyperson

  Fort McMurray, AB

  52 $/hTemps plein

  PE

  PTW Energy Services Ltd.

  5+ ansCandidates need a Red Seal Journeyperson Electrician certificate and at least 5 years of industrial electrical maintenance experience. They also need H2S Alive, Fall Protection, First Aid, CSTS 2020 and a Class 5 driver's licence.

  test instruments, electrical diagnostic equipment, hand tools

• 20h

  DCN Manufacturing Engineer

  Calgary, AB

  Temps plein

  

  SLB

  3+ ansCandidates need 3-7 years of manufacturing engineering experience, a related engineering degree and knowledge of Lean and Six Sigma. Canadian work authorization without sponsorship is required.

  SAP, Power BI, Power Apps, AutoCAD, Microsoft Excel, VBA

• 20h

  Licensed 310t mechanic afternoon shift sign-on bonus $10 000

  Mount Forest, ON

  44,92 $/hTemps plein

  WM

  Waste Management Canada

  2+ ansCandidates need at least 2 years of mechanic experience on heavy equipment or trucks, a valid 310T Mechanic licence, and a valid driver's licence upon hire. High school, technical training and ASE certifications are preferred.

  fleet maintenance software, diagnostic equipment, hand tools

• 21h

  Electrical Reliability Lead

  Cardinal, ON

  106k–141k $/anTemps plein

  IC

  Ingredion Canada Corporation

  3+ ansCandidates need a bachelor's degree in electrical engineering or 3 to 6 years of industrial experience, with knowledge of electrical distribution, power systems and hazardous locations. Experience with PLCs, DCS, motors, VFDs and electrical codes, plus leadership and project management skills, is required.

  Allen Bradley PLC, Modicon PLC, Foxboro I/A DCS, Aspen IP.21, Motor soft starters

• 21h

  Integrated Operations Centre (IOC) Specialist

  Grande Prairie, AB

  Contrat, Temporaire

  

  adecco

  5+ ansCandidates need at least 5 years of oil and gas experience, including artificial lift operation (plunger lift, rod pump) and SCADA knowledge such as Cygnet or XSPOC. A valid Class 5 driver's licence and high school diploma are required.

  SCADA, Cygnet, XSPOC, WellView, Microsoft Office, SAP

• 21h

  Senior Process Engineer*** Analyste principale, ingénieur de procédés

  Clarkson, ON

  81k–102k $/anTemps plein

  IM

  IPEX Management Inc.

  10+ ans10+ ans d'expérience en ingénierie de procédés, extrusion de plastique; Formation en génie mécanique, chimique ou industriel; Expérience en amélioration continue, Lean Six Sigma un atout

  Extrusion equipment, Extrusion dies, Process instrumentation, Compounding equipment

  21h

  Senior Process Engineer*** Analyste principale, ingénieur de procédés

  Clarkson, ON

  81k–102k $/anTemps plein

  IM

  IPEX Management Inc.

  10+ ansCandidates need 10+ years of process engineering experience, mostly in plastics extrusion, and an engineering background in mechanical, chemical or industrial engineering. Strong project management, leadership, and ISO, health and safety and environmental systems skills are required; Lean Six Sigma is an asset.

  Extrusion equipment, Extrusion dies, Process instrumentation, Compounding equipment

• 22h

  Quality Inspector in Oakville

  Oakville, ON

  23–25 $/hSur placeTemps plein

  

  Thermon: Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions.

  Candidates need a high school diploma or equivalent, good communication skills, and the ability to read electrical and mechanical drawings and inspection test plans. They also need metrology skills with measuring tools such as calipers and micrometers, and comfort with fractions and metric measurements.

  Vernier calipers, Micrometers, Tape measure, Gauges, Measuring instruments

• 22h

  Maintenance Technician - Millright

  Delta, BC

  Temps plein

  

  Sunrise Soya Foods: Sunrise Soya Foods, founded in 1956, has grown to become Canada's leading tofu manufacturer.

  3+ ansSunrise Soya Foods needs a candidate with a Red Seal Industrial Mechanic (Millwright) or Fourth-Class Power Engineer ticket, 3-5 years of industrial maintenance experience, and experience operating boilers and steam systems. Strong mechanical troubleshooting and CMMS familiarity are required.

  CMMS, PLC, Variable frequency drives, Welding equipment, Forklift, Boom lift

• 1j

  Commissioning Instrumentation Lead (Instrumentation Red Seal)

  Edmonton, AB

  80 $/hContrat

  

  Grizzlytrek Group: "Technical & Indigenous Staffing Company"

  7+ ans5+ gestionCandidates need a Red Seal Journeyman Instrumentation ticket, 7 to 15 years of experience with 5 years leading commissioning and start-up, and six safety tickets. Strong electrical, instrumentation and automation skills in power generation and protection relay testing are required.

  P&IDs, single line diagrams, loop diagrams, VFDs

• 1j

  Tax Manager - Remote

  Toronto, ON

  TélétravailTemps plein

  J

  Jeeter

  5+ ansCandidates need at least five years of progressive tax experience, strong knowledge of IRC Section 280E and cannabis taxation, and skill with inventory costing and multi-state filings. A bachelor's degree in accounting, finance or taxation is required, and a CPA is strongly preferred.

  Excel, Dynamics 365 Business Central

• 1j

  Machine Operator 1 - Production - Night

  Toronto, ON

  GA

  Give and Go Foods

  1+ ansGive and Go Foods needs candidates with at least one year of machine operator experience in manufacturing, a high school education or equivalent, and the ability to read and write English. Strong problem-solving, teamwork and time management skills are required.

  packaging machine, SPC weight control system, totes and bins, film packaging materials

• 1j

  Quality Technician

  Vaughan, ON

  20–22 $/hTemps plein

  

  Martinrea International Inc.: The company employs approximately 19,000 skilled and motivated people at more than 58 manufacturing, engineering and technical centers in Canada,…

  2+ ansCandidates need training in a quality-related field and two years of related experience, ideally in weld, inspection or industrial fabrication environments. Strong communication, organization, problem solving and project management skills are required, along with knowledge of GD&T, metrology and statistical process control.

  Metrology equipment, Calibration equipment, Defect tracking reports

• 1j

  Applications Engineer and Quotations Specialist

  Quebec

  

  Innomotics

  5+ ansCandidates need an electrical engineering degree or engineering technology diploma, and eligibility for an E.I.T., C.E.T., P.Eng. or P.Tech. designation. They need 5+ years in mining or heavy industry, and strong knowledge of motors, VFDs, power systems and motor control.

  ANEMA Motors, VFDs, Drive systems, Switchgear

• 1j

  Electrical Engineer

  Vancouver, BC

  Sur placeTemps plein

  NW

  North West Redwater Partnership

  5+ ansNorth West Redwater Partnership needs a Bachelor's in Electrical Engineering, Alberta P.Eng or EIT registration, and 5 years of engineering experience in an EPC or heavy industrial setting. Candidates also need knowledge of the Canadian Electrical Code and IEEE standards.

  ETAP, SmartPlant Electrical, SmartPlant Design Tools, Power Management System

  1j

  Electrical Engineer

  Toronto, ON

  Sur placeTemps plein

  NW

  North West Redwater Partnership

  5+ ansNorth West Redwater Partnership needs a Bachelor's in Electrical Engineering, Alberta P.Eng or EIT registration, and 5 years of engineering experience in an EPC or heavy industrial setting. Candidates also need knowledge of the Canadian Electrical Code and IEEE standards.

  ETAP, SmartPlant Electrical, SmartPlant Design Tools, Power Management System

  1j

  Electrical Engineer

  Alberta

  Sur placeTemps plein

  NW

  North West Redwater Partnership

  5+ ansNorth West Redwater Partnership needs a Bachelor's in Electrical Engineering, Alberta P.Eng or EIT registration, and 5 years of engineering experience in an EPC or heavy industrial setting. Candidates also need knowledge of the Canadian Electrical Code and IEEE standards.

  ETAP, SmartPlant Electrical, SmartPlant Design Tools, Power Management System

• 1j

  Automation System Programmer

  Newfoundland and Labrador

  TS

  Tata Steel Minerals Canada Ltd

  4+ ansCandidates need a bachelor's or technologist diploma in electrical, automation, controls or computer engineering, plus at least 4 years of industrial programming and automation experience. Hands-on work with Modicon, Allen-Bradley and Siemens PLCs, Wonderware and industrial networks is required. Ability to work safely at a remote mine site is also needed.

  Schneider Modicon Quantum, Allen-Bradley ControlLogix, Siemens S7, Wonderware ArchestrA, PI System, ConneXium switches

16 entreprises